• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.33-38
• /
• 2022

Planner configuration thin film solar cells (TFSCs) with SnS/CdS heterojunction performed a lower short-circuit current (J_SC). In this study, we have demonstrated a path to overcome deficiency in J_SC by the incorporation of Se in the SnS absorber. We carried out the incorporation of Se in VTD grown SnS absorber by rapid thermal annealing (RTA). The diffusion of Se is mostly governed by RTA temperature (T_RTA), also it is observed that film structure changes from cube-like to plate-like structure with T_RTA. The maximum J_SC of 23.1 mA cm^-2 was observed for 400℃ with an open-circuit voltage (V_OC) of 0.140 V for the same temperature. The highest performance of 2.21% with J_SC of 18.6 mA cm^-2, V_OC of 0.290 V, and fill factor (FF) of 40.9% is observed for a T_RTA of 300℃. In the end, we compare the device performance of Se- incorporated SnS absorber with pristine SnS absorber material, increment in J_SC is approximately 80% while a loss in V_OC of about 20% has been observed.

• Elastomers and Composites
• /
• v.58 no.1
• /
• pp.32-43
• /
• 2023

The worldwide use of polyurethane foam products generates large amounts of waste, which in turn has detrimental effects on the surroundings. Hence, finding an economical and environmentally friendly way to dispose of or recycle foam waste is an utmost priority for researchers to overcome this problem. In that sense, the glycolysis of waste flexible polyurethane foam (WFPF) from automotive seat cushions using different industrial-grade glycols and potassium hydroxide as a catalyst to produce recovered polyol was investigated. The effect of different molecular weight polyols, catalyst concentration, and material ratio (PU foam: Glycols) on the reaction conversion and viscosity of the recovered polyols was determined. The obtained recovered polyols are obtained as single or split-phase reaction products. Besides, the foaming characteristics and physical properties such as cell morphology, thermal stability, and compressive stress-strain nature of the regenerated flexible foams based on the recovered polyols were discussed. It was observed that the regenerated flexible foams displayed good seating comfort properties as a function of hardness, sag factor, and hysteresis loss compared to the reference virgin foam. With the growing demand for a sustainable and circular economy, a global valorization of glycolysis products from polyurethane scraps can be realized by transforming them into profitable substances.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.341-345
• /
• 2003

ZnWO$_4$shows excellent frequency selectivity due to its high quality factor(Q${\times}$f) at microwave frequencies. However, in order to use ZnWO$_4$as multilayered wireless communication components, its other properties such as sintering temperature(105$0^{\circ}C$). $$\tau$_f$(-70ppm/$^{\circ}C$) and $$\varepsilon$_r$(15.5) should be modified. In present study, TiO$_2$and LiF were used to improve the microwave dielectric and sintering properties of ZnWO$_4$. TiO$_2$ additions to ZnWO$_4$changed $\tau$$_{f}$ from negative to positive value, and also increased $$\varepsilon$_r$, due to its high $$\tau$_f$(＋400ppm$^{\circ}C$) and $$\varepsilon$_r$(100). At 20 mol% TiO$_2$ addition, $$\tau$_f$was controlled to near zero ppm/$^{\circ}C$ with $$\varepsilon$_r$=19.4 and Q${\times}$ f=50000GHz. However, the sintering temperature was 110$0^{\circ}C$. LiF addition to the ZnWO$_4$＋TiO$_2$ mixture greatly reduced the sintering temperature from 110$0^{\circ}C$ to 85$0^{\circ}C$ due to liquid phase formation. Also LiF addition decreased the $$\tau$_f$value due to its high negative $$\tau$_f$ value. Therefore, by controlling the TiO$_2$and LiF amount. temperature stable LTCC(Low Temperature Cofired Ceramics) material with low loss in the ZnWO$_4$-TiO$_2$-LiF system could be fabricated.d.d.

• Journal of Life Science
• /
• v.28 no.5
• /
• pp.532-539
• /
• 2018

Hair graying is processed by loss of melanin production caused by the decrease of activity and number of melanocyte and the accumulation of hydrogen peroxide ($H_2O_2$) in the hair follicle with increase of age. The purpose of this study was to investigate the effect the Black oryzasativa ethanolic extract (BLEE) on the melanin production. In this study BLEE at $8{\mu}g/ml$ or more showed a significant 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging activity and reduction power. BLEE at $16{\mu}g/ml$ or more showed promoted tyrosinase activity and melanin production. In addition BLEE scavenged intracellular $H_2O_2$ in 2',7'-dichlorodihydrofluorescein (DCF) fluorescence assay in B16F1 cells. However, Western blot analyses displayed that BLEE decreased the expression level of catalase, but no effect on the expression level of tyrosinase, tyrosinase associated protein-1 (TRP-1), tyrosinase associated protein-2 (TRP-2) and microphthalmia-associated transcription factor (MITF) transcription factor involved in melanogenesis. Thus, the promotive effect of BLEE on melanin production is attributed to the increase of tyrosinase activity and the reduction of intracellular $H_2O_2$ level. In conclusion, BLEE played a key role in in promoting melanin production, which suggests that the BLEE could be applied as a potential functional material in the development of hair care cosmetics related to the promotion of melanin production for the growth of black hair.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2021

