• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2008.05a
• /
• pp.93-96
• /
• 2008

The childhood reading and physical environments are an important factor for shaping personality and values established. Therefore, We have to provide a quality environment for correct reading habits to children. the purpose of this study is to provide a basic interior data through the analysis of case study. for this purpose this study has analyzed of 5 children's reading room of public libraries built in Seoul since 2000. especially the research which it analyzed these reading room of forms of space, furniture, color, finish material, lighting. the results of this study are follows : Chairs and desks were not considered of children's scale or uniformly made. compositions of convenient facilities has insufficient component. finish material and lighting plan is similar to adults reading room plan. To give correct reading habits and interest to children, considered space design is necessary.

• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.3
• /
• pp.27-35
• /
• 2005

This study is about finding out characteristic of recognition individual housing in seaside of Donghae. To accomplish this purpose, we survey the 150 houses related to the landscape. Thus the major analysis is to take basic data, such as image(modern, western, traditional, etc) about exterior form of housing corresponding to the landscape. The result summarized as follows First, the elements for the characteristic of recognition were exterior material finish, exterior color, roof type, roof material finish, window size, roof slope, area of wall vs roof. Second, the image of traditional housing was very insufficient to plan landscape of housing with design elements. This research suggests that landscape housing of future is to be environmental landscape design and the proper design is to be various considering not only user's preference but also control of landscape.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.4
• /
• pp.405-420
• /
• 2003

Purpose : The purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown. and 0.5mm width chamfer finish lines on the maxillary central incisor. Material and method : After 15 metal dies were made for each group, the IPS Empress all ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the metal die. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co. Germany)was used to measure the fracture strength with loading on the incisal edge. And also, three-dimensional finite element stress analysis was used to measure the stress distribution with the various types of the finish lines(1.0mm width rounded shoulder, 0.5mm width chamfer), the loading site(incisal edge, incisal $\frac{1}{3}$) and the type of loading(concentration loading, distribution loading). Results and conclusion : 1. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(876N) and the mean fracture strength of chamfer(882N) did not skew any significant difference between each other(p>0.05). 2. The stress distribution of all ceramic crown in three dimensional finite element analysis showed concentration aspect at loading point and cervical area or labial surface. 3. In metal die, there were no differences in stress distribution between finish lines, but in natural teeth model, chamfer finish line showed higher stress than rounded shoulder finish line. 4. When force was loaded on the incisal edge the stress was concentrated on the incisal edge and the cervical area of labial surface. When force was loaded on the incisal $\frac{1}{3}$, the stress concentrated on the cervical area of labial surface and the cingulum area. 5. Generally, natural teeth model showed higher and various stress than the metal die.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.6 s.28
• /
• pp.160-170
• /
• 2005

Because designers want to express various elevation, architectural concrete has recently paid attention to finish material and has increasingly used in the construction. architectural concrete needs more careful and professional supervision works such as controling quality of color, texture, construction plan, and design plan. none the less, It is not clear to define process and manage methods for the construction life-cycle, which causes the expense to increase and the quality to be poor. this study will analyze concrete finish method by dividing three parts which are common, exposed and architectural concrete finish method. definition and the limit of application in architectural concrete finish method will be present by comparing three methods. Throughout an interview with a staff in charge and a case study, this paper shows the requirement and the keynote of management which are divided by three steps; the design, construction and maintenance. finally, this research provides management methods of individual steps for effective construction.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2007.04a
• /
• pp.37-47
• /
• 2007

Factor : Structure Metal pad & SMO size Board level TC test : - Large SMO size better Board level Drop test : - Large SMO size better Factor : Structure Substrate thickness Board level TC test : - Thick substrate better Board level Drop test : - Substrate thickness is not a significant factor for drop test Factor : Material Solder alloy Board level TC test : - Not so big differences over Pb-free solder and NiAu, OSP finish Board level Drop test : - Ni/Au+SAC105, CuOSP+LF35 are better Factor : Material Pad finish Board level TC test : - NiAu/NiAu is best Board livel Drop test : - CuOSP is best Factor : Material Underfill Board level TC test - Several underfills (reworkable) are passed TCG x500 cycles Board level Drop test : - Underfill lots have better performance than non-underfill lots Factor : Process Multiple reflow Board level TC test : - Multiple reflow is not a significant actor for TC test Board level Drop test : N/A Factor : Process Peak temp Board level TC test : - Higher peak temperature is worse than STD Board level Drop test : N/A Factor : Process Stack method Board level TC test : - No big difference between pre-stack and SMT stack Board level Drop test : - Flux dipping is better than paste dipping but failure rate is more faster

