• Journal of Korea Technology Innovation Society
• /
• v.10 no.4
• /
• pp.789-807
• /
• 2007

Technology Readiness Levels were initially proposed by NASA in 1995. TRL's definition and range were modified within adopted feilds such as hardware and software products. Many national R&D programs have similar evaluation conditions. However, they are influenced by the experts' ability. Relatively, they have shown the little reliance and the low performance of the developed prototype and technology. The purpose of this study is to apply the TRL to the materials and components development program. We defined TRLs for the program and devided them in three technology fields. Proposals, which were submitted for the program in 2007, were assessed with our TRL definitions for the study on the applicability. As a result, we could understand the characteristic TRLs of the technical proposals to the materials and components development program. This shows that the objective tools such as TRLs are required as the R&D program management factors. For the sake, it is the important factor that the detail directives to assess TRL should be developed according to the branches of industrial technology fields.

• Communications of Mathematical Education
• /
• v.27 no.4
• /
• pp.523-545
• /
• 2013

The purposes of the study were to analyze STEAM instructional materials to find research trends on STEAM instructional program and to develop mathematics-centered STEAM instructional program for middle school second graders. To conduct this study, the researcher collected total 123 research papers and thesis focused on the development of STEAM instructional material and deduced implications for the development of mathematics-centered STEAM instrucational materials from the findings. The researcher found that important components of such as 'context for learning', 'internalization-mmersion', 'new challenge', and 'self-assessment' in STEAM education were not reflected properly in 19 mathematics-centered STEAM instructional programs. Therefore, the researcher put more emphasis on those components in the process of developing mathematics-centered STEAM program.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.2
• /
• pp.45-51
• /
• 2003

The multi-piloting type progressive die for U-bending sheet metal production part is a very specific division. This study reveals the sheet metal forming process with multi-forming die by center carrier type feeding system. Through the FEM simulation by DEFORM, it was accepted to u-bending process as the first performance to design of strip process layout. The next process of die development was studied according to sequence of die development, i.e die structure, machining condition for die making, die materials, heat treatment of partially die components, know-how and so on. The feature of this study is the die development of scrapless progressive die of multi-stage through the modeling on the I-DEAS program, components drawing on the Auto-LISP, CAD/CAM application, ordinary machine tool operating and revision by tryout.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.347-352
• /
• 2002

The Cut off-type progressive die for U-bending production part is a very specific division. This study reveals the sheet metal forming process with multi-forming die by Center Carrier type feeding system. Through the FEM simulation by DEFORM, it was accepted to u-bending process as the first performance to design of strip process layout. The next process of die development was studied according to sequence of die development, i.e. die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. The feature of this study is the die development of scrapless progressive die of multi-stage through the Modeling on the I-DEAS program, components drawing on the Auto-Lisp, CAD/CAM application, ordinary machine tool operating and revision by tryout.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.6
• /
• pp.61-70
• /
• 2003

A multibody system dynamics analysis program is presented using one of the most useful programming methodologies, the object-oriented modeling, The object-oriented modeling defines a problem from the physical world as an abstract object. The object becomes encapsulated with the data and method, Analysis is performed using the object's interface, It is then possible for the user and the developer to modify and upgrade the program without having particular knowledge of the analysis program, The method presented in this paper has several advantages, Since the mechanical components of the multi-body system are converted into the class, the modification, exchange, distribution and reuse of classes are increased. It becomes easier to employ a new analysis method and interface with other S/W and H/W systems, Information can be communicated to each object through messaging. This makes the modeling of new classes easier using the inheritance, When developing a S/W for the computer simulation of a physical system, it is reasonable to use object-oriented modeling.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.47-53
• /
• 2005

The non-linear finite element program of the large deformation analysis by computer simulation has been used in the prediction and evaluation of the behaviors of the non-linear rubber components. The analysis of rubber components requires the tools modelling the special materials that are quite different from those used for the metallic parts. The nonlinear simulation analysis used in this study is expected to be widely applied in the design analysis and the development of several rubber components which are used In the manufacturing process of many industries. By utilizing this method, the time and cost can also be saved in developing the new rubber product. The objective of this study is to analyze the rubber component with the large deformation and non-linear properties.

