• Journal of Pharmaceutical Investigation
• /
• 제39권1호
• /
• pp.19-21
• /
• 2009

This study was performed to examine the possibility of increasing the level of furosemide permeation from the ethylene-vinyl acetate (EVA) matrix through the skin by incorporating various enhancers in the EVA matrix. The effects of the enhancers on the level of furosemide permeation through the skin were evaluated using Franz diffusion cells with intact excised rat skins. The enhancers examined were the fatty acids (saturated, unsaturated), the pyrrolidones, the propylene glycol derivatives, the glycerides and the non-ionic surfactants. Among the enhancers used, polyoxyethylene-2-oleyl ether (a non-ionic surfactant) showed the best enhancement. The polyoxyethylene 2-oleyl ether as a permeation enhancer could be used for development of furosemide-EVA transdermal matrix system.

• Investigative Magnetic Resonance Imaging
• /
• 제11권2호
• /
• pp.110-118
• /
• 2007

목적: 확산텐서자기공명영상(DT-MRI: Diffusion Tensor Image)을 이용하여 확산의 주축을 구성하는 세 성분에 대한 고유치 (eigefvalue)의 영상을 구현해 보고자 하였다. 대상 및 방법: 고유치 영상을 구현하기 위해서 3.0 테슬러 MRI(Magnetic Resonance Imaging)를 이용하여 확산텐서영상을 얻었으며, Moore-Penrose pseudo-inverse 방법과 SVD(single value decomposition) 방법을 이용하여 확산 주축을 계산하였다. 이 과정을 픽셀단위로 반복적으로 계산하여 새로운 확산 주축 영상들을 만들었으며, 이 확산 주축 영상들과 분할 비등방성 영상의 관계를 조사하였다. 결과: 확산텐서영상 기법으로 얻어진 확산텐서영상을 이용하여, 세 방향의 확산 주축에 대한 고유치 영상을 구성하였으며, 고유치 영상들과 분할 비등방성 영상을 함께 분석함으로써, 뇌의 해부학적 구조물에 따른 분할 비등방성 값의 차이를 확인할 수 있었다. 또한, 확산 주축에 대한 고유치의 변화에 대한 컴퓨터 모의실험에서, 변화하는 고유치에 따른 분할 비등방성 값의 변동 추이를 알아볼 수 있었다. 그리고 확산 주축의 크기가 비등방성을 좌우하는 것이 아니라, 세 확산 주축의 조합으로 비등방성의 정도를 표현한다는 것을 확인할 수 있었다. 확산 주축 방향의 고유치들을 분리하여 영상화 함으로써, 뇌의 병변에 의한 비등방성의 변화의 원인이 확산 주축의 어떠한 변화에 의해 발생하는 것인지 확인할 수 있을 것으로 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제27권5호
• /
• pp.203-209
• /
• 2006

The aim of this study is to investigate the feasibility of ex vivo MR diffusion tensor imaging technique in order to observe the diffusion-contrast characteristics of human gastric tissues. On normal and pathologic gastric tissues, which have been fixed in a polycarbonate plastic tube filled with 10% formalin solution, laboratory made 3D diffusion tensor Turbo FLASH pulse sequence was used to obtain high resolution MR images with voxel size of $0.5{\times}0.5{\times}0.5mm^3\;using\;64{\times}32{\times}32mm^3$ field of view in conjunction with an acquisition matrix of $128{\times}64{\times}64$. Diffusion weighted- gradient pulses were employed with b values of 0 and $600s/mm^2$ in 6 orientations. The sequence was implemented on a clinical 3.0-T MRI scanner(Siemens, Erlangen, Germany) with a home-made quadrature-typed birdcage Tx/Rx rf coil for small specimen. Diffusion tensor values in each pixel were calculated using linear algebra and singular value decomposition(SVD) algorithm. Apparent diffusion coefficient(ADC) and fractional anisotropy(FA) map were also obtained from diffusion tensor data to compare pixel intensities between normal and abnormal gastric tissues. The processing software was developed by authors using Visual C++(Microsoft, WA, U.S.A.) and mathematical/statistical library of GNUwin32(Free Software Foundation). This study shows that 3D diffusion tensor Turbo FLASH sequence is useful to resolve fine micro-structures of gastric tissue and both ADC and FA values in normal gastric tissue are higher than those in abnormal tissue. Authors expect that this study also represents another possibility of gastric carcinoma detection by visualizing diffusion characteristics of proton spins in the gastric tissues.

