• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.317-317
• /
• 2006

This study is about Sealant for LCD panel which used m manufacture of liquid crystal display device with LC dropping method, with the least contamination of liquid crystals, the best adhesion of glass and Improvement of photoreaction for shaded area.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.116-117
• /
• 2009

In this study, As a previous stage to manufacture disposable tent for military camouflage, we examine possibility of inorganic material absorption on PET surface. In order to, we created unevenness by sputtering process on PET surface and made absorption with Zirconium (ZIA) that has nano particles. and we went on study to its effect.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.198-202
• /
• 2002

In this paper, stability of ultra precisio unit is analyzed, this unit is the kernel unit precision processing machine. According alteration of shape and material about stability investigation is performed. Through this stability investigation, trial is reduced in design and manufacture, at the time, we are accumulated foundation data for control.

• Structural Engineering and Mechanics
• /
• v.67 no.1
• /
• pp.79-85
• /
• 2018

Topology optimization of steel and concrete composite based on truss-like material model is studied in this paper. First, the initial design domain is filled with concrete, and the steel is distributed in it. The problem of topology optimization is to minimize the volume of steel material and solved by full stress method. Then the optimized steel and concrete composite truss-like continuum is obtained. Finally, the distribution of steel material is determined based on the optimized truss-like continuum. Several numerical results indicate the numerical instability and rough boundary are settled. And more details of manufacture and construction can be presented based on the truss-like material model. Hence, the truss-like material model of steel and concrete is efficient to establish the distribution of steel material in concrete.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.12a
• /
• pp.407-413
• /
• 1999

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.27-32
• /
• 2008

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.787-796
• /
• 2010

The main reason of the earth global warming is $CO_2$ and the regulation about it in the whole world has been reinforced to reduce $CO_2$ emission. It is needed that we should reduce it in the process at the production of concrete generated much of $CO_2$ emission as the primary material of construction industry recognized unfriendly environment industry. Based on a concrete, this study was constructed the system to evaluate $CO_2$ emission generated in the stage of material production, transportation, manufacture and developed the program to reduce and evaluate it efficiently. As a result, most of $CO_2$ emission is generated in the stage of material and it is quantitatively evaluated $CO_2$ emission generated in the stage of materials, transportation and manufacture. Moreover, the evaluation system of the volume of $CO_2$ emission which has the friendly environment technology about reduction of $CO_2$ emission at each stage is suggested for quantitatively evaluation $CO_2$ emission generated in the process at the production of concrete and remicon production company could use it to evaluation $CO_2$ emission.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1164-1167
• /
• 2003

Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.620-627
• /
• 2005

In this study, life cycle assessment (LCA) on one of corrugated cardboard box as functional unit was carried out. System boundary of this study divided according to raw material acquisition, corrugated cardboard manufacture and corrugated cardboard box manufacture stage. And environmental impacts are evaluated on each stage and sub-process. The impact categories are classified into eight categories of abiotic resource depletion, global warming stratospheric ozone depletion, photochemical oxidant creation, air acidification, eutrophication, ecotoxicity and human toxicity. From the results, it is found that environment impacts at raw material acquisition stage is the highest as about 92% of whole stage due to liner board manufacture stage. The highest environmental impacts at sub-process of corrugated cardboard and box manufacture stage is a single facer and D/W backer process that included as main process in corrugated cardboard manufacture, and is caused by used energies like electricity, B-C oil, and etc. And then diagnosis for clean production process system of package is carried out. Through diagnosis, on loss rate is reduced and inner pressure intensity of box is improved. After improvement, environmental impact was decreased about 3.8% compared with before improvement.

• Journal of Powder Materials
• /
• v.15 no.5
• /
• pp.359-364
• /
• 2008

To satisfy the demand of higher cutting performance, mechanical properties with tungsten carbide (WC-Co) tool materials were investigated. Hardness and transverse rupture strength with WC grain size, Co content and density were measured. Compared to H, K, and S manufacture maker as tungsten carbide (WC-Co) tool materials were used for high-speed machining of end-milling operation. The three tungsten carbide (WC-Co) tool materials were evaluated by cutting of STD 11 cold-worked die steel (HRC25) under high-speed cutting condition. Also, tool life was obtained from measuring flank wear by CCD wear measuring system. Tool dynamometer was used to measure cutting force. The cutting force and tool wear are discussed along with tool material characteristics. Consequently, the end-mill of K, H manufacture maker showed higher wear-resistance due to its higher hardness, while the S maker endmill tool showed better performance for high metal removal.