• Journal of Adhesion and Interface
• /
• v.8 no.1
• /
• pp.1-7
• /
• 2007

The objectives of this study are to analyze emitted components and concentrations of VOCs (Volatile Organic Compounds) from the inside of vehicles that were experimented with sedans and RVs (Recreational Vehicles) delivered from warehouses after 15, 30, 45 and 60 days. The value of TVOC (Total Volatile Organic Compounds) was twice to eight times over than the standard value. However, TVOC of vehicles was more detected than RVs. Especially, the value of toluene was rapidly decreased after 45 days. But after 60 days, it was more detected than the standard value. After 45 days, the xylene value was confirmed to be lower than the standard value. As a result, it was found that development of alternative technologies such as non-solvent and systems for automobile interior parts may be imminent. Using test method standard, although it is not yet International Standard, to analyze and replace components, concentrations, human-noxious, it will contribute to producing environmental-friendly vehicles.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2407-2417
• /
• 2021

A structural integrity evaluation program (STEP) was developed for the high temperature reactor design evaluation according to the ASME Boiler and Pressure Vessel Code (ASME B&PV), Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors, Subsection HB. The program computerized HBB-3200 (the design by analysis procedures for primary stress intensities in high temperature services) and Appendix T (HBB-T) (the evaluation procedures for strain, creep and fatigue in high temperature services). For evaluation, the material properties and isochronous curves presented in Section II, Part D and HBB-T were computerized for the candidate materials for high temperature reactors. The program computerized the evaluation procedures and the constants for the weldment. The program can generate stress/temperature time histories of various loads and superimpose them for creep damage evaluation. The program increases the efficiency of high temperature reactor design and eliminates human errors due to hand calculations. Comparisons that verified the evaluation results that used the STEP and the direct calculations that used the Excel confirmed that the STEP can perform complex evaluations in an efficient and reliable way. In particular, fatigue and creep damage assessment results are provided to validate the operating conditions with multiple types of cycles.

• Journal of Korean Academy of Nursing
• /
• v.52 no.5
• /
• pp.535-549
• /
• 2022

Purpose: The study aimed to design and develop an automated personalized self-care (APSC) program for patients with type 2 diabetes mellitus. The secondary aim was to present a clinical protocol as a mixed-method research to test the program effects. Methods: The APSC program was developed in the order of analysis, design, implementation, and evaluation according to the software development life cycle, and was guided by the self-regulatory theory. The content validity, heuristics, and usability of the program were verified by experts and patients with type 2 diabetes mellitus. Results: The APSC program was developed based on goal setting, education, monitoring, and feedback components corresponding to the phases of forethought, performance/volitional control, and self-reflection of self-regulatory theory. Using the mobile application, the participants are able to learn from educational materials, monitor their health behaviors, receive weekly-automated personalized goals and feedback messages, and use an automated conversation system to solve the problems related to self-care. The ongoing two-year study utilizes a mixed method design, with 180 patients having type 2 diabetes mellitus randomized to receive either the intervention or usual care. The participants will be reviewed for self-care self-efficacy, health behaviors, and health outcomes at 6, 12, 18, and 24 months. Participants in the intervention group will be interviewed about their experiences. Conclusion: The APSC program can serve as an effective tool for facilitating diabetes health behaviors by improving patients' self-care self-efficacy and self-regulation for self-care. However, the clinical effectiveness of this program requires further investigation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.133-143
• /
• 1996

The need of comfortable car and the efforts to overcoming the noise regulations on passenger cars bring about a series of studies on the ruduction of exhaust noises. In this study, acoustic characteristics of various components that compose mufflers of automobiles were analyzed theoretically, and the program which predicts the performance of mufflers was developed by the transfer matrix approach. The simulations were verified by the experiments on a real muffler. By using the developed simulation program, we investigate the effects of each component on the entire muffler system and the energy loss coefficient on absorption materials in the front muffler. Finally, we proposed two designs to improve the performance of a muffler and verified the improved performance by the experiments and simulations.