• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.190-194
• /
• 2017

The combustion properties for the prevention of the fire and explosion in the work place are flash point, explosion limit, autoignition temperature (AIT) etc.. The using of the corrective combustion properties of the MSDS (Material Safety Data Sheet) of the handling substance for the chemical process safety is very important. For the safe handling of benzyl alcohol which is widely used in the chemical industry, the flash point and the AIT were measured. And, the lower explosion limit (LEL) of benzyl alcohol was calculated by using the lower flash point which obtained in the experiment. The flash points of benzyl alcohol by using the Setaflash and Pensky-Martens closed-cup testers measured $90^{\circ}C$ and $93^{\circ}C$, respectively. The flash points of benzyl alcohol by using the Tag and Cleveland open cup testers are measured $97^{\circ}C$ and $100^{\circ}C$. The experimental AIT of benzyl alcohol by ASTM 659E tester was measured as $408^{\circ}C$. The LEL of benzyl alcohol measured by Setaflash closed-cup apparatus was calculated as 1.17 vol% at $90^{\circ}C$. In this study, it was to possible predict the LEL by using the lower flash point of benzyl alcohol which measured by Setaflash closed-cup tester.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.2
• /
• pp.18-26
• /
• 2000

Since the regulation of MSDS (Material Safety Data Sheets) had started from July 1996, employers were required to furnish MSDS for the chemicals in use in their workplace. However, many MSDS did not contain upright information for the chemicals, and they were not updated regularly, and were not written in the standard format required by the Industrial Safety and Health Act (ISHA). The purposes of this study were 1) to examine the reliability of MSDS for mixed solvents, 2) to provide reliable MSDS to employers or employees, 3) to find out any difficulties in implementing MSDS after the initiation, and 4) to promote regular MSDS updating and to ensure the reliability of MSDS for chemical manufacturers. To check the reliability of MSDS of mixed chemicals, 21 samples of mostly degreasing solvents were collected along with their MSDS from the work place. The samples were analyzed by gas chromatography-mass selective detector(GC-MSD). Their components were classified as saturated hydrocarbon, cyclic hydrocarbon, aromatics, and halogen containing hydrocarbon, and the amount of each class were measured. Manufacture's MSDS were compared with the actual composition of the collected samples, and further examined the reliability by checking whether the chemicals analyzed were included in the MSDS correctly. Finally, each item of MSDS was evaluated whether the MSDS correspond to the regulation required by ISHA. The results were following: 1) most of the degreasing solvents in MSDS were incorrect in their composition and contents, 2) the information in the MSDS including hazard classification, exposure level, toxicity, regulatory information were incorrectly provided, and 3) some MSDS did not disclose carcinogens in their MSDS. Continuous monitoring of MSDS was required to ensure reliability of MSDS. The Chemicals containing hydrocarbons from C10-C15 need to be tested to provide toxicity data. In addition, governmental support for providing correct MSDS was recommended to ensure reliability of MSDS. The MSDS regulation relating to the confidential business information may need to be revised to ensure reliability of MSDS.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.185-194
• /
• 2018

The purpose of this study was to understand the dental hygienist's perception of dental materials and to understand the safety status of harmful chemicals. The study was conducted from January to February 2015 for 250 dental hygienists working in Gwangju Metropolitan City. as a result, the degree of recognition of MSDS for dental materials was higher with age (P <0.05) and higher in dental hygienist (P <0.001) working at dental hospital. (P <0.001), and the factors affecting the perception of first aid treatment were positively correlated with experience of hazard education (P <0.001). Therefore, by understanding the MSDS awareness of dental materials by dental hygienists and the safety situation in the handling of hazardous chemical substances, we provide basic data for establishing proper recognition of safety in the handling of harmful chemical substances and developing educational programs to prevent accidents.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.287-298
• /
• 2013

Objectives: Workers who use chemicals are exposed to safety accidents and occupational diseases. Employers are required to provide workers with Material Safety Data Sheets (MSDSs) in order to prevent accidents and diseases related to chemicals. Thus, it is very important to offer reliable MSDSs. In this paper, we assessed the reliability of MSDSs for chemicals including formaldehyde. Methods: To evaluate MSDS reliability, we collected 14 MSDSs and bulk samples from the chemical industry. MSDS reliability was evaluated by the completeness of details. In order to evaluate the adequacy of the formaldehyde contents in a mixture, bulk samples were collected and analyzed by HPLC. The result of Globally Harmonized System (GHS) classification was confirmed by identifying physical chemical properties, toxicology information and ecological information. Results: The result of the evaluation of 14 MSDSs showed 76.29% average reliability on each item, especially 53.9% average appropriate rate on hazard risk classification. No chemicals failed to match between the content (%) in MSDSs and the result of analysis. Conclusions: To elevate MSDSs reliability, the certified education of MSDS drafters and reorganization of the MSDS circulation system is required.

• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.540-549
• /
• 2018

This study was conducted on 238 dental hygienists working in Daegu and Gyeongbuk area. In order to understand the status of harmful transmission of dental materials by type of work, we compared the differences in exposure time and work environment characteristics of hospital types and investigated the difference in the degree of recognition of material safety data. The results of the study were as follows: In case of hospitals, the exposure time of dust generated from chemicals was the longest. Resin filling, contact with disinfectant. 37 workers (29.4%) and 14 workers (12.5%) answered that they perceive the question about whether they are aware of the material safety data sheet (MSDS) for dental materials. There were 18 hospital workers and 6 clinic workers who had experience reading MSDS before using dental materials. The respondents who answered that they provided the material safety data of the dental materials used had a 2.39 times MSDS in hospital workers. Therefore, by recognizing the health hazards of chemical substances in accordance with the characteristics of each type of hospital and continuing to conduct health and safety education, the work environment should be improved by establishing proper recognition of MSDS information. It suggests the necessity of a system that can strengthen the management of chemical information provision and guarantee the strategic approach and workers' right to know.