• Journal of Pharmaceutical Investigation
• /
• 제17권3호
• /
• pp.111-126
• /
• 1987

Methyl methacrylate-butyl methacrylate copolymer (MMBM)-dibutyl phthalate (DBP) films were investigated as a potential topical drug delivery system for the controlled release of nitrofurazone. The kinetic analysis of release data indicated that drug release followed a diffusion-controlled granular matrix model, where the quantity released per unit area is proportional to the square root of time. DBP of several hydrophobic plasticizers selected was found to give the highest release of nitrofurazone. However, hydrophilic plasticizers such as propylene glycol and polyethylene glycol 400 had no controlled release properties and acceptable film formation. The effects of changes in film composition, drug concentration, film thickness, pH of release medium, and temperature on the in vitro release of nitrofurazone were analyzed both theoretically and experimentally. The release rate constant (k') was found to be proportional to DBP content, pH, and the temperature of release medium, but independent of film thickness, and drug concentration in a range of 0.1-0.4% by weight. The linear relationship was found to exist between the log k' and DBP content. The release of nitrofurazone from MMBM-DBP (8:2) films was found to be an energy-linked process. Two energy terms were calculated ; the activation energy for matrix diffusion was 13.45 kcal/mole, and the heat of drug crystal solvation was 27.26-29.34 kcal/mole. Observation of scanning electron micrographs and microscopic photographs showed that the incorporation of DBP in films increased markedly the particle size of nitrofurazone dispersed in the film matrix, comparing with the fine dispersion of nitrofurazone in pure MMBM film alone.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1102-1107
• /
• 1999

FeAl 기지 복합재료는 hot-pressing에 의해서 성공적으로 제조할 수 있다. 이러한 FeAl 합금의 기계적 특성에 대한 연구는 많이 진행되었으나 플라즈마 질화에 의한 표면 경화특성에 관한 연구는 아직 미흡한 실정이다. 본 연구에서는 hot-pressing으로 제조된 소결 복합재료의 미세구조와 플라즈마 질화처리시 표면경화의 관계를 분석하였다. FeAl을 기지로 하는 합금은 플라즈마 질화처리에 의해서 표면경도가 상승하는 경향을 보였고, 이러한 경향은 질화처리 시간이 증가할수록 더욱 뚜렷하였다($\textrm{H}_{\textrm{v}}$ 100gf, 확산층 : 1100~1450kg/$\textrm{mm}^2$, matrix : 330~360kg/$\textrm{mm}^2$). FeAl 합금으로 플라즈마 질화처리에 의해서 매우 우수한 표면경화특성을 얻을 수 있었다. 확산층은 플라즈마 질화처리시간이 증가할수록 두꺼워졌으며, SiC(sub)p의 함유량이 증가함에 따라 확산층은 감소하였다.

• Journal of Pharmaceutical Investigation
• /
• 제40권3호
• /
• pp.167-173
• /
• 2010

Repeated oral administration of hydrochlorothiazide, a loop diuretic, due to transient high blood levels, may cause adverse effects such as gastric disturbance, nausea, high blood sugar, and hyper lipidemia. Transdermal administration could avoid some of these systemic side effects and gastric disorders. We have developed a matrix using ethylene-vinyl acetate (EVA), a heat-processible and flexible material, for transdermal delivery of hydrochlorothiazide. Drug solubility was highest at 40% PEG-400 volume fraction. Drug release increased as concentration increased with a linear relationship between the release rate and the square root of loading dose. Increasing temperature increased drug release from the EVA matrix. The activation energy, measured from the slope of log P versus 1000/T, was 11.9 kcal/mol for a 2.5% loading dose from EVA matrix. Diethyl phthalate had the highest plasticizing effects on the release of hydrochlorothiazide. To increase the skin permeation of hydrochlorothiazide from the EVA matrix, enhancers such as the saturated fatty acids, the unsaturated fatty acids, and the non-ionic surfactants were added to the EVA matrix, and skin permeation was evaluated using a modified Keshary-Chien diffusion cell fitted with intact excised rat skin. Polyoxyethylene 23-lauryl ether showed the highest enhancing effects. In conclusion, transdermal delivery of hydrochlorothiazide could be improved from an EVA matrix containing plasticizer and permeation enhancer.