In this study, we investigated the necessary mechanical properties of conductive multifilament yarns for fabricating the electrodes of biosignal measurement pressure and stretch textile sensors using embroidery. When electrodes and circuits for smart wearable products are produced through the embroidery process using conductive multifilament yarns, unnecessary material loss is minimized, and complex electrode shapes or circuit designs can be produced without additional processes using a computer embroidering machine. However, because ordinary missionary threads cannot overcome the stress in the embroidery process and yarn cutting occurs, herein, we analyzed the S-S curve, thickness, and twist structure, which are three types of silver-coated multifilament yarns, and measured the stress in the thread of the embroidery simultaneously. Thus, the required mechanical properties of the yarns in the embroidery process were analyzed. In the actual sample production, cutting occurred in silver-coated multifilament rather than silver-coated polyamide/polyester, which showed the lowest S-S curve. In the embroidery process, the twist was unwound through repetitive vertical movement. Further, we fabricated a piezoresistive pressure/tension sensor to measure gauge factor, which is an index for measuring biological signals. We confirmed that the sensor can be applied to the fabrication of embroidery electrodes, which is an important process in the mass production of smart wearable products.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.369-374
• /
• 2015

In this paper, an EM sensing based prestressing force estimation method is proposed, in which it can estimate tensile force of PS tendon for PSC girder. The PSC girder has more improved performance than the general concrete girder by introducing the prestressing to the concrete. Thus the PSC girder bridge is widely constructed due to its high performance and low cost. However, the prestressing force has not been managed nevertheless it is major factor for the maintenance of the PSC girder bridge. The prestressing force was just measured during construction using jacking device and after that, it can not be managed. For this reason, this paper proposes a tensile force estimation method of PS tendon based on EM sensor. The permeability of ferroelectric material is changed according to the induced stress to the material, in which it can be measured using EM sensor. To measure the permeability of PS tendon, the EM sensor was fabricated and verified by performing the MTS test. The test was performed using 7-wire steel tendon under the 0, 40, 80, 120, 160, 200 KN of tensile force. The permeability of PS tendon was gradually decreased according to the increasement of tensile force. The regression method was used to find the relation between permeability and stress. As a result, the permeability has linear relation with the tensile force of PS tendon and the pre-stressing force can be estimated by the derived estimation equation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.2
• /
• pp.268-280
• /
• 1994

Tissue conditioners have been used for treatment of denture stomatitis caused by wearing of dentures. Early studies pointed out Candide albicans (C. albicans) as main etiologic factor, and antifugal agents were added for control of the species. But there is a little information about broad comparison on the effect of tissue conditioners and antifungal agents added. The purpose of the present study was to compare the inhibiting effect of four tissue conditioners and one temporary soft liner on the growth of C. albicans for treatment of denture stomatitis using gel diffusion method by measuring diameter of the zone of growth inhibition. Three antifungal agents were added to each material for evaluation of the effect of added agents. Finally, observation was made to evaluate the effect of the loss of antifungal elements by aging of the specimen. The results of this study were obtained as follows : 1. Tempo had remarkable antifungal effect showing the zone of growth inhibition as 2.35 mm at 1st day, and was most effective on End: 4th and 7th day from incubation (p<0.05). But Coecomfort, Dura conditioner, Visco-gel, Coe-soft had little antifungal effect from the 1st day of incubation. 2. Nystatin was most effective showing 9.60-12.04 mm of zone of inhibition at the 1st day from incubation. The antifungal properties were reduced to amphotericin B, chlorhexidine and materials without agent (p<0.05), and the effect was diminished by time. 3. As pretreatment with amphotericin B, nystatin, chlorhexidine, Tempo was very effective at the 1st day from incubation showing zone of inhibition as 3.65, 12.04, 4.78 mm with addition of each agent. Dura conditioner had strongest antifungal effect at the next day as 2.86, 5.33, 1.29 mm of zone of inhibition, and yielding results of Coe-comfort, Tempo, Coe-soft was shown at 4th and 7th day from incubation (p<0.05). Taken all together, tissue conditioners have little antifungal effect except Tempo. Formation of the zone of growth inhibition was due to agents amphotericin B, nystatin, chlorhexidine and nystatin was most effective. Conclusively, it is advisable to select material which is effective on the growth of C. albican and consider addition of antifungal agents for treatment of denture stomatitis.

