• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.364-365
• /
• 2006

Transverse some wave was generated by T type waveguide for single wafer cleaning application T type megasonic waveguide was analyzed by acoustic pressure measurements and particle removal efficiency. Compared to conventional longitudinal waves, not like longitudinal waves, transverse waves showed changes of direction and phase which increased the cleaning efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.121-122
• /
• 2006

Single crystal of $CdIn_2Te_4$ were grown by the Bridgman method without using seed crystals. From photocurrent measurements, its was found that three peaks, A, B, and C, correspond to the instrinsic transition from the valence band states of ${\Gamma}_7$(A), ${\Gamma}_6$(B), and ${\Gamma}_7$(C) to the conducton band states of ${\Gamma}_6$, respectively. Crystal field splitting and spin orbit splitting were found to be at 0.2360 eV and 0.1119 eV, respectively, from found to be photocurrent spectroscopy.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.53-56
• /
• 2008

The commercial parallel plate electrodes system with guard-ring electrode have been widely used for measurement of dielectric constants of solid materials. And the specification of the electrodes system is about 1 % of measurement uncertainty. This measurement uncertainty is only estimated the error come from mechanical measurements such as the area of the electrodes and the gap between the electrodes except the error come from the air gap between the electrodes and dielectric specimen. Because it is impossible to measure the air gap. This study analyze the total measurement uncertainties of the commercial dielectric constant test cell using 3 kinds of Standard Reference Materials. As a results, the total measurement uncertainty is much bigger than 1 % and the most of the uncertainty can be reduced by compensation of the error values evaluated in this study.

• 통합자연과학논문집
• /
• 제12권4호
• /
• pp.101-104
• /
• 2019

A hydrated strontium iron fluoride, Sr₂Fe₂F₁₀(H₂O) has been synthesized and characterized. The material was synthesized through mild hydrothermal reaction using an aqueous CF₃COOH solution. The material exhibits a one-dimensional structure consisting of chains of corner-shared Fe³⁺F₆ octahedra, isolated Fe³⁺F₅(H₂O) octahedra, chains of SrF₁₀ polyhedra and isolated SrF₈ polyhedra, respectively. Magnetic property measurements on Sr₂Fe₂F₁₀(H₂O) reveals an antiferromagnetic order at T_N of ~2.5 K with a Weiss temperature (θ) of -61.51 K.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.364-364
• /
• 2006

The rheological properties of Parmax 1200, a new semi-flexible substituted polyphenylene, were investigated. The reported high stiffness of the material was confirmed. The rheological measurements proved that, despite the very high stiffness of the molecules, Parmax showed shear thinning and that, although the viscosity is very high and the melt is highly elastic, the polymer can be extruded in the melt. A worm-like morphology was detected in AFM and TEM. This morphology could explain the reported mechanical and rheological behaviour. The compatibility with flexible chain polymers (e.g. polycarbonate) could also be explained by the worm-like morphology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.36-39
• /
• 1996

In chemical processes, measurement errors reduce the credibility of information and cause inconsistency in material and energy balances. Because multicomposition flows and temperature measurements make material and energy balances nonlinear equations, data reconciliation becomes a nonlinear constrained optimization problem. In multicomposition processes, if we follow general optimization procedure, the number of measurement variables is so large that data reconciliation requires much computation time. We propose the decomposition procedure to reduce the computation time without the decrease of accuracy of data reconciliation. Decomposition procedure finds global variables, that can reduce the nonlinearity of constraints, and divides two sub-optimization problems. Once we optimize the global variables at upper level, we can easily optimize the remain variables at tower level, We can obtain the short computational time and the same accuracy as SQP optimization method.

• 전자공학회논문지D
• /
• 제35D권5호
• /
• pp.80-86
• /
• 1998

Material characterizations were performed for In$_{0.53}Ga_{0.47}As/In$_{0.52}Al_{0.48}$/As MQWs grown on InP substrates by low-temperature modlecular beam epitaxy. MQW samples were grwon at different temperatures of 200.deg.C, 300.deg. C and 500.deg. C, and doped with 10$^{18}$ cm$^{3}$ Be. High resolution x-ray diffraction measurement showed the change in crystal qualities according to growth temperature. Hall measurement showed the changes in carrier concentrations and mobilities for different growth temperatures. The optical properties of MQW samples were investigated with photoluminescence and fourier-transform infrared spectroscopy measurements.

• 한국연초학회지
• /
• 제19권2호
• /
• pp.159-161
• /
• 1997

A study on the optimal drying condition by a vacuum drying oven was done using shredded tobacco lamina and commercial cigarettes ('This'). Changes in the mass of the experimental material were monitored for about 50 hrs at 6 different temperatures (5$0^{\circ}C$~10$0^{\circ}C$, 1$0^{\circ}C$ stepwise) while continuously operating a vacuum pump. After 30 hrs, small amount of samples from each material were taken sequentially to monitor changes in moisture content using a Karl-Fischer method (Metrohm KF 701 Titrino). Absolute moisture contents calculated from the measurements indicated an ideal data distribution could be obtained by drying at temperatures between 7$0^{\circ}C$~8$0^{\circ}C$. Results from cigarette products which contains humectant and tobacco lamina without it were compared.

• 한국수소및신에너지학회논문집
• /
• 제7권1호
• /
• pp.39-44
• /
• 1996

The discharge capacity of V-Ti-Ni(V-rich) metal hydride electrode during the charge-discharge cycling was investigated in KOH electrolyte. All electrodes were degraded within 25 cycles. To investigate the cause of the degradation phenomena impedance measurements were performed by using E.I.S(electrochemical impedance spectroscopy). The surfaces of the degraded electrodes were examined by Auger electron spectroscopy (AES). It was observed that all electrodes were covered with oxygen from the surface to the bulk, titanium was enriched near surface, and vanadium was dissolved from the surface to the bulk.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.324-326
• /
• 2008

Novel X-shaped molecules containing perfluoroalkyl alkanes as a side chain have been synthesized and characterized. The properties of mesophases were investigated by a combination of differential scanning calorimetry (DSC), polarizing optical microscopy (POM), X-ray diffractometry (XRD) and electro-optical measurements.