• 산업기술연구
• /
• 제31권A호
• /
• pp.53-57
• /
• 2011

Recently due to dramatically increasing demand of liquid crystal display (LCD) panel in IT industry, the used LCD panel glass has been wasted from electronic items, and also panel glass of poor quality during manufacturing process. The wasted LCD panel glass was crushed in the range of 0.42 to 2mm and evaluated for its usefulness as a aggregate in production of cement concrete brick. Cement concrete specimens with various mixing ratios of weathered granite soil, LCD panel glass and cement were cured in wetness for 7 days at $40^{\circ}C$ and then tested for uniaxial comprehensive strength (UCS)(KS F 4004 method). Specimen with a mixing ratio, 1:6:3, of weathered granite, LCD panel glass and cement, respectively, showed the highest average in the UCS test($26.51N/mm^2$). It is much higher than that of commercial brick without glass($17.00N/mm^2$). Conclusively waste LCD panel glass can be reutilized economically as a raw building material of good quality.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.637-640
• /
• 2006

Corrosion from various causes of reinforcing steel in concrete structures not only shortened the life of structures but also it is necessary a great repair cost to return and protect to the health condition. Using Nitrite inhibitors is a typical protection method. But there is no materials for the study about corrosion protection using nitrite. Therefore it is important to evaluate the additional rate and influence on congealment using the nitrite inhibitors in cement paste which is originally the basic material and crucial factors consisting concrete. The purpose of this study is finding influence of the type of nitrite inhibitors and mixing ratio on congealment of cement paste, and finding best corrosion inhibitors and ratio in cement paste.

• 한국건축시공학회지
• /
• 제12권6호
• /
• pp.575-585
• /
• 2012

The extruded cement panel, which has many advantages as a prefabricated method, has been limited in its application due to its low fire-resistance. However, an extruded cement panel produced by mixing a-hemihydrate gypsum offers dramatically improved fire-resistance and is expected to have wide-ranging applications in the construction sector as an interior material or partition wall between housing units. Sound insulation performance is very important for the partition wall between housing units. In this study, the sound insulation performance of the extruded cement panel produced through the mixture of a-hemihydrate gypsum is reviewed in order to determine its usability for a partition wall between housing units and for interior materials. Through the review it was found that the wall formed using the extruded cement panels produced by mixing the a-hemihydrate gypsum have ★★★ class in sound insulation test, equal or superior compared with the other two types of extruded cement panel walls currently available in the market.

• 한국응용과학기술학회지
• /
• 제14권2호
• /
• pp.27-34
• /
• 1997

Naphthoquinone-1,2-diazide-5-sulfonyl [NDS]derivatives members of Quinone diazide compound that are utilizable as photoresist for printing plate were synthesized, and photoresist were prepared by mixing these derivatives with a matrix resin(PF, CF) at various weight ratios. Photosensitive characteristics of photoresist were studied by Gray scale method, and SEM to analyze if they can be used as photosensitive material in a printing plate. Experimental results showed using IR, UV, NDS derivatives were photoconverted and developer-soluble photoresist were produced. Photoresist in the mixing ratio of 1:4 of NDS[II] and CF resin gave rise to the highest dissolution rate. In addition, photoresist obtained at this condition resulted in the most superior sensitivity.

• 한국항만학회지
• /
• 제9권1호
• /
• pp.65-72
• /
• 1995

This study is being done for the purpose to achieve a stable demand and supply of materials for long term. The author investigated condition of suitable mixer design method for concrete, an individual value and a character of dynamics as a supplement material by drying up the natural aggregate, and a possible practicalization plan to reduce defects to the minimum. As a result of this study, it can be acquired a good quality of concrete by the use of the natural sand (Nak Dong river sand) and the crushed sand with suitable mixing ratio. The fineness modulus (F.M) of mixing aggregate is $2.7\pm1$ at this time and this is good for workbility and plasticity of concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.48-49
• /
• 2020

Recently, as people's interest in environmental pollution increases, interest in indoor air pollution as well as outdoors is increasing. Accordingly, this study prepares functional paints by mixing powder activated carbon, which is a porous material, into aqueous paints, and examines the adsorption performance of volatile organic compounds (VOCs) and formaldehyde (HCHO). As a result of the experiment, the concentration of volatile organic compounds (VOCs) and formaldehyde (HCHO) tended to decrease as powder activated carbon was incorporated. It is believed that physical adsorption was achieved by the micropores of powdered activated carbon. However, in the adsorption test method, it is judged that the concentration was affected by the inflow of outside air as the chamber cover was opened to put the test object in the empty chamber where a certain concentration was maintained.