• 한국패류학회지
• /
• 제3권1호
• /
• pp.3-14
• /
• 1987

The electrophoretic and innunological cnalyses of organic matrices in the shells of freshwater bivalves were made in order to dlucidate the biochemical characteristics and species-specific differinces of the applied shells, The water-soluble and insoluble matrices of four species of freshwater bivalves, Andodonta fukudai, Unio douglasiae, Lanceolaria and Chrbicula fluminea, were used as analytical materials, There was non-identity in immuno affinity between anti soluble matrix(anti-Sm) and anti insoluble matrix(anti-ISM)sera against the organic matrix of Andodnta fukudai. The SMs of four species (S. fukudai, U.douglasiae, L. acrorhyncha, and C. fluminea) showed the differences in the precipitate arcs at the level of family, though ISMs did mot show differences. In the electrophoretic analysis, all foru species had two SDS-electrophoretic bands of SM, of which molecular wights appeared to be lower than 55,000, shereas the native organic matrices of foru speceis had higher molecular weighrs than those from SDS-dldctrophoresis. Only calcium ion among many ions in extrapallial fluid(EPF) caused SM to change into insoluble molecules, thus the EPF pretreated with Ca++did not form the precipitate arc when did the immuno diffusion whth anti SM serum. ISM precursor may be polymerized into macromolecules like periostracin, a precusor of periostracum, judging from the similat polymerization patterns in 0.1M Tris formate buffer(pH 3); they may be made insoluble macromolecules due to their strong natrue of hydrophobicity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.496-499
• /
• 2000

In order to investigate the effect of Ge addition to the Cu Matrix on the microstructure and the critical current density, four kinds of internal tin processed Nb$_3$Sn strands with pure Cu and Cu 0.2, 0.4, 0.6 wt％ Ge alloy were drawn to 0.8 mm diameter. The microstructure and critical current of internal tin processed Nb$_3$Sn wires that were heat treated at temperatures ranging from 68$0^{\circ}C$ to 74$0^{\circ}C$ for 240 h were investigated. The Ge addition to the matrix did not make workability worse. A Ge rich layer in the Cu-Ge matrix suppressed the growth of the Nb$_3$Sn layer and promoted grain coarsening. The greater the Ge content in the matrix, the lower the net Jc result after Nb$_3$Sn reaction heat treatment. There was no significant variation in Jc observed with heat treatment temperature ranging from 68$0^{\circ}C$ to 74$0^{\circ}C$.

• 대한금속재료학회지
• /
• 제46권12호
• /
• pp.817-822
• /
• 2008

Metal matrix composite (MMC) materials having low electrical contact resistance based on 316L stainless steel (STS) matrix alloy with $ZrB_2$ particles were fabricated for PEMFC (Polymer Electrolyte Membrane Fuel Cell) separator by powder metallurgy (PM). The effects of the boride particle addition into the matrix alloy on microstructure, surface morphology, and interfacial contact resistance (ICR) between the samples and gas diffusion layer (GDL) were investigated. Both conventional and PM 316L STS samples showed high ICR due to the existence of non-conductive passive film on the alloy surface. The addition of the boride particles, however, remarkably reduced ICR of the samples. SEM observation revealed that the boride particles were protruded out of the matrix surface and particle density existing on the surface increased with increasing the boride content, causing increase of the total contact area between the conductive particles and GDL. ICR of the samples also decreased with increasing the boride content resulted from the increased contact area.

• 한국환경보건학회지
• /
• 제19권2호
• /
• pp.46-54
• /
• 1993

This study was carried out on the stabilized/solidified treatment for the reducing leachability of hazardous heavy metals copper, lead, chromium and cadmium in the hazardous sludge which treated to be unleached heavy metals by sodium diethyl dithiocarbamate. Cement matrix was analyzed for the leachability of 24 hrs and dynamic leaching test, structure and the optimum condition for the stabilization and solidification of the hazardous sludge. In 28 days of curing time the unconfined compressive strength was 21.5 kg/cm$^2$ at the ratio of portland cement (0.5)+fly ash (0.25) and 23.5 kg/cmz at the ratio of portland cement (0.5)+fly ash (0.25) + cake (0.25). High concentration of Pb, Cr and Cd in the sea water and Cu in the distilled water were leached at the dynamic leaching test. The concentration of leaching heavy metals for specimens which were tested 24 hrs were found low leachability with decreasing pH of leachant. According to dynamic leaching test, the low level of copper, lead, cadmium and chromium were leached in the cement matrix with sodium diethyl dithiocarbamate. But the effective diffusion coefficient of unleached cement matrix which was treated sodium diethyl dithiocarbamate was decreased above 2 times than that of cement matrix. The relation of leachant renewal period (Y) and cumulative fraction ion leached (X) was the following regression equations. Solidification with unleached agent. Y$_{Cu}$ = 1413752X + 247, Y$_{Pb}$ = 223501IX + 214, Y$_{Cr}$ = 8310601X - 472, Y$_{Cd}$ = 168787X + 1061 The structure of' solidified matrix with X-ray diffraction analysis was composed more Ca(OH)$_2$, Si, Mg(OH)$_2$ and Al in the unleached cement matrix than those in cement matrix.