• 산업기술연구
• /
• 제20권B호
• /
• pp.77-86
• /
• 2000

In order to observe the pattern forming of copper plate and chemical corrosion reaction, a study on the effect of the process parameters on the formation of micro-pattern by a photochemical etching of copper plate was carried out. The results are as follows : 1) Etching rate increases as the concentration of etchant increases under the regular condition of the temperature by the increasing of diffusion rate to surface. 2) Etching rate increases as the temperature of etchant increases by the fast acting of the material delivery of diffusion to surface under the regular condition of concentration. 3) It was found that etching speed increases as the material delivery of convection rising increased when the aeration speed of etchant increases. This result was from the fact acted by the material delivery of convection rising rather than material delivery of diffusion to the surface.

• 여성건강간호학회지
• /
• 제22권1호
• /
• pp.21-29
• /
• 2016

Purpose: This study aimed to develop supplementary material about the electronic fetal monitoring for nursing students, and to test the effects on electronic fetal monitoring related knowledge and confidence on nursing performance in delivery room. Methods: Totally 58 nursing students were recruited either experimental group (n=30) or a control group (n=28). A non-equivalent control group pretest-posttest design was employed to test the effects on fetal monitoring related knowledge and confidence on nursing performance in delivery room. The supplementary material about the electronic fetal monitoring was developed based on Analysis, Design, Development, Implement and Evaluation (ADDIE) model. Fetal monitoring related knowledge and confidence on nursing performance in delivery room were self-reported by the scales that author developed. Data were collected at pre-test and after the 6-week intervention. Results: There was significant difference in confidence on nursing performance in delivery room between two groups after intervention. Conclusion: These findings suggest the importance of the supplementary material about the electronic fetal monitoring for nursing students to improve confidence on nursing performance in delivery room.

• 산업경영시스템학회지
• /
• 제26권2호
• /
• pp.68-74
• /
• 2003

Modem automated manufacturing processes employ automated guided vehicles(AGVs) for material handling, which serve several machining centers(MCs) in a factory. Optimal scheduling of AGVs can significantly help to increase the efficiency of the manufacturing process by minimizing the idle time of MCs waiting for the raw materials. In this paper, we will analyse the requirements for an optimal schedule and then provide a mathematical framework for an efficient schedule of material delivery by an AGV. With this model, the optimal number of MCs to be utilized will also be determined. Finally, the material delivery schedule employing multiple journeys to the MCs by the AGV will be carried out. Through rigorous analysis and simulation experiments, we shall show that such a delivery strategy will optimize the overall performance.

• 한국건축시공학회지
• /
• 제11권3호
• /
• pp.319-325
• /
• 2011

건설공사는 수많은 자원 중 상당부분이 자재공급업체에서 제공하는 자재의 원활한 공급에 따라 작업의 원활성이 결정된다. 자재를 적기에 조달하고 배분하는 결과에 따라 작업이 순조롭게 진행되고 궁극적으로 소기의 공사기간 내에 공사를 완료할 수 있다. 본 연구는 데이터 웨어하우스 기술을 활용하여 건설공사에서 중요한 자재관리에 활용할 수 있는 방법을 제시하였다. 건설공사의 자재관리를 위해 필요한 자재리드타임, 자재조달비율, 자재설치비율 등에 대한 정보를 다차원적으로 분석하고 KPI를 설정하여 의사결정 정보로 활용할 수 있도록 하였다. 궁극적으로 본 연구는 건설공사의 운영계 시스템에서 발생하는 수많은 자재관련 데이터들을 효과적으로 활용하는 방법을 제시하였다. 즉, 주제 중심적이고 통합적인 데이터를 제공할 수 있는 데이터 웨어하우스 기술을 활용하여 체계적인 자재관리 정보를 제공할 수 있도록 하였다.

• 산업경영시스템학회지
• /
• 제45권3호
• /
• pp.40-48
• /
• 2022

An automated material handling system (AMHS) has been emerging as an important factor in the semiconductor wafer manufacturing industry. In general, an automated guided vehicle (AGV) in the Fab's AMHS travels hundreds of miles on guided paths to transport a lot through hundreds of operations. The AMHS aims to transfer wafers while ensuring a short delivery time and high operational reliability. Many linear and analytic approaches have evaluated and improved the performance of the AMHS under a deterministic environment. However, the analytic approaches cannot consider a non-linear, non-convex, and black-box performance measurement of the AMHS owing to the AMHS's complexity and uncertainty. Unexpected vehicle congestion increases the delivery time and deteriorates the Fab's production efficiency. In this study, we propose a Q-Learning based dynamic routing algorithm considering vehicle congestion to reduce the delivery time. The proposed algorithm captures time-variant vehicle traffic and decreases vehicle congestion. Through simulation experiments, we confirm that the proposed algorithm finds an efficient path for the vehicles compared to benchmark algorithms with a reduced mean and decreased standard deviation of the delivery time in the Fab's AMHS.

