• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.291-293
• /
• 2012

Recently, environmental pollution and global warming and greenhouse gases are increasing, because Efforts to improve are continued throughout the world. As part of the resource recycling industry has become an important research area. In the field of waterproofing industry, focus on the resource recycling is growing, due to serious resource depletion and sharp price. Therefore, in this research on the resource recycling such as reclaimed rubber and rubber waste is enable and these eco-friendly materials are applied high adhesive flexible non-exposed type self adhesion compound waterproofing material was measured eco-friendly performance and field application was evaluated.

• 유기물자원화
• /
• 제20권2호
• /
• pp.76-88
• /
• 2012

본 연구는 생활계폐기물 중 별도로 분리 배출되어 재활용 선별장으로 반입된 재활용 폐기물에 대한 수집운반에서부터 최종처리까지의 흐름을 분석하였다. 연구는 실제 현장조사를 기본으로 실시하였으며, 조사 결과, 최종 재활용 측면에서는 대체적으로는 적정 처리가 이루어지는 것으로 파악 되었으나, 불필요한 이동 및 중간처리 경로를 통해 처리되는 품목이 상당수 있는 것으로 조사되었다. 지자체에서 선별된 폐자원을 처리 또는 수집운반 하는 업체들은 오로지 경제성 원리에 입각한 폐기물 처리비와 운반비 차익을 주요 수익원으로 하기 때문에 불필요한 중간단계 및 장거리 폐기물 이동현상이 나타나게 된다. 따라서 합리적인 자원순환망 구축을 위한 첫 번째 단계는 폐기물 발생원의 근거리에 있는 재활용업체에서의 우선처리원칙이 필요하며, 필요에 따라 인근 지역의 폐기물을 동시에 처리 할 수 있는 광역처리체계 도입이 타당하다.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.74-81
• /
• 2019

Upcycling generally refers to the conversion of waste materials to something useful or valuable and is a useful concept that can be applied not only to the waste design industry but also to waste recycling and resource circulation. Our study highlights upcycling as the key concept for improving the value of waste by redefining the concept as "the recycling of waste materials and discarded products in ways that enhance their value." Four upcycling strategies are linked to material flow analyses conducted on waste electronic and electrical equipment, specifically waste refrigerators and waste computers, to examine the technologies available for implementation and suggest guidelines for the promotion of upcycling. The amount of waste refrigerators collected by the formal sector was 121,642 tons/y and the informal sector, 63,823 tons/y. The current recycling ratio of waste refrigerators was estimated as 88.53%. A total of 7,585 tons/y of waste computers were collected by the formal sector and 3,807 tons/y by the informal sector after discharge. Meanwhile, the current recycling ratio of waste computers was estimated as 77.43%. We found that it is possible to introduce 28 upcycling technologies in the case of refrigerators, and 15 technologies are available to promote upcycling in the case of computers. By refining the broad concept of upcycling and looking at the stages of material flow, our approach presents universally applicable directions for incorporating upcycling in resource recovery and recirculation plans.

• 자원리싸이클링
• /
• 제15권6호
• /
• pp.25-32
• /
• 2006

본 연구에서는 폐자동차의 재활용 향상을 위하여 전량 소각 및 매립에 의해 처리되고 있는 폐자동차 tail lamp를 해체공정에서 회수하고, 마찰하전형정전선별법을 적용하여 재질분리 연구를 수행하였다. 하전특성 연구결과 PMMA재질이 폐자동차 tail lamp의 재질분리에 효과적인 하전물질로 확인되어, PMMA재질을 사용한 cyclone 하전장치를 개발하였다. 본 연구에서 개발된 cyclone 하전장치를 이용한 마찰하전형정전선별 실험결과, 최적 실험조건에서 폐자동차 tail lamp로부터 PMMA 재질의 품위와 회수율이 각각 99.0%와 90.2%인 결과를 얻어, 폐자동차 tail lamp를 재활용 할 수 있는 재질분리 기술을 확립하였다.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.42-47
• /
• 2008

For the purpose of reduction of production cost in the industrial papermaking process, the use of waste paper has been more and more increased as a fibrous raw material, and the closed system of white water became closed more than ever. "Scum" indicates the floated sludge by a flotation during primary wastewater treatment process in paper mills. If the scum is used as the raw material, it could reduce both the raw material and solid waste treatment cost with even small quantity. In this study, the element survey and the toxicity measurement was carried out for recycling scum. A load factor of stock preparation process in paper mills was measured by somerville screen. Physical properties of paper sheet containing the accepted scum from the stock of AOCC or KOCC were evaluated. The result of this study shows that recycling scum has potential to be used in paper making system. It also might be able to reduce the required energy used by the pressing or drainage process, the raw material cost, and solid waste treatment cost due to the recycling of scum.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.45-46
• /
• 2022

Recently, it is necessary to establish an eco-friendly construction system through recycling of waste material management at construction sites. This is required to reflect the times that require a carbon reduction system in construction as part of domestic and overseas carbon dioxide reduction. Therefore, we intend to establish eco-friendly construction management as part of resource recycling and carbon reduction through recycling technology for waste fibers generated at construction sites.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 고분자리싸이클링 심포지엄
• /
• pp.75-84
• /
• 2006

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.119-123
• /
• 2006

• 자원리싸이클링
• /
• 제3권1호
• /
• pp.44-51
• /
• 1994

PETqudds 부위별로 PET, HDPE, PVC, PP와 같은 여러 가지 다른 종류의 플라스틱으로 이루어져 있어 페 PET병의 재활용을 위하여서는 구성 성분별로 분리가 선행되어야 한다. 본 연구에서는 부상침강법에 의한 분리실험을 실시하였다. 수돗물을 사용하여 라벨을 제거한 후 부상침강 분리시키면 94%의 PET 회수율을 얻을 수 있었다. 라벨이 있을 경우에는 PVC와 PET가 침강하고 PP와 HDPE가 부상하므로 완전히 PET를 회수 할 수 없었다. 따라서 라벨을 제거시킨 후 분리를 시키든지 PVC 라벨의 재질을 PP나 PE로 교체하는 방안이 강구되어야 할 것으로 사료된다. 회수한 PET와 HDPE의 각종 물성을 측정하여 원재료와 비교해 본 결과 이들의 재활용이 가능함을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제26권7호
• /
• pp.555-562
• /
• 2013

The new recycling technology for aged aluminum wires in overhead conductor has been carried out. The authors are attempting to develop remanufacturing method for them for more effective way of recycling in stead of its conventional remelting process. The new recycling technology for aged aluminum wire in overhead conductor was composed of four steps in different develop process, destranding process for conductor, surface cleaning process, welding process and drawing process for aluminum wire. This paper investigates the properties during recycle process of aged aluminum wire. The results of microscopic analysis and mechanical properties were discussed to underscore recycling aluminum wire. Various graphs are presented accompanied by discussion about their relevance on the process. In conclusion, we confirmed the possibility of remanufacturing technique by using new process.