• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1652-1657
• /
• 2021

Nuclear materials can be utilized not only for peaceful uses, but also for military purposes; hence, the international community has devoted itself to the control, management and safeguarding of nuclear materials. Nuclear materials are of varying degrees of usability for development of nuclear weapons. Thus, several methods for assessing the attractiveness of nuclear materials for nuclear weapons purposes have been proposed. When these methods are applied to unirradiated depleted, natural, and low-enriched uranium (DU, NU, and LEU), they are certainly classified as non-attractive nuclear materials. However, when nuclear material attractiveness is to be evaluated for potential radiological dispersal device (RDD) uses, it is required to develop a different method for the different aspects and factors. In the present study, we derived a novel method for evaluating nuclear material attractiveness for use in RDD development. To this end, the specific activity and dose coefficient were identified as the two sub-factors, and, in consideration of those, the mass causing detrimental health effects was determined to be the main factor impacting on nuclear materials attractiveness. Based on this factor, the attractiveness of unirradiated DU, NU, and LEU for RDD use was qualitatively compared with that of ¹³⁷Cs.

• Nuclear Engineering and Technology
• /
• v.56 no.9
• /
• pp.3969-3980
• /
• 2024

Over the years, numerous evaluations of material attractiveness have been performed for conventional light water reactors to better understand the nature of the spent fuel material and its desirability for misuse at different points in the nuclear fuel cycle. However, availability of such assessments for newer, Generation IV reactors such as Molten Salt Reactors is rather limited. In the present study we address the gap in knowledge of material attractiveness for molten salt reactor systems and describe the nature of irradiated fuel salts which the nuclear safeguards community might be faced with in the near future as more and more such reactors enter commission and operation. Within the scope of the paper, we use a large database of simulated irradiated fuel salt isotopics (and other derived quantities such as gamma activity, decay heat, and neutron emission rates) developed specifically for a molten salt reactor concept in order to shed some light on possible weapons usability of uranium and plutonium present in the irradiated fuel salts. This has been achieved by proposing a new attractiveness metric that is better suited for quantifying attractiveness of irradiated salts from a model molten salt concept. The said metric has been computed using a database that has been created by simulating the irradiation of molten fuel salt in a concept core over a wide range of operational parameters (burnup, initial enrichment, and cooling time) using the Monte-Carlo particle transport code, Serpent. With the help of this attractiveness metric, the findings from this study have shown that in relative terms, molten salt spent fuel is more attractive than spent fuel produced by a conventional light water reactor. The findings also underscore the need for strengthened safeguards measures for such spent fuel. These results are expected to be useful in the future for regulatory authorities as well as for nuclear safeguards inspectors for designing a functional safeguards verification routine for irradiated fuel of such unique nature.

• Journal of Fashion Business
• /
• v.19 no.1
• /
• pp.47-61
• /
• 2015

Recently, female announcers in the baseball programs on television are drawing attention to their fashion. This study analyzes the shape, color, material, detail, and accessory of female announcers in the baseball programs broadcasted by KBS N SPORTS, MBC SPORTS+, SBS Sports, and XTM. The characteristics of their fashion were classified into reliability, popularity, differentiation, attractiveness, and dynamics. The analysis showed that the fashion of the female announcers of KBS N SPORTS showed reliability in shape, color, material, accessory, popularity, and differentiation in detail. For MBC SPORTS+, the popularity was shown in shape, color, material, and attractiveness was shown in detail. For SBS Sports, the differentiation and attractiveness were shown in material, and the differentiation and dynamics were shown in accessory. For XTM, the attractiveness and dynamics were shown in shape, the differentiation and dynamics were shown in color, the dynamics were shown in material, and the popularity was shown in accessory.

• Nuclear Engineering and Technology
• /
• v.54 no.7
• /
• pp.2660-2669
• /
• 2022

The attractiveness for weapons usage of the proposed fuel cycle for the PT-SCWR was evaluated in this study using the Figure-of-Merit methodology. It was compared to the attractiveness of other fuel cycles namely, Low Enriched Uranium (LEU), U/Th, Re-enriched Reprocessed Uranium (RepU), and Pu/Th/U. The optimal content of natural uranium, which can be added to Pu/Th to render the produced U-233 unattractive, was found to be 9%. A ranking system to compare the attractiveness of the various fuel cycles is proposed. RepU was found to be the most proliferation resistant fuel cycle for the first 100 years,while, the least proliferation resistant fuel cycle was the originally proposed Pu/Th one. The reactivity feedback coefficients were calculated for all proposed fuel cycles. All studied reactivity coefficients have the same sign implying that all the fuel cycles will behave neutronically in a similar way. The Pu/Th/U fuel was found to have the most negative value of the Coolant Void Reactivity which will help to restore the core to a safe status faster in case of a loss-of-coolant accident. The fuel and moderator temperature coefficients did not show significant differences between the fuels studied.

