• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.506-512
• /
• 2003

An output multiplexer of manifold type is widely used in a recent satellite transponder f3r its mass and volume reduction. For correct operation, the filter of such a multiplexer must be singly terminated. In this paper, a simple synthesis method of a 6-pole dual-mode singly terminated filter is described. From the transfer function of the filter, network parameters such as in/output terminations and coupling matrix are obtained with the aid of orthogonal projection and plane rotation. The rotation order, pivot, and rotation angle of the plane rotation process are given for easy filter synthesis. Two different-structure filters are taken into consideration and the network parameters of each filter have been obtained from the same transfer function. The method described in this paper can be applied to the other degree singly terminated filter.

• Journal of Environmental Health Sciences
• /
• v.43 no.4
• /
• pp.307-313
• /
• 2017

Objectives: Chemicals derived from various environment media contaminates food across the food supply chain. In Korea, levels of contaminants in food have been sporadically measured by monitoring programs of different government agencies. There is difficulty with data compilation and integrated analysis across media. Therefore, the aim of this study was to propose an overall integrated database and analytical platform design for the 'ECO-FOOD NET (Environmental COntaminant reduction platform for FOOD through an interagency collaboration NETwork)', a tool to support the reduction of environmental contaminants in food. Methods: We developed a new data structure and standardized protocols for the compilation of integrated data. In addition, we conducted subject-oriented logical and physical relational database modeling and created the architecture design of the platform. Results: We established a standardized code system related to exposure media and route, analysis method and food matrix. In addition, we designed the seven software modules of 'About the System', 'Introduction to Interagency Work', 'Media-Chemicals Profiles', 'Method Bank', 'Monitoring Data Base', 'Integrated Media Analysis', and 'Risk-Benefit Analysis'. Conclusions: This study will contribute to decision-making as a tool for executing risk management, such as sustainable reduction policies of contaminants in food.

• Journal of Digital Convergence
• /
• v.13 no.4
• /
• pp.311-317
• /
• 2015

It is important to analyze and offer specialized start-ups effect factors for collegians in order to systematically and successfully support technology-centered start-ups of collegians, whose social experience is insufficient. However, consistently changing start ups environmental analysis is difficult, which can be a problem, because technology-centered start-ups factor analysis is carried out depending on statistical package. This paper proposes an ATSA system that demonstrates effect factors on technology-centered start-ups decision making as a hierarchial structure by using AHP, inputs the effect factors to judgment matrix after pre-processing, calculates standardized values and weights, verifies consistency, and draws priorities through weights integration. It was confirmed that the ATSA system can efficiently support decision making for technology-centered start-ups by quantitatively analyzing qualitative factors through experiments by applying multi-criteria decision making to the analyses of start-ups founders' internal and external factors and various start-ups environments.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.86-92
• /
• 2007

A discrete dynamic model for tracking feature points in 2D images is developed. Conventional snake approaches deform a contour to lock onto features of interest within an image by finding a minimum of its energy functional, composed of internal and external forces. The neighborhood around center snaxel is a space matrix, typically rectangular. The structure of the model proposed in this paper is a set of connected vertices. Energy model is designed for its local minima to comprise the set of alternative solutions available to active process. Block on tracking is one dimension, line type. Initial starting points are defined to the satisfaction of indent states, which is then automatically modified by an energy minimizing process. The track is influenced by curvature constraints, ascent/descent or upper/lower points. The advantages and effectiveness of this layer approach may also be applied to feature points tracking of digital image whose pixels have one directional properties with high autocorrelation between adjacent data lines, vertically or horizontally. The test image is the ultrasonic carotid artery image of human body, and we have verified its effect on intima/adventitia starting points tracking.

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.1-10
• /
• 1985

This study was carried to analyze the structural change of interrelationships between the forestry including forest product processing and the other industrial sectors. The interindustry tables (19 setors) were drawn with the aid of the interindustry table published in 1970, 1975 and 1980 in connection with the forestry and forest product processing. In addition, the input coefficient and inverse matrix coefficient were calculated in the light of the 19 sector of interindustry tables. Owing to the change of economic structure during the period of 1970-1980, the importance of forest in Gross National Product has been decreasing. But it has shown that forestry is a kind of original industry having a great deal of intermediate demand which is constantly increasing. Therefore, forestry could be regarded as a supply industry to other industries. In addition, the import coefficient of forestry products in larger than that of other industries and it keeps increasing.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.1
• /
• pp.31-39
• /
• 1999

In the present study, oxidation behavior of 304 and 316 stainless steels was investigated. After solution treatment, specimens were polished up to $1{\mu}m$ $Al_2O_3$ grade and then subjected to oxidation treatment in dry air. The range of temperature was used for oxidation treatment at $300^{\circ}C{\sim}500^{\circ}C$ and TEM was used for analyzing the components and structure of oxide film. Also, these results were compared with the results of ESCA and TG. According to the results of TEM analysis, it was found that Cr oxide film was formed on top of the surface after room temperature oxidation but amorphous Fe oxide was formed on top of the surface and polycrystalline $(Cr,Fe)_2O_3$ was formed below the amorphous Fe oxide layer after $500^{\circ}C$ oxidation treatment. The oxidized specimens at $500^{\circ}C$ showed that 316 stainless steel resists more strongly to grain and grain boundary oxidation than 304 stainless steel. These results suggested that Mo component resolved in 316 stainless steel matrix suppressed the formation of Cr carbide which may results in local Cr deplete area.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.71-75
• /
• 1998