• 한국지반신소재학회논문집
• /
• 제15권1호
• /
• pp.21-35
• /
• 2016

최근 철도는 고속화를 위해 콘크리트궤도를 적용하는 추세이고 연약지반 구간에 건설된 철도는 장기간에 걸친 작은 양의 침하발생으로도 침하에 민감한 콘크리트 궤도의 침하량 허용범위를 초과하여 궤도의 손상과 뒤틀림을 초래할 수 있다. 연약지반에 건설된 철도의 잔류침하를 효과적으로 제어 할 수 있는 방법으로 성토지지말뚝공법을 들 수 있으며 성토하중을 말뚝머리로 전달하기 위해 콘크리트 슬라브가 사용되기도 하나 하중이 전달되는 과정에 나타나는 성토체 내부의 아칭효과를 극대화하는 토목섬유를 이용한 방법이 보다 경제적이다. 그러나 토목섬유 등으로 인해 집중된 성토하중을 받는 성토지지용 말뚝은 일반적으로 교량구조물에 사용하는 PHC말뚝을 그대로 사용하고 있으며 이는 필요이상으로 높은 강도의 재료를 사용함으로써 재료의 효율성이 크게 떨어지고 있는 실정이다. 이에 따라 해외의 적용사례 조사를 통해 성토지지용으로 가장 적합한 말뚝의 형식으로 현장타설 콘크리트 말뚝을 선정하고 산업부산물을 이용한 배합설계와 압축강도시험을 통해 성토지지용 말뚝재료의 최적 배합조건을 도출하였다. 그리고 최적배합조건을 적용한 성토지지용 현장타설말뚝이 기존 PHC말뚝에 비해 재료의 효율성이 약 2.8배 뛰어나다는 것을 수치해석을 통해 확인하였다.

• 한국항해학회지
• /
• 제15권1호
• /
• pp.1-9
• /
• 1991

The coaxial sample holder with 20mm in diameter and the adaptor from type N connector-to-20mm${\phi}$ coaxial tube are designed and manufactured which have been used for designing and measuring the fabricated microwave absorber. In addition, the measure in method of material constants of the microwave absorbers is described, which is focused on minimizing the error due to the sample's shapes, the fitting conditions, etc. After describing the design method of a single-layed microwave absorber, the microwave absorbers for X-band, C-band and S-band RADARs are designed and fabricated, respectively, which are composed of ferrite, carborn, and binder and have good performance. Futhermore, we develop the high performance microwave absorber in extremely wide-band type for RADAR, which is composed of different material and its mixing ratio and which could cover nearly from 4 to 10 GHz.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.381-382
• /
• 2008

$TiO_2$ colloidal solution was electrosprayed for preparing a conductive thin film with high quality. Electrospray is a technique of liquid dispersion electrically and a good method of manufacturing nanoparticle, nanofiber, porous membrane, film preparation and coating. Water and ethanol were used as solvents and their mixing ratio was varied for studying the influence of solvent volatile on nanoparticle dispersion. Various nozzles to control the thru-put of solutions.were examined. Integrated analytical method and scanning electron microscope were used to analyze integrity and microscopic images.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.367-370
• /
• 1998

In this paper, based on the research of high temperature YBCO superconductor, using the Yb instead of Y, with the YbBCO superconductor powder which was combined by means of conventional solid reaction, textured directional crystal was prepared by MCP method and the character was analyzed. Mixing the starting elements and calcining at 890$^{\circ}C$, 900$^{\circ}C$, 910$^{\circ}C$, single phase YbBCO, Yb$_2$BaCuO$\sub$5/ and BaCuO$\sub$2/ were certified. And from the powder which was calcined at 900$^{\circ}C$ the, sample which became texture-growth by MCP method was well oriented. The result of DTA measurement, the fusing point of YbBCO superconductor and it\`s critical current was measured to be 979$^{\circ}C$, 87K respectively. The critical current density was obtained at the value of 700A/$\textrm{cm}^2$(77K. 0H) calculated by Bean's Model using the measured hysteresis curve of VSM.