• 한국임상수의학회지
• /
• 제36권4호
• /
• pp.233-237
• /
• 2019

A 10-year-old castrated male Shih Tzu dog was submitted to a local animal hospital with a mass from gingiva to maxillofacial skeleton. Computed tomography revealed that strong invasion of the mass result in osteolysis in orbit and frontal bone. The excised mass was presented to the Pathology Department of the Veterinary Medicine, Jeju National University. Surgically excised mass was rubbery to firm in consistency. Histologically, the neoplastic mass was composed of irregular or interdigitating cords, islands or pseudo-glandular structures of stratified epithelial cells. These cords or islands showed typical palisading pattern of neoplastic epithelial cells to periphery without intercellular bridge (desmosome) and surrounded by eosinophilic immature collagenous matrix. Some area showed islands of well differentiated keratinizing squamous cell foci. Some lumen of glandular structures contained fibrin-like materials and RBC. These neoplastic cells showed marked invasive tendency to adjacent connective tissues and bony tissues, therefore solitary neoplastic cells were widely distributed throughout the surround connective tissue. The neoplastic cells showed positive reactions for pan-CK and CK14, weakly positive reaction for CK5/6. And the surrounding immature collagenous matrix was only labeled for vimentin.

• 한국공간구조학회논문집
• /
• 제23권1호
• /
• pp.25-34
• /
• 2023

This paper presents a computational fluid dynamics (CFD) analysis to investiagate the effect of expansion chamber on overpressure reduction in protective tunnels subjected to detonation of high explosives. A commercial CFD code, Viper::Blast, was used to model the blast waves in a protective tunnel with a length of 160 m, width of 8.9 m and height of 7.2 m. Blast scenarios and simulation matrix were establihsed in consideration of the design parameters of expansion chamber, including the chamber lengths of 6.1 m to 12.1 m, widths of 10.7 m to 97 m, length to width ratios of 0.0 to 5.0, heights of 8.0 m and 14.9 m, and ratios of chamber to tunnel width of 1.2 to 10.9 m. A charge weight of TNT of 1000 kg was used. The mesh sizes of the numerical model of the protective tunnel were determined based on a mesh convergence study. A parametric study based on the simulation matrix was performed using the proposed CFD tunnel model and the optimized shape of expansion chamber of the considered tunnel was then proposed based on the numerical results. Design recommendations for the use of expansion chamber in protective tunnel under blast loads to reduce the internal overpressures were finally provided.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.109-110
• /
• 2022

Recently, it tend to increase the high-rise and large-scale of buildings and the developtment of construction technology can to be applied reinforced concrete structures to high-rise buildings. However, when a high-rise buildings is constructed with reinforced concrete, it has a disadvantage that buildings weight increases. In order to resolve the weight of reinforced concrete structures, various types of lightweight aggregates become development and research. Although lightweight aggregates can be reduced the weight of concrete, the strength of ITZ(Interfacial Transition Zone) is lowered due to its less strength than natural aggregates. In this study, an experimental study was conducted to coat the surface of lightweight aggregates with GGBFS(ground granulated blast furnace slag) to improve the strength of cement matrix mixed with lightweight aggregates. Result of this experimental study shows that the compressive strnegth of the surface coating lightweight aggregates was higher than general lightweight aggregates. Also, it was considered that this is because the pore at the ITZ of the surface-coated lightweight aggregates mixed cement matrix are filled with GGBFS fine particle.