• Korean Chemical Engineering Research
• /
• 제58권3호
• /
• pp.450-457
• /
• 2020

선행된 연구에서 Yo-Pro-1의 전달 효율의 경향과 CFP 유전자의 발현 효율의 경향이 큰 차이를 보였지만 이 문제에 대한 원인을 제시할 수 없었다. 따라서 본 연구에서는 형광 염료를 이용하여 DNA에 표지 후 전달 효율을 정량화함으로써 이 문제에 대한 원인을 찾고자 한다. 표지를 위한 형광 염료로 Yo-Pro-1을 사용하였으며, Yo-Pro-1과 표지 된 DNA의 전달 효율을 비교하였다. 전압 조건에 따른 전달효율 비교에서는 Yo-Pro-1과 Yo-Pro-1으로 표지 된 DNA의 전달 효율 모두 96 V에서 전달 효율이 최대가 되었으며 전압이 더 증가하면 전달 효율이 오히려 감소하는 경향을 보였다. 전압 인가 횟수 조건에 따른 전달 효율 비교에서는 Yo-Pro-1과 Yo-Pro-1으로 표지 된 DNA의 두 전달 물질 모두 8회의 전압 인가 횟수에서 전달 효율이 최대가 되었으며 전압 인가 횟수가 더 증가하면 전달 효율이 감소하는 경향을 보였다. 두 결과를 통해 디지털 전기천공시스템에서 Yo-Pro-1을 사용한 전달 효율 측정이 DNA의 전달 효율을 잘 대변하는 것을 확인하였다. 또한, 본 연구의 결과를 통해 선행된 연구에서 보인 Yo-Pro-1의 전달 효율의 경향과 CFP 유전자의 발현 효율의 경향 차이는 전달 물질의 전달 효율 차이에서 기인한 결과가 아닌 전달 된 유전 물질의 발현 과정에서의 문제로 인한 결과임을 추론해 볼 수 있었다.

• 한국건축시공학회지
• /
• 제12권6호
• /
• pp.648-663
• /
• 2012

With recent attempts to improve quality and productivity, the prefabrication manufacturing system has been occupying an increasing share of the construction area. To minimize site work, material is more frequently being produced and partially assembled at a plant, and then installed at a site. For this reason, the production process is being divided and the materials are being delivered to the site after passing through multiple plants. With these changes in the production process, the materials delivery plan is becoming an important management point. In particular, as road transportation using trucks has a 71 percent share of the domestic transportation market, selecting the proper transportation path is important when delivering materials and equipment to a site. But the management system at the project design phase to calculate the delivery cost by considering the production process of the pre-fab material and the $CO_2$ emission at the material delivery phase is currently lacking. This study suggests a process design model for assembly production of the pre-fab material and transportation logistics based on carbon emission. The suggested model can be helpful to optimize the location of the intermediate plant. It is expected to be utilized as a basic model at the project plan and design phase when subcontractors make decisions on items such as materials procurement, selecting the production method, and choosing the location of the assembly plant.

• 경영과학
• /
• 제29권1호
• /
• pp.131-141
• /
• 2012

The automated material handling systems today are playing ever more important roles in semiconductor/LCD fabrication facilities. Recently they became more flexible, intelligent, and speedy than in the past. The facilities have been fully automated because the size and weight of the unit loads used in the facilities were being increased beyond the limits that a human operator can handle. This research develops an efficient procedure to streamline the delivery of unit loads by the automated material handling system (AMHS). For this task, the research employs the event scheduling theory that has been successfully used in the both academia and industry. The developed procedure was applied to an actual LCD fabrication facility and improved the performance of an existing material handling system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.448-451
• /
• 2002

The possibility of using polypyrrole as a drug delivery system(DDS) has been studied using indicate (Phenol red) and substance with therapeutic activity(Sodium salicylate). In aqueous solution, negative potential is applied to polypyrrole then anion(with therapeutic activity) of sodium salicylate is released by redox processes of polypyrrole. The release amount of anionic drugs from polypyrrole is measured by UV-visible spectrometer which can measure UV-absorbance of materials. Electrode area that use for release amount measurement is$50mm^{2}(5{\times}10mm)$,and thickness of polypyrrole membrane is $15{\mu}m$. DC 1V applied in saline solution, the release amount according to time increased gradually. In various electrode area, release amount of anionic drug is directly to electrode area.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호spc1호
• /
• pp.21-32
• /
• 1995