• Journal of Science and Technology Studies
• /
• v.7 no.1
• /
• pp.67-90
• /
• 2007

Could STS throw another-colored light on the Hwang's Affair, the scientific fraud committed by Hwang Woo-Suk and his research team in Korea? And could analytic tools of STS unfold another meanings which have been overlooked in most of the traditionally social-sciences-oriented analyses? In this essay, I try to answer these questions by analyzing the Hwang's Affair in the view of STS, especially by using some concepts of actor-network theory(ANT): movement, translation and displacement. I want to say that the Hwang's Affair seems to be a part of normal scientific activity, not an abnormal phenomenon, and as an evidence, focus on the similarities of their life styles between "pure/real scientist" Louis Pasteur and "impure/political scientist" Hwang Woo-Suk. I try to mobilize some concepts of ANT, especially movement, and find out why scientists came to move toward the opposed direction on the pure/real-impure/political line. I suggest that there exists "laboratory politics" as the key factor in this bifurcation. My tentative conclusion is that Pasteur can take a position to make his great world, so-called the Pasteurian world, owing to the success of "double movement" in which he treated his laboratory as a fulcrum to lift up the world, but Hwang degrades himself to "ugly scientific politician" due to the loss of the momentum of his movement; Hwang treated his laboratory only as the symbolic resources and in turn failed to solidify material entities, his real political resources, even though he knew the importance of laboratory.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.14-17
• /
• 2014

In this study, lead-free Piezoelectric $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ ceramics were fabricated using mixed oxide method and the effects of various sintering temperature on the structural and electrical properties were investigated. For the $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ (NKN-SCT-$MnO_2$) ceramics sintered at temperatures of $1,025{\sim}1,100^{\circ}C$. The results indicated that all specimens were perovskite single phase formation without any second phase. It has been shown that relative density is increased to increasing sintering temperature. When the sintered temperature at $1,075^{\circ}C$, highest sintered density and maximum value of $4.45g/cm^3$. Average grain size is increased to increasing sintering temperature. The electromechanical coupling factor, dielectric constant, dielectric loss, d33 and curie temperature at the sintering temperature $1,075^{\circ}C$ of NKN-SCT-$MnO_2$ specimens were 0.22, 511, 0.033, 103 and $380^{\circ}C$, respectively.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.2
• /
• pp.31-55
• /
• 1986

Generally, the development of shipping is characterized by the amount of traffic flow (traffic volume) and seaborne cargo in the sea. Movement of ships is an essential element of constructing the traffic flow which is represented the dynamic movement of ships in the sea, but on the other band the numbers of arriving and departing the port is the basic factor consisting of the static movement of ships. The amount of cargoes by coastal vessels and ocean trade vessels have increased tremendously with the great growth of the Korean economy these days. This increase of the seaborne cargoes has made the Korean coastal traffic flow so congested that this can be a cause of large pollution as well as great marine casualities such as a loss of human lives and properties . And also the future coastal traffic is expected to increase considerably according to our economic development and high dependence upon foreign trade. Under the circumstance, to devise the safety of coastal traffic flow and to take a proper step of a efficient navigation, there is a necessity for analyzing and surveying the coastal traffic trend and the characteristics of cargo movement. In order to grasp the dynamic movement of ships in the Korean coast, O/D analysis is executed. This paper aims to secure the basic data necessary for a comprehensive plan and estimation of vessel traffic management system for the enhancement of safety, order and efficiency of vessel traffic in the Korean coast. The analyzed results of the traffic flow and seaborne cargoes of the Korean coast are summarized as follows : 1) The congestion by the vessels occurred around the ports such as-in proportion of ship's number (proportion of tonnage) -Incheon 18.5%(14.8%), Pohang 5.9% (9.9%), Samil 5.2%(8.3%), Mokpo 8.6%(0.8%), Pusan 13.5%(36.4%), Ulsan 9.1%(16.2%). 2) It is found that the area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed thatthe area adjacent to Incheon, Pusan, Ulsan, Channel of Hanryu and South-western area are heavily congested. 3) It is confirmed that the coastal vessels are main elements constituting the coastal traffic and that there are much traffic flow among five ports as following through the precise O/D analysis of ship's coastal movement. Incheon-Samil, Ulsan, Pusan, Jeju Pusan -Samil, Ulsan, Incheon, Jeju Pohang -Samil, Inchoen, Jeju Pohang -Samil, Incheon, Jeju Ulsan -Samil, Incheon, Jeju Samil -Ulsan, Pusan, Incheon 4) The amount of cargoes to abroad are in proportion about 81% of total and the amount of coastal cargoes are about 19%. Of those, cargoes in and out to Japan are about 26% and to South-east Asia are about 27%. 5) The chief items of foreign cargoes are oil(38.33%), iron ore(13.98%), bituminoous coal(12.74%), grain(8.02%), lumber(6.45%) in the import cargoes and steel material(21.96%), cement(17.16%), oil(6.81%), fertilizer(3.80%) in the export cargoes. 6) The 80.5% of total export cargoes and 92.4% of total import cargoes are flowed in five main ports. 7) The chief items of coastal cargoes are oil (42.45%), cement(16.86%), steel material (6.49%), anthracite(6.31%), mineral product(4.3%), grain, and fertilizer. Almost 92.24% of total import and export oil cargoes in Korea is loaded and unloaded at the port of Samil & Ulsan.