• 대한토목학회논문집
• /
• 제13권2호
• /
• pp.95-109
• /
• 1993

본(本) 연구(研究)에서는 Mode분할기법(分割技法)을 이용(利用)하여 아치구조물(構造物)의 형상최적화(形狀最適化)를 시도(試圖)하였다. 본(本) 연구(研究)에서는 아치리브를 유한개(有限個)의 직선부재(直線部材)로 구성(構成)되어 있는 것으로 하고 상관방정식(相關方程式)과 허용응력(許容應力) 및 좌굴제약(挫屈制約)까지 포함(包含)하여 2골절(滑節)아치와 양단고정(兩端固定)아치의 형상(形狀)을 최적화(最適化)할 수 있도록 최적화(最適化) 문제(問題)를 형성(形成)하였다. 본(本) 연구(研究)의 제(第) 1단계(段階)(level 1)에서는 다른 연구(研究)와 달리 근사화(近似化)한 아치구조물(構造物)의 강성도행렬(剛性度行列)(stiffness matrix)과 기하강성도행렬(幾何剛性度行列)(geometric stiffness matrix)관계(關係)로부터 Ray leigh-Ritz법(法)으로 좌굴하중(挫屈荷重)을 구(求)하고, 설계공간법(設計空間法)에 의한 감도해석(感度解析)으로 부재력(部材力)을 근사화(近似化)함으로써 구조해석수(構造解析數)를 줄일 수 있었다. 목적함수(目的凾數)는 구조물(構造物)의 중량(重量)이 최소(最小)가 되도록 중량함수(重量凾數)로 택(擇)하였다. 제약조건식(制約條件式)으로는 허용응력(許容應力), 좌굴응력(挫屈應力) 및 설계변수( 設計變數) 상(上) 하한치제약(下限値制約)을 부과(附課)하여 최적화문제(最適化問題)를 형성(形成)하였다. 제(第) 2단계(段階)(level 2)에서는 설계변수(設計變數) 및 조정변수(調整變數)를 절점좌표(節點座標)로 하고 목적함수(目的凾數)로는 중량함수(重量凾數)로 하여 최적화(最適化) 문제(問題)를 형성(形成)하였다. 절점좌표(節點座標)만을 설계변수(設計變數)로 함으로써 무제약최적화문제(無制約最適化問題)로 형성(形成)되므로 최적화(最適化) 과정(過程)이 용이(容易)하다. 본(本) 연구(研究)의 알고리즘을 아치구조물(構造物)에 적용(適用)한 결과(結果) 본(本) 연구(研究)는 아치구조물(構造物)의 형태(形態), 제약조건식(制約條件式)에 구애(拘碍)받지 않고 최적해(最適解)에 효율적(效率的)으로 수렴(收斂)하였고 아치구조물(構造物)의 최적형상(最適形狀)은 제약조건식(制約條件式)에 따라 상이(相異)하였으며 중량(重量)은 제약조건식(制約條件式) 및 아치의 형상(形狀)에 따라 다소(多少)의 차이(差異)는 있으나 형상최적화(形狀最適化)로 17.7%-91.7%까지 감소(減少)시킬 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.136-143
• /
• 1995

The problem of the structural identification becomes important, particularly with relation to the rapid increase of the number of the damaged or deteriorated structures, such as highway bridges, buildings, and industrial facilities. This paper summarizes the recent studies related to those problems by the present authors. The system identfication methods are generally classified as the time domain and the frequency domain methods. As time doamin methods, the sequential algorithms such as the extended Kalman filter and the sequential prediction error method are studied. Several techniques for improving the convergences are incorporated. As frequency domain methods, a new frequency response function estimator is introduced. For damage estimation of existing structures, the modal perturbation and the sensitivity matrix methods are studied. From the example analysis, it has been found that the combined utilization of the measurement data for the static response and the dynamic (modal) properties are very effictive for the damage estimation.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.418-424
• /
• 2003

Exfoliated poly(methyl methacrylate-co-styrene) [P(MMA-co-ST)]/silicate nanocomposites were synthesized through a multistep emulsion polymerization. The methyl methacrylate monomers were polymerized first and then the styrene monomers were polymerized. The nanocomposites had core-shell structures consisting of PMMA (core) and PS (shell); these structures were confirmed by $^1$H NMR spectroscopy and TEM, respectively. P(MMA-co-ST) copolymers showed two molecular weight profiles and two glass transition temperatures (T$_{g}$) in GPC and DMA measurements. At 30 $^{\circ}C$, the nanocomposites exhibited 83 and 91 % increases in their storage moduli relative to the neat copolymer because the silicate layers were dispersed uniformly in the polymer matrix.x.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.8.2-8.2
• /
• 2011

This talk demonstrates diverse patterned structures utilizing in-situ self-organization and phase separation of the materials into an ordered fashion. The patterned structures in this talk include electrospun nanofibers and electrosprayed microparticles embedding small particles. The positions of the small particles are in-situ controlled during the electrohydrodynamic process by the interaction with the polymer matrix. Another topic of the talk includes selective deposition of spin-coated materials on a corrugated surface that was prepared by buckling of polymer thin films. Solution are strong tendency to be positioned in the trench area of the surface, which facilitates the fabrication of micropatterns of diverse materials.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.631-641
• /
• 1988

본 연구에서는 선형 탄성 해석의 결과를 이용하여 초기 하중 증분량을 결정하 는 방법을 제안한다. 또 Crisfield의 방법에서 부분적으로 발생하는 수치적 불안정 을 개선하고 수치 해석의 효율을 제고시키기 위하여 하중 증감의 판정 방법과 변위 증 분 길이의 예측 방법을 제안한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.95-102
• /
• 2003

To define an analytical model for a structural system or to assess damage in the system, system identification(SI) methods have been developed and widely applied. The paper presents a method of determining optimal sensor location(OSL) based on the maximum likelihood approach, which is applicable to modal SI methods. To estimate unknown parameters reliably, it is necessary that the information provided by the experiment should be maximized. By applying the Cramer-Rao inequality, a Fisher information matrix in terms of the probability density function of measurements is obtained from a lower bound of the estimation error. The paper also proposes a scheme of determining of OSL on damaged structures by using maximum strain energy factor. Simulation studies have carried out to investigate the proposed OSL algorithm for both undamaged and damaged structures.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.814-819
• /
• 2004

In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.