• International Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.14-24
• /
• 2023

The materials applied to the aircraft fuselage, parts, and components must be verified by relative authorities in accordance with the procedures set by the airworthiness authority to achieve the aircraft type certification. There are no examples of domestic composite materials which were verified in order to be applied to aircraft structure. In this study, the composite material certification system of NCAMP, an American composite material standard certification organization, was reviewed and used as the fundamentals of the first aerospace composite material certification system in ROK(Fig 2,8). Also updated material certification documents were developed and confirmed by material certification engineers and inspectors. This aerospace composite material qualification system is intended to modernize the material certification system for AAM(Advanced Air Mobility) as well as aircraft and to enhance the understanding of related technicians and inspectors.

• Journal of Aerospace System Engineering
• /
• v.9 no.3
• /
• pp.8-11
• /
• 2015

Since the late 1990's, FAA, NASA and the aerospace industry have worked together to develop the sharing system of the composite material qualification databases which were obtained through the standardized fabrication and testing procedures. The result was what is now known as the AGATE(Advanced General Aviation Transport Experiments) or NCAMP(National Center for Advanced Materials Performance) methodology, a more cost-effective concept that shifts the major responsibility for qualification and testing from the aircraft manufacturer to the material supplier. The properties of composite materials are largely dependent on the testing as well as the raw material properties and the manufacturing process including the process control parameters. Thus it is important in the composite material qualification to comply with the standardized testing procedures. In this paper, I will describe the standardized witness methodologies of certification engineers to reduce the effect of testing variability within the qualification data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.446-451
• /
• 2007

Since the introduction of advanced composite materials for use in aircraft, the material qualification has been a costly burden to the small airframe manufacturer. For each manufacturer, extensive qualification testing has often been performed to develop the base material properties and allowables at operating environmental conditions, regardless of whether this material system had been previously certificated by other manufacturers. In recent years, NASA, industry, and the FAA have worked together to develop a cost-effective method of qualifying composite material systems by the sharing of a central material qualification database. In this paper, the new methodology of composite material qualification is presented and material allowable of 350°F carbon fiber/epoxy composite material produced domestically is determined with this methodology.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.52-59
• /
• 2016

Environmental Qualification has been almost developed except those of Non-Material Sub-components for valves and pumps though the time has only passed about 10years since EQ test launch of Korea. However EQ test has been performed by a few of engineers under the conditions that experience of EQ test is insufficient and EQ system is not developed completely. In recent years, Strengthen Nuclear Safety Regulation is being done Strictly Nuclear safety components Verification Procedure for Non-Material Sub-components, but the reports contain only performance test results, not Enviro nmental test methods relating to real Aging Degradation. In this Study, there were developed to performance systematically research to acquire EQ technology for five specimens of the Non-Material Sub-components in the Nuclear Power Plant.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.71-77
• /
• 2023

Liquid Composite Molding (LCM), an Out of Autoclave (OoA) composite manufacturing process, has big advantages when making large and complex structures of airplanes. Since the importance of LCM process is increasing, FAA has suggested recommended guidance and criteria for the development of material and process specifications for LCM materials and process. The importance of LCM process is also raised by domestic composite material suppliers and OEM. This study suggested structures of material specifications and process specification of LCM materials. Material qualification method for LCM process and material was also developed in this study.

• Journal of Aerospace System Engineering
• /
• v.5 no.1
• /
• pp.17-23
• /
• 2011

Since the time, cost and lack of regulatory information and guidance, one of the largest regulatory obstacles for an airframe manufacturer of polymer based advanced composite materials in certified aircraft applications, is to generate design allowables that will satisfy Airworthiness Regulations. In the past two decades, the design allowables used in military aircraft had been generated and applied in Korea, however the qualification of composite materials used in certifying airframe structure was not accomplished for design and demonstration of compliance to applicable airworthiness regulation. It is the intend of this paper that provide the basis of composite material qualification for small aircraft certification to the airworthiness regulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.969-976
• /
• 2020

Urban Air Mobility is attracting attention as a future innovation industry around the world, and leading industries are considering the application of composite materials for structural robustness and lightening in the designing and manufacturing new concept eVTOL aircraft. To apply composite materials to the new concept of eVTO aircraft, this paper was analyzed about composite material qualification system of FAA & EASA and institutionalized by Korea Government, including the procedures and methods, the organization to carry out the material verification for domestic conditions. The domestic composite material qualification system will not only make it easier for manufacturers of eVTOL aircraft with a new concept to apply composite materials to domestic aircraft through pre-material qualification, but also reduce the burden of material qualification within the period of type certification. In addition, domestic manufacturers of composite materials with qualified material quality and performance will be easy to enter for domestic aircraft applications and composite material manufacturers with experience in applying to aircraft will have a positive impact on overseas exports. This system will be able to promote the development eVTOL aircraft industry of a new concept and enhance international credibility of made aircraft in Korea.

• Journal of Aerospace System Engineering
• /
• v.1 no.2
• /
• pp.13-20
• /
• 2007

Structural qualification plan (SQP) for aerospace vehicle is based on material certification methodology, which must be approved by certification authority. It is internationally required to use of statistically based material allowables to design aerospace vehicles with aerospace materials. In order to comply with this regulation, it is necessary to establish relatively large amount of database, which increases test costs and time. Recently NASA/FAA develop the new methodology which results in cost, time, and risk reduction, and satisfies the regulation at the same time. This paper summarizes the certification methodology of materials system as a part of structural qualification plan (SQP) of aerospace vehicles and also thermal management of the vehicle system, like thermal protection materials system and thermally conductive material system. Materials design allowable was determined using this method for a carbon/epoxy composite material.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2022

UAM (Urban Air Mobility) is a new safe, secure, and more sustainable air transportation system for passengers and cargo in urban environments. Commercial operations of UAM are expected to start in 2025. Since production rates of UAM are expected to be closer to cars than conventional aircraft, the airworthiness methodology for UAM must be prepared for mass production. Composite materials are expected to be mainly used for UAM structures to reduce weight. In this paper, the composite material qualification method was derived and the materials were applied for small aircraft application. It is expected to reduce the airworthiness certification time by applying composite material qualification system and its database.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.193-196
• /
• 2007

We developed and tested the high pressure hydrogen gas cylinder(type4) for fuel cell vehicle. The working pressure is 350bar. We conducted material tests, production tests and design qualification tests on the developed cylinders according to modified NGV2-2000(hydrogen). The high pressure hydrogen gas cylinder met all the design qualification requirements of ANSI/CSA NGV2-2000 and acquired NGV2 certification from independent inspection agency.