• 대한전기학회논문지:전력기술부문A
• /
• 제51권4호
• /
• pp.163-168
• /
• 2002

This paper present a new verb efficient numerical algorithm for arcing faults detection and fault distance estimation in transmission line. It is based on the fundamental differential equations describing the transients on a transmission line before, during and alter the fault occurrence, and on the application of the "Least Error Squares Technique"for the unknown model parameter estimation. If the arc voltage estimated is a near zero, the fault is without arc, in other words the fault is permanent fault. If the arc voltage estimated has any high value, the faust is identified as an fault, or the transient fault. In permanent faults case, fault distance estimation is necessary. This paper uses the model of the arcing fault in transmission line using ZnO arrestor and resistance to be implemented within EMTP. One purpose of this study is to build a structure for modeling of arcing fault detection and fault distance estimation algorithm using Matlab programming. In this paper, This algorithm has been designed in Graphic user interface(GUI).

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.169-175
• /
• 2009

Real-time multibody vehicle dynamics software has been developed for virtual handling tests. The software can be utilized for HILS(Hardware In the Loop Simulations) and consists of three modules such as a graphical vehicle modeling preprocessor, a real time dynamics solver, and a virtual reality graphic postprocessor for virtual handling tests. In the graphical vehicle modeling preprocessor, vehicle hard point data for a suspension model are automatically converted into multibody vehicle model. In the real time dynamics solver, the efficient subsystem synthesis method is used to create multibody equations of motion for a subsystem by a subsystem. In the virtual reality graphic postprocessor, an animator has been also developed by using Matlab Virtual Reality Toolbox for virtual handling tests.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.41-46
• /
• 2008

The primary objective of this study is to truly understand exciting forces of the in-line 4 cylinders engine. Exciting forces of the engine apply a source of the vehicle NVH(Noise, Vibration, Harshness). To understand exciting forces, first was governed theoretical equations for single cylinder engine. And this theoretical equations was programming using MATLAB software. To compare theoretical analysis value, was applied MSC.ADAMS software. To determined the specification of engine(2,000cc, in-line 4) was applied ADAMS/Engine module. And this specification for engine was applied ADAMS/View and MATLAB software. The geometry model for ADAMS/View analysis was produced by the 3-D design modeling software. After imported 3-D model, each rigid body was jointed suitable. Under idle speed for engine, was analysed. The results of analysis are fairly well agreed with those of three analysis method. Using MATLAB software proposed in this study, engine exciting fores can be predicted. Also using ADAMS/Engine module and ADAMS/View software, engine exciting forces can be predicted.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.70-81
• /
• 2011

In this paper, a multi-agent control system for DC-coupled photovoltaic (PV), fuel cell (FC), ultracapacitor(UC) and battery hybrid power system is studied for commercial buildings & apartment buildings microgrid. In this proposed system, the PV system provides electric energy to the electrolyzer to produce hydrogen for future use and transfer to the load side, if possible. Whenever the PV system cannot completely meet load demands, the FC system provides power to meet the remaining load. A multi-agent system based-power management and control algorithm is proposed for the hybrid power system by taking into account the characteristics of each power source. The main works of this paper are hybridization of alternate energy sources with FC systems using long and short storage strategies to build the multi-agent control system with pragmatic design, and a dynamic model proposed for a PV/FC/UC/battery bank hybrid power generation system. A dynamic simulation model for the hybrid power system has been developed using Matlab/Simulink, SimPowerSystems and Stateflow. Simulation results are also presented to demonstrate the effectiveness of the proposed multi-agent control and management system for building microgrid.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.210-216
• /
• 2009

마이크로그리드는 전력시스템의 계획 및 실시간 운영에 있어서 매우 큰 영향을 미치며 중요한 역할을 할 것으로 판단된다. 따라서 본 연구에서는 빌딩의 마이크로그이드의 중요한 마이크로소오스인 마이크로터빈 발전시스템의 Matlab/Simulink 모델과 전압-주파수제어기를 개발하였다. 또한 부하에 독립적으로 전원을 공급하기 위한 전력시스템을 구성, 모의를 통하여 MTG시스템의 특성을 분석하였다.

