• 융합정보논문지
• /
• 제12권3호
• /
• pp.85-107
• /
• 2022

본 연구는 수상 운송업이 전체 산업들과의 관계 속에서 경제 전반에 미치는 유발 효과 및 네트워크 연결성과 네트워크 시각화 분석을 시행하는 것이다. 이를 위하여 산업연관분석과 단위구조행렬을 활용하여 수상 운송업의 각종 유발계수를 분석하며, 단위구조행렬과 역행렬함수를 작성하고 Ucinet 6을 이용하여 네트워크 연결성과 NetDraw를 활용하는 네트워크 시각화 분석을 시행한다. 연구결과 수상 운송업의 각종 유발계수로서 투입계수, 생산유발계수, 부가가치유발계수, 산업간 연쇄효과의 분석 결과를 제시 하였으며, 네트워크 연결성으로서 연결중앙성, 인접중앙성, 사이중앙성 및 네트워크 시각화 분석의 내용을 제시하였다. 본 연구를 통하여 수상 운송업의 현재 위치와 현황 및 전체 산업들과의 관계를 확인하였으며 어떠한 산업들과 전략적 관계를 가져야 하는가를 제시하였다. 향후에는 2000년대 이후 발간된 산업연관분석을 활용하여 각종 유발 효과 및 연결성(중앙성), 네트워크 시각화 분석의 변동 현황과 추이에 대한 사항을 추가로 분석하는 것이 필요하다.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.677-682
• /
• 2018

관계분석형 R&D 포트폴리오 방법은 중점기술의 선정기준이 독립적일 경우 각 선정기준의 고유한 목적과 특성을 반영하여 중점기술을 선정하는 방법이다. 본 연구는 중점기술을 도출하기 위한 방법으로 관계분석형 R&D 포트폴리오 방법을 제시하고 선정기준과 분석지표간의 상관관계 분석하는 1단계, 각 선정기준에 최적으로 부합하는 포트폴리오 매트릭스를 구성하는 2단계, 중점기술을 도출하는 3단계로 나누어 방법론을 적용하는 과정을 서술하였다. 본 연구에서는 중점기술을 선정하기 위한 4대 선정기준과 기술수준, 경제성, 기술성을 파악하기 위한 분석지표간의 상관관계를 HoQ를 응용한 표로 작성하였다. 상관관계표를 바탕으로 각 선정기준을 최적으로 만족하기 위해 고려해야 할 분석지표를 도출하였으며, 도출된 분석지표와 선정기술을 두 축으로 포트폴리오 매트릭스를 구성하였다. 4대 기준을 모두 충족하는 충족형 포트폴리오 P0와 4대 선정기준의 고유한 특성을 반영하여 각 선정기준을 효과적으로 충족하는 포트폴리오 P1~P4를 구성하여 중점기술을 도출하였다. 선정된 중점기술은 명세기반의 키워드 분석 등의 과정을 거쳐 미래 안보환경에 대응하기 위한 중점분야 선정에 활용될 수 있다.

• 융합보안논문지
• /
• 제14권7호
• /
• pp.45-51
• /
• 2014

IoT시스템 품질확보를 목표로 하는 QoS 관리체계에서 가장 중요한 포인트는 품질 측정체계 설계와 품질평가 제도이다. 본 연구는 IoT시스템 구조와 기능 진단을 토대로 한 핵심품질 측정용 매트릭스 모델 연구이다. 특히 사물인터넷(IoT) 환경의 품질측정에 대한 메트릭스를 개발함으로써 사물 인터넷(IoT) 품질 측정/분석을 위한 기초를 제공한다. IoT시스템 품질평가용 매트릭스는 기능적 요구사항과 품질 요구사항을 하나의 통합 테이블에 기술하여 품질평가를 시행하는 방법이다. 기능적 요구사항과 품질 요구사항을 종합하여 연관성을 평가함으로써 평가 신뢰도와 활용성을 높일 수 있다. 제안된 방법 적용 시 IoT 품질은 신호처리, 프로세싱, 네트워킹 기능 등에서 보다 효율적인 품질확보의 토대가 되고 전체적으로 지연을 줄이면서 QoS를 향상 시킬 수 있다.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.124-132
• /
• 1996

선박 거주구 설계를 예로하여 선박설계에 있어서 업무 부하가 평준화된 최적의 설계일정계획을 도출할 수 있는 일정계획시스템을 수립하여 보았다. 설계일정관리에 영향을 주는 여러 요소들을 찾아 분석하여 최적의 설계일정을 도출할 수 있는 알고리즘을 설계하였다. 계획된 선박의 각 도면작성에 소요되는 시수를 신속하게 추정하기 위하여, 표준선박에 대한 기본 시수를 미리 설정하여 놓고 해당 선박에 대한 난이도를 적절히 적용하는 방법을 사용했다. 여러 도면작업의 진행상의 선후관계를 matrix table로 표현하여 일정표 작성의 전산화를 단순화 하였다. 이 시스템을 전산화 함으로써 계획된 선박에 대하여 그 선박의 특성이 충분히 반영 되어 작업이 평준화된 설계일정계획을 짧은 시간에 얻을 수 있었다.