• Nuclear Engineering and Technology
• /
• v.52 no.12
• /
• pp.2874-2879
• /
• 2020

Due to excess reactivity, fresh nuclear fuel often contains burnable poisons. This research looks at six different burnable poisons and their impacts on reactivity, material attractiveness, and waste management. An MCNP simulation of a PWR fuel pin was performed with a fuel burnup of 60 GWd/MTHM to determine when each burnable poison fuel type would decrease below a k_∞ of 1. For determining the plutonium material attractiveness in each burnable poison fuel type, the plutonium isotopic content of the used fuel was evaluated using Bathke's Figure of Merit formula. For the waste management analysis, the thermal output of each burnable poison fuel type was determined through ORIGEN decay simulations at 100 and 300 years after being discharged from the core. The performance of all six burnable poisons varied over the three criteria considered and no single burnable poison performed best in all three considerations.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.3 no.3 s.3
• /
• pp.1-10
• /
• 2005

The objectives of this research were to find out factor of image perception about women's accessories, to test differences in image evaluation according to materials and forms, and to investigate differences in image evaluation according to total stimuli. The results of this study were as follows. First, the accessory image factor derived four categories: attractiveness, prettiness, gorgeousness, and soft. Second, in two dependent variables, material and form had no significant interaction effects on attractiveness, prettiness, gorgeousness, and soft. In main effect, there was a significant difference of attractiveness, prettiness, and gorgeousness according to form. That is, the lined types had better prettiness and gorgeousness than the attachable ones. There was a significant difference of attractiveness, prettiness, gorgeousness, and soft according to materials. That is, pearl was considered to be the most attractive and soft. Plastic was evaluated image of least fashionable and soft, gold did image of the least gorgeous. Third, the attractiveness of attachable diamond earring was evaluated the highest, and the lined plastic ones did the lowest. It was evaluated and concluded that the lined plastic ones is considered the prettiness and most gorgeous where as any earring with attachable gold earring were considered the least prettiness and gorgeous. The attachable silver or pearl earrings were considered to be projecting the softest image whereas the lined gold and attachable plastic ones the opposite.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.8
• /
• pp.1216-1227
• /
• 2002

The objective in the part H of this study was to investigate the effects of materials, sleeves, trimming, and perceivers gender on impression formation. Stimuli consisted of 13 color photographs of a female model wearing a wedding dress which were manipulated according to clothing cues. A semantic differential sale of 4 dimensions was used. These were attractiveness, neatness, femininity, and prettiness. Samples were 312 males and females. For the effect of sleeves, there were significant main effects in attractiveness, femininity, neatness, and prettiness. Three-quarters lace ruffled sleeves increased the perception of positive attractiveness, femininity, and prettiness. Flounced sleeves had a positive effect on the perception of neatness. Long-tight sleeves had a negative effect on the perception of attractiveness, femininity, and prettiness. Sleeveless dresses increased the perception of negative neatness. There was an interaction effect between sleeves and the perceivers gender on neatness. For the onぉ of material, there were significant main effects in neatness, femininity, and prettiness. Solid cloth had a positive effect on the perception of neatness and negatively on prettiness. The combination of lace and solid cloth increased the perception of positive femininity and prettiness. lace had a negative effect on the perception of neatness. Satin increased the perception of negative femininity. There was an interaction effect between material and perceivers gender on prettiness. The main effect of trimmings was its effect on prettiness. Ribbons increased the perception of positive prettiness. Not having any trimmings had a negative effect on the perception of prettiness. There was an interaction effect between timings and the perceivers gender on neatness. The results of this study confirm that image perception of wedding dresses becomes different according to the materials, details, and perceiver's gender.

• Magazine of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.6-7
• /
• 2016

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.73-73
• /
• 2009

There are many factors to evaluate nuclear fuel cycle such as safety, public acceptance, economics, etc.. Transparency, proliferation, environment issues, public acceptance and safety are essential to expansion of nuclear industry and proliferation resistance is one of key constraints in the deployment of advanced nuclear energy systems. Proliferation resistance is being considered as one of the most important factors in assessing advanced and innovative nuclear systems. IAEA defmes proliferation resistance as characteristics of nuclear energy system that impedes the diversion or undeclared production of nuclear material [1]. Barriers to proliferation is consist of intrinsic and extrinsic barriers(institutional measures). Intrinsic barriers are characterized in material barriers and technical barriers in general. Material barriers is intrinsic, or inherent, qualities of materials that reduce the inherent desirability or attractiveness of the material as an explosive. Isotopic, chemical, radiological, mass and bulk, detectability barriers are considered as material barriers attributes [2]. Proliferation resistance is examined for several nuclear fuel cycles based on previous study which is focused on the intrinsic barriers [3-4]. Pyroprocessing and DUPIC are considered as reprocessing technologies in Korea and the PWR direct disposal is considered. Comparative assessments of the proliferation attributes and merits of different fuel cycle systems will be performed and the optimal back-end fuel cycle and strategy will be proposed.

• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.400-411
• /
• 2015

Successful use of displays in stores arouses consumers' curiosity, and induces them to purchase a product after a visit. Facade is a word meaning an external front wall of a building, and is usually the first point of visual contact for the consumers. The present study is an empirical investigation of external appearance of a clothing store, with a $2{\times}2{\times}2$ factorial design of facade, show window, and wall surface material designed for the purpose of the study. Dependent variables were store image variables and attitude toward store. A total of 320 questionnaires from male and female consumers were used for the analysis. Facade type and material had significant main and interaction effects, while show window type had no meaningful effects overall. A facade of irregular design prompted significantly higher levels of perceived 'elegance', 'uniqueness', and 'attractiveness' of the store. Material itself did not have significant influence but did have significant interaction effect with facade design. The interaction effect was found in store attitude as well. In order to create a positive store attitude, a concrete material facade should have an irregular design. Companies owning fashion brands should carefully select facade type and wall surface material in the visual merchandising strategies of a store.