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.5
• /
• pp.33-37
• /
• 2000

Now many IHTERMINGLER manufactures are under developing new types which can decrease the air consumption and at the same time can improve the efficiency of operating. The material and surface finish of yarn chamber is important factors to make INTERMINGLER. Normally ceramic material and tungsten carbide is used for yarn chamber but now chemical diffusion process for metal is widely used for material and it is very successful considering the hardness of surface.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.151-152
• /
• 2015

Concrete parking slab is often deteriorated severely after winter season because of concrete's freezing and thawing phenomenon. In this study, some methods to improve resistance against freezing-thawing is experimentally tested.: 1) concrete strength, 2) air content in concrete, 3) saw-cut effect and finish material. After experiment, in case of no finishes, 24MPa concrete with 4% air content is tested best result in terms of relative elastics modulus among testes ones. In case of concrete with finishes, all specimens are improved regardless of finishes compared to concrete with no finishes. Improvement degree compared to no finish is as follows : Polyurea > Resin-mortar > hardener and the number of improvement degree is 5, 4, 2% respectively. Further work is required considering construction site condition such as gaining water on surface and remicon in order to reflect site condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1958-1966
• /
• 2003

Three-axis CNC surface machining entails a series of processes including rough cutting, intermediate cutting and finish cutting for a reference surface defined in CAD/CAM. This study is targeting development of an integrated NURBS surface interpolator that can incorporate rough, intermediate and finish cutting processes. In each process, volume to be removed and cutting condition are different according to the shape of a part to be machined and the reference surface. Accordingly, the proposed NURBS surface interpolator controls motion in real-time optimized for the machining conditions of each process. In this paper, a newly defined set of G-codes is proposed such that NURBS surface machining through CNC is feasible with minimal information on the surface composition. To verify the usefulness of the proposed interpolator, through computer simulations on NURBS surface machining, total machining time, size of required NC data and cutting force variations are compared with the existing method.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.177-185
• /
• 2012

The purpose of this study is to use as the basic data for design method in commercial space. So, we analyzed whether any emotion was induced by finishing materials in the commercial space. And we was to suggest expression methods of finish materials to induce in the emotional space. The results of this study are as follows : First, we could know that the emotional design is needed to enhance satisfaction of consumers. The role of finishing material is very important in emotional expression in the commercial space. Second, we extracted the adjectives vocabulary(14 pairs) to evaluate the space emotion. we could educe the four kinds of space emotion by Factor Analysis. In addition, we could arrange the emotional words to represent each space type(Decoration : 5 pairs, Expand : 4 pairs, Limitation : 3 pairs, Hierarchy : 2 pairs). Third, to use finishing materials and wall is very effective to induce the emotion in the emotional space. To use the color is good among the elements of finishing materials. Fourth, We could find that the center of the types of emotional space was induced with the boundary and the decoration. If we use contrasting colors and accent colors in the commercial space, we can induce the center and the boundary together. And if we use colorful or unusual patterns, we can induce the center and the decoration together. Fifth, To induce the expand, we should finish with one color in space. And To induce the center, we should finish with one type of the color or pattern and then we should partially use the contrast color and special pattern. the case of boundary, it is good method to part emphasize by color, texture and materials. And we can induce the decoration with materials and patterns.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.7-10
• /
• 2001

Distribution Automation System (DAS) has been designed and implemented for feeder automation using the Paircable, Optical-Fiber, Wireless, TRS as a communication media. KEPCO has been constructed DAS since 1984. We have two types of DAS. one is large-scale DAS for major city in korea, the other is small-scale DAS (or the rest of major city. we are plan to finish small-scale DAS by end of 2001.