Liquid crystalline compounds with amine terminal group and related linear and cross-linked liquid crystal polymers with epoxy resin structure were synthesized and characterized to develope matrix materials for polymer dispersed liquid display applications. Both linear and crosslinked side chain type liquid crystal polymers made with aromatic amine mesogens and ethylene glycol diglycidyl ether exhibited nematic texture as shown by polarized optical microscope(POM) and their transition temperatures were determined both by DSC and POM. Liquid crystal polymer samples also showed even-odd effect as the spacer length of aromatic amine mesogens were varied, however, the effect was samller than that of low molecular weight mesogens. Changes of nematic-to-isotropic transition($T_{NI}$) of crosslinked type polymer liquid crystals were also disscussed in relation to the concentration change of crosslinking agent 1,10-diaminodecane.

• Archives of Plastic Surgery
• /
• v.34 no.6
• /
• pp.685-690
• /
• 2007

Purpose: Numerous materials, both autologous and nonautologous, have been used for augmentation of sunken areas and each has its own limitations. The ideal material for augmentation should not be absorbed in any manner. This study is designed to assess the survival of $SureDerm^{(R)}$, $Permacol^{(R)}$ graft according to the volume and histologic change. Methods: Twenty four mice, weighing about 50 grams and of 5 weeks of age were used. $SureDerm^{(R)}$ is an acellular dermal matix obtained from human cadeveric skin. $Permacol^{(R)}$ is a porcine derived acellular dermal matrix whose manufacture involves trypsinisation, solvent extraction. Graft pieces standardized to $1{\times}1cm$ size were used in each group. The implanted material were taken 1, 4, 8 and 12 weeks later, respectively. The changes of graft volume during the graft period were measured on initial, 1, 4, 8 and 12 weeks. Results: The initial shape of graft was maintained up to 12 weeks in $Permacol^{(R)}$ graft group and mean survival rate was $80.36{\pm}8.21%$ in $SureDerm^{(R)}$, $89.57{\pm}6.39%$ in $Permacol^{(R)}$(p=0.01). The volume of each graft decreased 29% from initial volume on 12 weeks in $SureDerm^{(R)}$, 18% in $Permacol^{(R)}$. The structure of $Permacol^{(R)}$ remained until 12 week after implantation. Conclusion: Our experimental study suggests that $Permacol^{(R)}$ could be a safe material as an implant for permanent augmentation. However, There are further study remained for antigenicity of these material, and the choice of graft for augmentation should be remained to the clinical situations.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.85-93
• /
• 2016

Flower-like zinc oxide (FZnO) was successfully synthesized via a sonochemical process. The chemical structure, morphology, and antimicrobial properties of as- prepared FZnO were investigated. Additionally, pure LDPE and five different LDPE/FZnO composite films were prepared with different FZnO content by using a twin screw extruder. According to the FTIR and SEM analyses, there exists weak interfacial interaction between LDPE and FZnO. Compared with pure LDPE, the LDPE/FZnO composite films showed UV barrier and enhanced antimicrobial activity against Escherichia coli (E. coli) as a Gram-negative micro-organism and Staphylococcus aureus (S. aureus) as a Gram-positive micro-organism. To enhance the interfacial interaction and good dispersion of FZnO into the LDPE matrix, and resultantly to such as UV barrier and antimicrobial properties of LDPE/FZnO composite films as the packaging materials, further efforts are required.

• Journal of Korean Society on Water Environment
• /
• v.29 no.4
• /
• pp.504-513
• /
• 2013

Water quality trends for major tributaries (66 sites) in the Yeongsan River basin of Korea were examined for 12 parameters based on water quality data collected every month over a period of 12 months. The complex data matrix was treated with multivariate analysis such as PCA, FA and CA. PCA/FA identified four factors, which are responsible for the structure explaining 78.2% of the total variance. The first factor accounting 27.3% of the total variance was correlated with BOD, TN, TP, and TOC, and weighting values were allowed to these parameters for grade classification. CA rendered a dendrogram, where monitoring sites were grouped into 5 clusters. Cluster 2 corresponds to high pollution from domestic wastewater, wastewater treatment and run-off from livestock farms. For grade classification of tributaries, scores to 10 indexes were calculated considering the weighting values to 3 parameters as BOD, TN and TP which were categorized as the first factor after FA. The highest-polluted group included 10 tributaries such as Gwangjucheon, Jangsucheon, Daejeoncheon, Gamjungcheon, Yeongsancheon. The results indicate that grade classification method suggested in this study is useful in reliable classification of tributaries in the study area.