• The Korean Journal of Ecology
• /
• 제9권3호
• /
• pp.135-147
• /
• 1986

The simplification and the searching trends of complex data which assumed relationship between predictor variables and object variables are one of primary objective of ecological research. This study was aimed to apply cononical analysis consisting of canonical correlation analysis and canonical variate analysis related to lichen vegetation and several environmental variables which are elevation, height on grond, exposure side and cover values. Data collected from the Duckyoo National Park in August 1985. Lichen species was ranked by eqivocation information theory with cover values. Canonical correlation analysis was applied to one data set both set both environmental variables and lichem family. In order to make two sets of data matrix the scale of position vector ordination was calculated from the vector scalar product for lichen species. Canonical variate analysis was applied to rearranged data which was made by interval class code for environmental variables. The sharpness values was calculated in frequency of cotingency tables and the dispersion profiles of each species in classes of environmental variables was designed to extract component values based on the decomposition of expected frequencies in contingency table. The results of canonical correlation analysis revealed canonical first correlation value 0.815(89%), and second correlation value 0.083(11%). Significance test showed that the hypothesis of joint mutuallity of canonical correlation is accepted (P>0.05). The relation between canonical score of vegetation variables and that of environmental variable indicated linear tendency.

• 한국컴퓨터정보학회논문지
• /
• 제24권9호
• /
• pp.135-142
• /
• 2019

Given the ability and skills required by modern people, marketing can be divided into knowledge-related skill such as marketing plans, market segmentation, and marketing mix management and supportive skill such as communication, inter-organizational management, creativity, and decision making. Knowledge related skills can be nurtured in existing marketing classes, but it is recognized that special educational programs such as self marketing are needed to develop and train supportive skills regardless of education levels or major education. This paper is aimed to design for marketing educational program for the self marketing. In this study, a DACUM method job analysis to extract contents by specialists such as model setting of task and job, job statement, job analysis, education course development, and so on. In the first place, this report presents job analysis model by procedures for developing selection criteria of examination questions of the self marketing qualification. The first step is preparation for job analysis, the second step: the establishment of job models, the third step : the job specification and task analysis, the fourth step: the review of job model, the fifth step: the establishment of subjects for examination matrix table for making questions.

• 한국환경보건학회지
• /
• 제42권6호
• /
• pp.430-437
• /
• 2016

Objectives: The new Chemical Control Act from the Korean Ministry of Environment (2014-259) simply states only in basic phrases that every worker handling the listed chemicals should wear personal protective equipment (PPE) and does not consider the different hazard characteristics of particular chemicals or work types. The purpose of this study was to produce an exposure risk matrix and assign PPE to the categories of this matrix, which would be useful for revising the act to suggest PPE to suit work types or situations. Methods: An exposure risk matrix was made using hazard ranks of chemicals and workplace exposure risks in the previous study. For the 20 categories of exposure risk matrix PPE, levels A, B, C, D as classified by OSHA/EPA were assigned. After 69 hazardous chemicals were divided into 11 groups according to their physiochemical characteristics, respirators, chemical protective clothing (CPC), gloves and footwear were suggested on the basis of the assigned PPE levels. Results: PPE table sheets for the 11 groups were made on the basis of work types or situations. Full facepiece or half-mask for level C was recommended in accordance with the exposure risk matrix. Level A was, in particular, recommended for loading or unloading work. Level A PPE should be worn in an emergency involving hydrogen fluoride because of the number of recent related accidents in Korea. Conclusion: PPE assignment according to the exposure risk matrix made by chemical hazards and work type or situation was suggested for the first time. Each type of PPE was recommended for the grouped chemicals. The research will be usefully used for the revision of the Chemical Control Act in Korea.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.88-101
• /
• 1998

In this paper, module of a product is determined by the characteristics of a product itself and art assembly process. To analyze the characteristics o( the product, assembly function, structure of subassembly and parts could be considered. Based on the analysis of characteristics of product structure, assembly process and product function, determination criteria of a module could be proposed. For the assembly process, assembly methods, assembly equipment and workers could be considered. For the product structure, constituent object and structural feature could also be considered. To obtain the interrelationship between the product and the assembly process, the matrix table could be used to find the influencing factors that affected the module.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.785-795
• /
• 2019

This paper is a study on the modeling of the quantity estimation model for offshore plant Material handling equipment in FEED(Front End Engineering Design) verification stage using system engineering approach which is an engineering design methods. The relevant engineering execution procedure is not systemized although the operation method and Material handling equipment selection with weight and space constraints is a key part of the FEED. Using the system engineering process, the stakeholder requirements analysis process, the system requirements analysis, and the final system architecture design were sequentially performed, and the process developed through the functional development diagram and Requirement traceability matrix (RTM) was verified. In addition, based on the established process, we propose a Material handling quantity estimation model and Quantity calculation verification Table that can be applied at the FEED verification stage and we verify the applicability through case studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권8호
• /
• pp.3946-3965
• /
• 2018

Network anomaly detection in Software Defined Networking, especially the detection of DDoS attack, has been given great attention in recent years. It is convenient to build the Traffic Matrix from a global view in SDN. However, the monitoring and management of high-volume feature-rich traffic in large networks brings significant challenges. In this paper, we propose a moving window Principal Components Analysis based anomaly detection and mitigation approach to map data onto a low-dimensional subspace and keep monitoring the network state in real-time. Once the anomaly is detected, the controller will install the defense flow table rules onto the corresponding data plane switches to mitigate the attack. Furthermore, we evaluate our approach with experiments. The Receiver Operating Characteristic curves show that our approach performs well in both detection probability and false alarm probability compared with the entropy-based approach. In addition, the mitigation effect is impressive that our approach can prevent most of the attacking traffic. At last, we evaluate the overhead of the system, including the detection delay and utilization of CPU, which is not excessive. Our anomaly detection approach is lightweight and effective.