• Journal of the Korean Institute of Gas
• /
• v.13 no.4
• /
• pp.40-45
• /
• 2009

In order to investigate the compatibility of data in MSDS(Material Safety Data Sheet), the flash point of xylene isomer was measured by using Pensky-Martens closed cup (ASTM D93), Setaflash closed cup(ASTM D3278), Tag open cup(ASTM D1310), and Cleveland open cup (ASTM D92) testers. Also, the AITs(autoignition temperatures) of xylene isomers were measured by using ASTM E659-78 tester. The measured the flash points and the AITs were compared with literatures and MSDS in KOSHA(Korea Occupational Safety and Health Agency). The measured the flash points and the AITs were different from those in literatures and MSDS. As a result, this paper is shown that it is needed to investigate combustion characteristics of xylene isomer for the fire safety objectives.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.340-349
• /
• 2022

Objectives: The importance of MSDS is emphasized for communicating hazardous information due to the increase in the types and usage of chemical substances. The purpose of this study is to assess the reliability of MSDS by collecting and examining paint thinners commercially available in South Korea. Methods: Twenty-five paint thinners were purchased at paint stores and the provision of MSDS was checked. Quantitative and qualitative analysis was performed on the chemical constituents of the thinners using GC-MSD and GC-FID. Reliability was evaluated by the MSDS collection rate for the paint thinners and calculating the rate of matching between laboratory analysis results and the contents and composition of chemical constituents given in the MSDS. Results: Unlike a study conducted in 2006, MSDS were provided for all 25 thinners. As a result of qualitative analysis using GC-MSD, 104 chemical substances were detected. The substances with the highest detection rate were identified in the order of toluene, butyl acetate, acetone, xylene, and ethyl benzene. A component matching rate of 41% was found by comparing the differences between the number of substances detected in laboratory testing and the number of substances listed in the MSDS. Benzene, a carcinogen not listed in the MSDS, was detected in two thinners produced by a small company. The detected benzene contents were 0.039 and 0.040%. When benzene is used, it should be strictly handled according to the Industrial Safety and Health Act. However, since it is not listed on the MSDS, it is judged that benzene was not being managed as a carcinogen in the workplaces where it is used. Conclusions: Since the reliability of MSDS, which play an important role in hazard communication, was evaluated to be low, it is necessary to systematically and continuously secure this reliability. In particular, carcinogens should be managed more strictly.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.352-364
• /
• 2018

Objective: The Korean Industrial Hygiene Association(KIHA) held a forum on "Improvement of Material Safety Data Sheets (MSDS) regulations for enhancing the effectiveness and efficiency in the field" at its 2018 Winter Conference(February 2, 2018). This article summarized the major consensus opinions developed at the forum. Methods: Since the initial implementation of the MSDS system, the contents of the system have changed and related studies have been reviewed. Before the forum, online questionnaires were developed and opinions on the effectiveness of MSDS program were collected from various strata of the occupational health field. We also summarized the key opinions of companies, trade unions, experts, and government officials as discussed at the forums. Results: A total of 265 opinions were gathered through online questionnaire surveys from safety and health managers, trade unions, government officials, and health professionals. The results of online surveys and discussions showed some differences of opinion, but it was a common perception that the current MSDS system is not working effectively in the workplace. It was considered necessary to strengthen MSDS education and to make it easier for workers to understand and deliver the necessary information. In addition, it was confirmed that the supply of and education on MSDS to small- and medium-sized enterprise workers is not being well executed. In particular, MSDS training for subcontract workers should be carried out under the responsibility of the contracting employer. Conclusions: In order for the MSDS system to serve more effectively in the field in the future, it needs to be improved in terms of the effective education and training considering the type of industry and employment.

• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.56-60
• /
• 2007

The usage of MSDS (Material Safety Data Sheet) is increased world widely for the implementation of GHS and REACH. In order to know the accuracy of the data in MSDS the flash point of n-Decanol was measured by using a Tag closed tester, a Seta-flash closed tester, a Pensky-Martens closed tester and a Cleveland open tester in Japan and Korea, respectively. The test results of flash points of n-Decanol purchased different manufacturer were compared to the data of the references and MSDS. The flash points determined in Japan were similar to those in Korea but have shown much difference from those in MSDS and literatures. It is suggested that the results of flash points determined in this research have validity and manufacturers should be more careful when they make MSDS as well as for the classification of GHS and REACH.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.209-215
• /
• 2015

Following the semiconductor industry's growing, various types of toxic gases and caustic chemicals, HF(Hydrofluoric acid), HCI (Hydochloric acid), $H_2O_2$ (Hydrogen peroxide), $H_2SO_4$ (Sulfuric acid), and Piranha, were using on the semiconductor manufacturing process. Therefore many gas leakage accidents that produce huge losses of lives were caused by the processes. This research deeply considers two basic solutions that the necessity of MSDS education on university for reducing damage of lives and protecting life from chemical leak accidents such as a HF accident in Gumi, Korea and the use of GHS, REACH and the comprehension of propriety about using MSDS for keeping safety from conflagrations by released poison chemical materials.