• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.556-562
• /
• 1999

The increasing price of surimi has affected the economical benefits of surimi based food industry, To maintain gel strength in low grade surimi, the optimum formulation adding functional proteins to low grade surimi is required. The objective of this study was to develop the optimum formulation of ingredients in making gels in low grade surimi on the addition of functional non-muscle proteins to low grade surmi by measuring rheological properties of the gels. The rheological qualities of the cooked gels made with A and RA grade surimi on the effects of adding five kinds of starches (potato, wheat, waxy maize, corn and modified corn) and four kinds of functional proteins (bovine plasma protein, dehydrated egg white, soy protein isolate and whey protein concentrate) to the gels were evaluated, The gel styengths at cooking with A and RA grade surimi were decreased with increasing the added starches. The kind of starches added affected little the gel strengths in Rh grade surimi, while potato and corn starches decreased at the least in gel strengths of the gel made with A grade surimi with increasing the concentration of starches. The bovine plasma protein (BPP) significantly increased the gel strength, especially in RA grade surimi, but BPP decreased the whiteness of the gel. Therefore, the optimum content of BPP was up to $2\%$ because of the whiteness of the gels in RA grade surimi, The optimum formulation for the gel with RA grade surimi to satisfy the gel strength of 1000$\times$g and $78\%$ moisture was $40.9\%$ surimi, $9.1\%$ dehydrated egg white (DEW) and $0.9\%$ starch, while that with A grade surimi under the same condition was $37.9\%$ surimi, $6.6\%$ DEW and $3,4\%$ starch.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.48-59
• /
• 2021

In this study, experiments were conducted to investigate the compressive·flexural performances of single fiber-reinforced mortar (FRM) using only steel fiber or carbon fiber which has different material properties as well as hybrid FRM using a mixture of steel and carbon fibers. The mortar specimens incorporated steel and carbon fibers in the mix proportions of 1+0%, 0.75+0.25%, 0.5+0.5%, 0.25+0.75% and 0+1% by volume at a total volume fraction of 1.0%. Their mechanical performance was compared and examined with a plain mortar without fiber at 28 days of age. The experiments of mortar showed that the hybrid FRM using a mixture of 0.75% steel fibers + 0.25% carbon fibers had the highest compressive and flexural strength, confirming by thus the synergistic reinforcing effect of the hybrid FRM. On the contrast, in the case of hybrid FRM using a mixture of 0.5% steel fibers + 0.5% carbon fibers witnessed the highest flexural toughness, suggesting as a result the optimal fiber mixing ratio of hybrid FRM to improve the strength and flexural toughness at the same time. Moreover, the fracture surface was observed through a scanning electron microscope (SEM) for image analysis of the FRM specimen. These results were of great help for images analysis of hybrid reinforcing fibers in cement matrix.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.152-160
• /
• 2021

Converter steel slag(BOF slag) is a vast amount of solid waste generated in the steelmaking process which has very low utilization rate in Korea. Due to the presence of free CaO which can derive bad volume stability in BOF slag, it usually land filled. For recycling BOF and identify its applicability as fine aggregate, this study investigates the fundamental characteristics of mortar with cement replaced ferronickel slag(FNS), which has the potential to be used as a binder. The results suggest that the mineral phases of BOF slag mainly include larnite(CaSiO₄), mayenite(Ca₁₂Al₁₄O₃₃) and wuestite(FeO) while olivine crystallines are shown in FNS. The results of flow and setting time reveals that the flowability and process of hardening increased when the amount of FNS and BOF slag incorporated was increased. The length change shows that the amount of change in the length of the mortar was almost constant regardless of mix proportion while compressive strength was reduced. Micro structure test results revealed that FNS or/and BOF slag mix took a long time to react in the cement matrix to form a complete hydration products. To achieve the efficient utilization of B OF slag as construction materials, proper replacement rate is necessary.

