• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.90-98
• /
• 2021

Piezoelectric ceramic fiber composite (PCFC) was fabricated using a planar electrode printed piezoelectric ceramic fiber driven in transverse mode for small-scale wind energy harvester applications. The PCFC consisted of an epoxy matrix material and piezoelectric ceramic fibers sandwiched by interdigitated electrode (IDE) patterned polyimide films. The PCFC showed an excellent mechanical performance under a continuous stress. For the fabrication of PCB cantilever harvester, five -PCFCs were vertically attached onto a flexible printed circuit board (PCB) substrate, and then PCFCs were serially connected through a printed Cu circuit. The energy harvesting performance was evaluated applying an inverted structure, which imples its free leading edge located at an open end but the trailing edge at a clamped end, to enhance strain energy in a wind tunnel. The output voltage of the PCB cantilever harvester was increased as the wind speed increased. The maximum output power was 17.2 ㎼ at a resistance load of 200 ㏀ and wind speed of 9 m/s. It is considered that the PCB cantilever energy harvester reveals a potential use for wind energy harvester applications.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권4호
• /
• pp.37-40
• /
• 2007

As power demands increase, development of the superconducting fault current limiter (SFCL) is being watched with interest. Many types of SFCLs using various superconducting materials have been developed. Especially, the FCL using coated conductor (CC) has been investigated actively at present. CCs have many advantages for the FCL application. YBCO materials used in CCs have a high n-value, and it is relatively easy to choose a matrix of the CC for high resistivity. If the CC has high resistivity, high voltage can be applied to the CC. Then total length of the CC used in SFCL, which has effects on total price and volume of the SFCL, can be reduced. Short circuit tests of two different types of CCs in the liquid nitrogen bath and its sub-cooled condition were performed and analyzed. An effect of high resistivity of the CC and cooling methods on fault current limiting characteristics could be verified in this paper.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.1-17
• /
• 2023

This paper deals with the free vibration behavior of rotating composite beams reinforced with carbon nanotubes (CNTs) under uniform thermal loads. The temperature-dependent beam material is assumed to be a mixture of single-walled carbon nanotubes (SWCNTs) in an isotropic matrix and five different functionally graded (FG) distributions of CNTs are considered according to the variation along the thickness, namely the UD-uniform, FG-O, FG-V, FG-Λ and FG-X distributions where FG-V and FG-Λ are unsymmetrical patterns. Considering the Timoshenko beam theory (TBT), a new finite element formulation of functionally graded carbon nanotube reinforced composite (FGCNTRC) beam is created for the first time. And the effects of several essential parameters including rotational speed, hub radius, effective material properties, slenderness ratio, boundary conditions, thermal force and moments due to temperature variation are considered in the formulation. By implementing different boundary conditions, some new results of both symmetric and non-symmetrical distribution patterns are presented in tables and figures to be used as benchmark for further validation. In addition, as an alternative advanced composite application for rotating systems exposed to thermal load, the positive effects of CNT addition in improving the dynamic performance of the system have been observed and the results are presented in several tables and figures.

• 한국동물생명공학회지
• /
• 제38권3호
• /
• pp.121-130
• /
• 2023

Background: Coating a culture plate with molecules that aid in cell adhesion is a technique widely used to produce animal cell cultures. Extracellular matrix (ECM) is known for its efficiency in promoting adhesion, survival, and proliferation of adherent cells. Gelatin, a cost-effective type of ECM, is widely used in animal cell cultures including feeder-free embryonic stem (ES) cells. However, the optimal concentration of gelatin is a point of debate among researchers, with no studies having established the optimal gelatin concentration. Methods: In this study, we coated plastic plates with gelatin in a concentration-dependent manner and assessed Young's modulus using atomic force microscopy (AFM) to investigate the microstructure of the surface of each plastic plate. The adhesion, proliferation, and differentiation of the ESCs were compared and analyzed revealing differences in surface microstructure dependent on coating concentration. Results: According to AFM analysis, there was a clear difference in the microstructure of the surface according to the presence or absence of the gelatin coating, and it was confirmed that there was no difference at a concentration of 0.5% or more. ES cell also confirmed the difference in cell adhesion, proliferation, and differentiation according to the presence or absence of gelatin coating, and also it showed no difference over the concentration of 0.5%. Conclusions: The optimum gelatin-coating for the maintenance and differentiation of ES cells is 0.5%, and the gelatin concentration-mediated microenvironment and ES cell signaling are closely correlated.