• International Journal of Aerospace System Engineering
• /
• 제4권1호
• /
• pp.13-21
• /
• 2017

In this paper, we present some results on performance analysis for flap actuation system of aircraft. For this, by utilizing MATLAB/Simulink solution, which is widely used physical model-based design tool, we particularly construct the architecture of the analysis model consisting of the main three phases: 1)commanding and outer-controlling the flap angle through flight control computer; 2)generating hydraulic/mechanical power through control module and power drive unit; 3)transmitting torque and actuating the flap through torque tube and rotary geared actuators. For mimicking the motion of the actual flap, we apply each mechanical component, which is already being used in actual aircraft, to our performance analysis model so that it guarantees the congruency of the simulation results. That is, we reflect the actual specifications of flap hardware and software as parameters of the model. Finally, simulation results are presented to illustrate the model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.181-182
• /
• 2009

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.1-9
• /
• 2015

디젤 자동차의 점점 강화되는 $NO_X$ 배기가스 규제를 만족하기 위해서는 화학공학 기반의 SCR 반응모델을 사용한 모델기반 제어 알고리즘 개발이 필요하다. 본 연구에서는 소형 경유차량을 대상으로 $NO_X$ 를 저감하기 위한 배기 후처리 시스템 모델을 설계하기 위하여 SCR 시스템 모델링과 Rig 실험 및 Matlab 을 이용하여 시뮬레이션 및 검증을 하였다. SCR Rig 실험은 디젤엔진에서 배출되는 배기가스와 같은 성분의 모사가스를 생성하여 공간속도와 온도의 변화에 의한 SCR 의 $NO_X$ 저감효율에 대한 실험 조건 및 데이터를 획득하였다. 또한, 제안된 모델은 Rig 실험에서 사용한 실험조건과 결과데이터를 이용하여 Matlab 을 통해 검증하였으며 시뮬레이션 시 필요한 모델의 파라미터 값들은 실험데이터를 기반으로 최적화하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.297-301
• /
• 2009

The impact of adding additional Multi-Criteria Decision Analysis (MCDA) criteria is demonstrated because current research shows MCDA for flood damage has been applied using only a few criteria but for better results the MCDA approach needs to apply more criteria for evaluating the alternatives. By adding additional criteria into MCDA, the capability to make the best alternatives more diverse and show the decision maker more differences in the scores of the alternatives to allow the decision maker to discriminate is significantly improved. The target region for a demonstration application of the methodology was the Suyoung River Basin in Korea. The 1991 Gladys flood event and five different return periods were used as a case study to demonstrate the proposed methodology of evaluation of various flood damage reduction alternatives.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 봄 학술발표논문집 Vol.29 No.1 (A)
• /
• pp.628-630
• /
• 2002

본 논문은 이상 유동장 시스템의 전기 단층촬영 기법의 성능을 향상시키기 위해 Matlab과 같은 계산 도구에 데이터 통신 기능을 추가적으로 구현하여 노드들의 협력 계산을 지원한다. 구현된 통신 기능은 Matlab 명령어 라인이나 m-file에서 직접 호출할 수 있는 동적 링크 라이브러리 형태로 제공되며 호출시 전달된 Matlab 고유 방식으로 표현된 행렬을 Windows 운영체제에서 제공하는 파이프 기능을 이용하여 네트워크를 통해 수신자에게 전달한다. O(n$^3$)의 복잡도를 갖는 다수의 연산으로 구성된 영상 복원 알고리즘에 있어서 사전 분석과정을 협력 계산함으로써 물체 내부의 상황에 따라 n의 크기를 감소시켜 알고리즘의 수행속도를 크게 개선할 수 있다. 본 논문에서 구현된 협력 계산 환경과 프로그램은 주어진 물체내부 기포 분포에 대해 동적 칼만 필터 프로그램을 8개의 노드를 사용하였을 때 15배까지 수행속도를 향상시켰다. 따라서 고가의 병렬 시스템 대신 현재 이용이 가능한 저비용의 클러스터 계산 환경을 ET 기법에 적용하여 보다 정확하고 신속한 영상 복원을 수행할 수 있다.