• Journal of the Society of Disaster Information
• /
• v.15 no.2
• /
• pp.239-248
• /
• 2019

Purpose: This study aims to enhance the resistance against sulfate attack compared to ordinary Portland cement (OPC) concrete by using liquid crystal display (LCD) as binder. Method: The fundamental properties including compressive strength and porosity of concrete replaced by LCD up to 15% at increments of 5% and in turn, the weight, volume, and strength loss of LCD-mixed concrete was analyzed. Results: For the concrete substituted by 5% of LCD, it showed the highest compressive strength at 28 days of curing, and particular at immersion of $Na_2SO_4$ solution, it was achieved the lowest loss of weight, volume and strength due to an decreased porosity at capillaries. In contrast, there is no distinct difference of the sulfate attack resistance between LCD-mixed concretes under exposure of $MgSO_4$ solution, excepted for OPC concrete. Conclusion: In this study, comparison of resistance to sulfate attack between LCD-mixed concretes, and it would be proposed the possibility of LCD usage as binder through long-term verification with extended replacement ratio and identification of changes of hydrates in the cement matrix.

• Journal of Life Science
• /
• v.29 no.3
• /
• pp.382-393
• /
• 2019

Wound care is a health industry concern affecting millions worldwide. Recent increase in metabolic disorders such as diabetes comes with elevated risk of wound-based complications. Treatment and management of wounds are difficult practices due to complexity of the wound healing process. Conventional wound dressings and treatment applications only provide limited benefits which are mainly aimed to keep wound protected from external factors. To improve wound care, recent developments make biopolymers to be of high interest and importance to researchers and medical practitioners. Biopolymers are polymers or natural origin produced by living organisms. They are credited to be highly biocompatible and biodegradable. Currently, studies reported biopolymers to exhibit various health beneficial properties such as antimicrobial, anti-inflammatory, hemostatic, cell proliferative and angiogenic activities which are crucial for effective wound management. Several biopolymers, namely chitosan, cellulose, collagen, hyaluronic acid and alginic acid have been already investigated and applied as wound dressing agents. Different derivatives of biopolymers have also been developed by cross-linking with other molecules, grafting with other polymers, and loading with bioactive agents or drugs which showed promising results towards wound healing without any undesired outcome such as scarring and physiological abnormalities. In this review, current applications of common biopolymers in wound treatment industry are highlighted to be a guide for further applications and studies.

• International Area Studies Review
• /
• v.17 no.4
• /
• pp.109-130
• /
• 2013

This study aims to identify the priority for the Gwangyang and Qingdao hinterlands which are in the same category of benchmarking crowed paths. This study has been mainly done with comparison. There is certain limitation to use competitive factors of existing research so, this study has had proper competitive factors deriving from factors analysis and studied hinterland priority of competing factors by AHP. Major results are as follows. First, the factor analysis resulted in 20 factor that were 0.6 or higher loading level of commonality and then these 20 factors were divided into groups: operating factors, service factors, cost factors, port infrastructure factors, and hinterland conditions factors with the rotated component matrix analysis. Second, according to the result of top competitive factors, the best factor was the hinterland condition(0.256). The other factors such as infrastructure, economy, accessibility, incentive, and port traffic in hinterland were highly ranked in terms of general importance using multiple weights. Third, the result of detailed properties importance about the final alternative, Gwangyang hinterland was considered more highly than Qingdao hinterland in the port information system, the support a variety of administrative services, the efficiency of the customs, and the tax benefits.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.51-59
• /
• 2019

There is increasingly more research focusing on the application of FRP reinforcing bars as an alternative material for steel reinforcing bars, but most such research look at short term behavior of FRP reinforced structures. In this study, the microscopic analysis and tensile behavior of Basalt and Glass FRP bars under freezing-thawing and alkaline conditions were experimentally evaluated. After 100 cycles of the freezing and thawing, the tensile strength and elastic modulus of FRP bars decreased by about 5%. In the case of microstructure of FRP bars during the initial 20 days, no significant damages of FRP bar sections were found under $20^{\circ}C$ alkaline solution; however, the specimens immersed in $60^{\circ}C$ alkaline solution were found to experience resin dissolution, fiber damage and the separation of the resin-fiber interface. In the alkaline environment, the strength decrease of about 10% occurred in the environment at $20^{\circ}C$ for 100 days, but the tensile strength of FRPs exposed for 500 days decreased by 50%. At temperature of $40^{\circ}C$ and $60^{\circ}C$, an abrupt decrease in the strength was observed at 50 and 100 days. Especially, the tensile strength decrease of Basalt fiber Reinforced Polymer bars showed more severe degradation due to the damage caused by dissolution of resin matrix and fiber swelling in alkaline solution. Therefore, in order to improve the long-term performance of the surface braided FRPr reinforcing bars, surface treatment is required to ensure alkali resistance.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.3
• /
• pp.87-103
• /
• 2019