• Advances in nano research
• /
• 제16권4호
• /
• pp.353-363
• /
• 2024

The incorporation of nanoplatelets in composite and polymeric materials represents a recent and innovative approach, holding substantial promise for diverse property enhancements. This study focuses on the application of nanocomposites in the production of sports equipment, particularly soccer balls, aiming to bridge the gap between theoretical advancements and practical implications. Addressing the longstanding challenge of suboptimal interaction between carbon nanofillers and epoxy resin in epoxy composites, this research pioneers inventive solutions. Furthermore, the investigation extends into unexplored territory, examining the integration of glass fiber/epoxy composites with nanoparticles. The incorporation of nanomaterials, specifically expanded graphite and graphene, at a concentration of 25.0% by weight in both the epoxy structure and the composite with glass fibers demonstrates a marked increase in impact resistance compared to their nanomaterial-free counterparts. The research transcends laboratory experiments to explore the practical applications of nanocomposites in the design and production of sports equipment, with a particular emphasis on soccer balls. Analytical techniques such as infrared spectroscopy and scanning electron microscopy are employed to scrutinize the surface chemical structure and morphology of the epoxy nanocomposites. Additionally, an in-depth examination of the thermal, mechanical, viscoelastic, and conductive properties of these materials is conducted. Noteworthy findings include the efficacy of surface modification of carbon nanotubes in preventing accumulation and enhancing their distribution within the epoxy matrix. This optimization results in improved interfacial interactions, heightened thermal stability, superior mechanical properties, and enhanced electrical conductivity in the nanocomposite.

• Archives of Reconstructive Microsurgery
• /
• 제15권2호
• /
• pp.92-100
• /
• 2006

Radial forearm free flap (RFFF) has been established itself as a versatile and widely used method for reconstruction of the head and neck, although it is still criticized for high mortality of donor site. Delayed wound healing, cosmetic deformity, vascular compromise and potentially reduced wrist function have many plastic surgeons hesitate to adapt it as a first choice in micro-reconstruction. To overcome these drawbacks, some techniques for donor-site repair such as V-Y advancement with full thickness skin graft (FTSG), application of artificial dermis ($Terudermis^{(R)}$) or acellular dermal matrix ($AlloDerm^{(R)}$), and double-opposing rhomboid transposition flap have been reported. Authors performed 4 cases of RFFF in old-aged patients of the head and neck cancer from April 2005 to February 2006. We compared the outcomes of donor site of RFFF which were resurfaced with split thickness skin graft (STSG) only and STSG overlying an $AlloDerm^{(R)}$. Patients were all males ranging from 59 to 74 years old (mean, 67.5). Three of them had tongue cancers, and the other showed hypopharyngeal cancer. All cases were pathologically confirmed as squamous cell carcinomas. We included the deep fascia into the flap, so called subfascially elevated RFFF in three cases, and in the other one, we dissected the RFFF suprafascially leaving the fascia intact. The donor site of the suprafascially elevated RFFF was resurfaced with STSG only. Among three of subfascially elevated RFFFs, donor-sites were covered with thin STSG only in one case, and STSG overlying $AlloDerm^{(R)}$ in two cases. All RFFFs were survived completely without any complication. The donor site of the suprafascially elevated RFFF was taken well with STSG only. But, the partial graft loss exposing brachioradialis and flexor carpi radialis muscle was unavoidable in all the subfascially elevated RFFFs irregardless of $AlloDerm^{(R)}$ application. Considering that many patients of the head and neck cancer are in old ages, we believe the RFFF is still a useful and versatile choice for resurfacing the head and neck region after cancer ablation. Its reliability and functional characteristics could override its criticism for donor site in old-aged cancer patients.

• 한국공간구조학회논문집
• /
• 제4권2호
• /
• pp.63-71
• /
• 2004

트러스형 공간 구조물은 무주의 대공간을 덮을 수 있는 장점과 구조적 성질이 동일한 등가 연속체 쉘 로 치환하여도 비교적 정확한 해를 얻을 수 있다는 장점으로 인해 21세기 첨단 구조물의 한 장인 초대형 구조물 분야에 많이 활용되고 있으며, 효율적인 부재의 이용과 대량생산의 가능성으로 인해 많은 발전을 해 왔다. 그러나 이러한 쉘 형태의 공간 구조물은 구조 거동의 특성상 주로 구조안정문제가 구조설계에서 해결해야하는 핵심적인 기술력이 되며, 이를 어떻게 해결하여야 할 것인가의 문제는 아직도 많은 연구자들에게 난제로 남아 있다. 즉, 연속체 쉘 구조의 원리에서 긴 경간을 얇게 만들면, 뜀좌굴과 분기좌굴같은 불안정 거동이 나타나게 되며, 이러한 쉘형 구조 시스템에서 구조 불안정 문제의 특징은 초기 조건에 매우 민감하게 반응한다는 것이고, 이런 문제들은 수학적으로 비선형 문제에 귀착하게 된다. 따라서, 본 논문에서는 공간 프레임형 구조물의 불안정 현상을 살펴보기 위하여, 다양한 파라메타중 초기불완전량과 rise-span 비가 트러스 구조물의 불안정 현상에 미치는 영향을 알아보고자 하며, 이를 위해 1-자유절점 공간구조물, 2-자유절점 공간구조물, 다-자유절점 공간구조물을 예제로 채택하여 불안정 거동을 살펴보고자 한다.

• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.29-35
• /
• 2003

SnAg, SnAgCu, SnCu 무연솔더합금을 주조 상태에서 냉간압연한 후 열적으로 안정화한 시편 (TS)과, 실제 솔더 범프와 유사한 미세구조의 수냉에 급속 냉각(WQ)된 시편 두가지를 $100^{\circ}C$에서 크리프 실험을 행하였다. 급속냉각한 시편의 냉각속도는 140-150 K/sec로 primary $\beta-Sn$ 크기가 TS 시편보다 5∼10배 정도 작았으며, 기지내 primary $\beta-Sn$이 차지하는 분율은 증가하였다. 반면에 공정상 내의 $Ag_3Sn$상의 크기는 더 작아졌다. 크리프 실험 결과 WQ 시편의 최소크리프 변형율 속도($\{beta}_{min}$)가 TS 보다 약 $10^2$배 정도 작았으며. 더 큰 파괴시간을 보였다. TS-SnAg의 크리프파괴는 $Ag_3Sn$ 또는 $Cu_6Sn_5$에서의 공공의 핵생성, power-law 크리프에 의한 공공의 성장, 그리고 크리프 공공의 상호 연결로 일어났으며, WQ-SnAgCu는 시편이 두께가 얇아 네킹에 의해 파괴가 일어났다.

• 대한화학회지
• /
• 제47권2호
• /
• pp.147-154
• /
• 2003

본 연구에서는 PTC 소자의 NTC 현상을 제거하기 위하여 카본블랙을 0.1-0.4 MPa의 압력으로 불소처리 한 후 이를 이용하여 카본블랙/HDPE 전도성 컴파운드를 제조하였다. 불소처리한 카본블랙의 표면특성 변화는 FT-IR, XPS 그리고 접촉각 측정을 통하여 확인하였다. FT-IR실험 결과, 불소처리된 카본블랙은 1400-1000 cm$^{-1}$ 영역에서 C-F 피크를 나타내며 처리압력이 증가할수록 C-F 피크의 세기가 증가함을 확인할 수 있었다. 또한, XPS 분석을 통해 불소처리 압력이 증가할수록 카본블랙 내의 불소의 함량이 증가함을 확인하였다. 그러나, 불소처리된 카본블랙의 표면자유에너지는 처리압력이 증가할수록 감소하였다. 결과로서, 카본블랙의 불소 처리를 통해 카본블랙/HDPE 컴파운드의 NTC 현상이 사라졌는데, 이는 카본블랙의 표면자유에너지 감소가 수지의 융점 이후 일어나는 카본블랙 입자간의 재결합을 방해하기 때문이라 사료된다.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.47-61
• /
• 1998

수평곡선 I형교에서는 곡선주형의 초기곡률로 인하여 휨과 비틀림이 서로 연성 되어 복잡한 거동을 하며. 교량전체 거동에 가로보가 미치는 영향이 상당히 크다. 수평곡선 I형교의 거동특성을 파악하기 위해서는 곡선주형과 함께 가로보를 고려하여야 한다. 본 연구에서는 수평곡선 I형교에 대한 자유진동해석을 위하여 곡선주형을 유한요소 모델링하기 위한 곡선보요소와 가로보를 모델링하기위한 직선보요소를 구성하고, 이들 보요소를 사용한 유한요소 해석 프로그램을 개발한다. 곡선보 요소는 초기곡률과 됨을 고려하기 위하여 박판곡선보 이론에 근거하여 2축 대칭단면을 갖는 I형 곡선보에 대한 유한요소 정식화를 통하여 구성되며, 이때 형상함수는 박판곡선보의 선형 정적 평형방정식의 제차해를 사용한다. 직선보 요소는 됨자유도를 포함하여 절점당 7자유도를 갖는다. 개발한 프로그램에서는 직교좌표계를 사용하여 전체 강성행렬과 전체 질량행렬을 구성하며, 고유치를 구하기 위하여 Gupta의 방법을 사용한다. 기존의 연구결과를 이용하여 구성된 곡선보 요소를 비교검증하고, 수치해석 예제를 통하여 개발한 프로그램의 결과와 쉘요소를 사용하여 범용유한요소해석프로그램으로 수행한 결과를 비교한다.