Nonaqueous organic electrolyte solution in commercially available lithium-ion batteries, due to its flammability, corrosiveness, high volatility, and thermal instability, is demanding to be substituted by safer solid electrolyte with higher cycle stability, which will be utilized effectively in large-scale power sources such as electric vehicles and energy storage system. Of various types of solid electrolytes, composite solid electrolytes with polymer matrix and active inorganic fillers are now most promising in achieving higher ionic conductivity and excellent interface contact. In this review, some kinds and brief history of solid electrolyte are at first introduced and consequent explanations of polymer solid electrolytes and inorganic solid electrolytes (including active and inactive fillers) are comprehensively carried out. Composite solid electrolytes including these polymer and inorganic materials are also described with their electrochemical properties in terms of filler shapes, such as particle (0D), fiber (1D), plane (2D), and solid body (3D). In particular, in all-solid-state lithium batteries using lithium metal anode, the interface characteristics are discussed in terms of cathode-electrolyte interface, anode-electrolyte interface, and interparticle interface. Finally, current requisites and future perspectives for the composite solid electrolytes are suggested by help of some decent reviews recently reported.

• Journal of Korean Medicine for Obesity Research
• /
• v.18 no.2
• /
• pp.106-114
• /
• 2018

Objectives: We investigated about the microbial properties and changes in the efficacy of the Codonopsis lanceolata (CL) by natural fermentation. Methods: CL was fermented for four weeks in a well-ventilated place with 2.5% salt. pH, total sugar, total polyphenol, and total flavonoid were measured to determine fermentation characteristics according to fermentation period and salt treatment. Polymerase chain reaction denaturing gradient gel electrophoresis and random amplification of polymorphic DNA-polymerase chain reaction were carried out for microbial analysis during fermentation. In addition, HepG2 cell was cultured to check the lipid accumulation through oil red O staining and the glucose uptake was analyzed by measuring the 2-NBDG at C2C12 cell. Results: The pH level and the total sugar decreased with the CL fermentation. Total polyphenol and flavonoid increased after CL fermentation. It was confirmed that Leuconostoc mesenteroides were maintained continuously during fermentation. In the salt treatment CL, there was a sharp increase in Rahnella aquatilis. Lactobacillus plantarum matrix was observed in fermented CL. In addition, Lactococcus lactis, Weissella koreensis, R. aquatilis, L. plantarum, Leu. mesenteroides have been added to the salt treatment. Glucose uptake were significantly increased after fermentation with salt for four weeks. Lipid accumulation in the HepG2 cells was observed that there was difference (P<0.01) between free fatty acid group (100%) and decreased 4 weeks after fermentation (90.38%) at $800{\mu}g/mL$. Conclusions: Total polyphenol and flavonoid were increased after CL fermentation. Especially, percentage of the glucose uptake and lipid accumulation inhibition increased in CL fermentation with salt. It is expected that fermentation of salt treated CL will be more effective in diabetes and fatty liver.

• Membrane Journal
• /
• v.28 no.6
• /
• pp.379-387
• /
• 2018

This study was conducted to improve the membrane characteristics and performance by increasing hydrophilicity by adding additives to the ultrafiltration polysulfone (PSf) hollow fiber membrane. The mixed matrix membranes (MMMs) were prepared by dispersing 15 nm of fumed silica (FS) in the spinning solution at 0.1, 0.3 and 0.5 wt%. SEM analysis was carried out to confirm the cross-section and surface condition. It was confirmed that mean pore radius of the hollow fiber increased by 4 nm as FS was added. In addition, contact angle measurement was carried out for the hydrophilicity analysis of hollow fiber membranes, and it was confirmed that the hydrophilicity of MMMs were increased by adding of FS. In the case of water permeability, the membrane including FS showed 91~96 LMH and showed 5~11% more increase than PSf membrane. In the antifouling performance test, relative flux reduction ratios of FS mixed hollow fiber membranes were lower than that of PSf membranes, and it was confirmed that increase of hydrophilicity hinders adsorption of hydrophobic BSA on the membrane surface.