• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1006-1008
• /
• 2000

In this material, a traction motor for light railway vehicle was developed. Aluminium -Diecasting process was selected in order to reduce the manufacturing cost of making rotor bars and rotor rings of the motor, instead of copper or copper alloy rotor bars and rotor rings. And the results of experiment satisfied the international standard IEC 349-2.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.127-129
• /
• 2002

A new type of fiber-reinforced polymeric materials for the main body and the arc chamber of the low-voltage circuit breakers was developed. The tensile and the flectional strength of the three kinds of thermoplastic resins for the cover of MCCBs(Molded case circuit breakers) increase much higher than those made of BMC that has been used. In a high current-breaking test, an experimental MCCB with the new insulating material showed no-cracks on the bodies.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2008년도 춘계학술발표대회 개요집
• /
• pp.17-17
• /
• 2008

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.549-552
• /
• 2008

We have developed a novel bipolar host material with both electron and hole transporting characteristics. Since CGH(Cheil Green Host) has some electron transporting characteristics, it shows increased luminance efficiency in device including TCTA and without HBL(hole blocking layer:BAlq). Maximum power efficency of CGH was 27.4lm/W at the device structure ITO/DNTPD(60)/NPB(20)/TCTA(10)/EML(30)/Alq3(20)/LIF(1)/Al. We measured device performance again without HBL. The result of CGH showing 26.0lm/W is outstanding compared to that of CBP showing 19.1lm/W without holeblocking layer. We also measured lifetime and found to be 205hr at 3000nit, that is significant result compared to the life time of CBP device showing 82hr. CGH shows high device performance with holeblocking layer. Moreover, it shows better device performance and life time than those of CBP without holeblocking.

• 한국전기전자재료학회논문지
• /
• 제30권10호
• /
• pp.677-682
• /
• 2017

Lamination is used extensively in various industries. The type of lamination applied to the material depends on the precision level required, which varies for materials needed for everyday use, materials used in high-tech industries, and processes employed to fabricate finished products. Especially in hot lamination, the distribution of the surface temperature of the heating roller is very important to avoid the generation of internal bubbles and ensure flatness of the attached materials, and thus maintain a good standard of quality and productivity. In this study, we have developed a system to monitor the surface temperature of the heating rollerby applying a heterogeneous controller and a non - contact temperature sensor. This monitoring system accurately measures the surface temperature of the heating roller and applies the RS485 MODBUS communication method for easy expansion. Using this system, a laminated prototype was fabricated, and its efficacy for non-contact temperature sensor calibration, Ethernet IP communication, stoppage of the heating roller, and determination of temperature distribution with rotation was examined for its potential usage in industries.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.154-160
• /
• 2004

The Sulfide Stress Corrosion Cracking (SSCC) resistance of structural steels is one of the critical concerns for the operators, material designers, and fabricators of oil-field equipment, especially treating sour gas (H2S) containing fluids. As far as its fabricators concerned, the systematic care of welding parameters should be taken to obtain comparable SSCC resistance of their weldment to that of its base material. In this respect, every different type of welding joint design for this use should be verified to be SSCC-proof with relevant test procedures. In this study, the welding parameters to secure a proper SSCC resistance of steel pipe's weldments were reviewed on the Welding Procedure Qualification Records (WPQR), which had been employed for actual fabrication of an offshore structure for oil and gas production. Based on this review, a guideline of welding parameters, such as, heat input, welding consumable for Y.S. 65 ksi class steel pipe material is proposed in terms of the NACE criteria for SSCC resistance.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.211-215
• /
• 2005

The binary Al-Mg alloys are the basis for the 5000 series of non-heat-treatable aluminum alloys. In general, 5000 series of aluminum alleys have a high strength, good welding characteristics and a high resistance to corrosion, especially under the seawater. Thus the aluminum alloys are adopted in the hull material of hovercraft that is required light in weight as well as high strength. It is very important that the weldability problem of these alloys caused by high thermal conductivities welding deformation, porosity and so on. in this study, auto-welding equipment was applied for aluminum welding automation. Also, optimal welding data were studied by investigating welding characteristics for various shapes of weldment to use Al 5083 that is representative structural materials of the 5000 series of aluminum alloys.

• Journal of Nutrition and Health
• /
• 제39권4호
• /
• pp.366-371
• /
• 2006

참가사리의 항산화효과를 측정하기 위해 ROS와 RNS 제거활성을 측정하였다. ROS 제거활성 측정결과 GTMM층과 GTMB층이 positive control로 사용한 trolox와 유사한 높은 제거능을 보였고, $ONOO^-$ 제거능은 그 효과가 미약하였으나 GTMM 층에서 나타났으며 NO 제거활성 역서 GTMM층과 GTMB층에서 약한 효과가 관찰되었다. 따라서 본 실험의 결과 GTMM 층에서 ROS 제거 활성의 효과가 높았으며 다음으로 GTMB층에서 효과를 보여 GTMM층과 GTMB층에 활성산소 제거효과를 가지는 물질이 있는 것으로 사료되어진다. Paper disc method를 이용한 항균활성 효과 실험결과, Serratia marcescens가 모든 층에서 높은 항균력을 보였으며 Proteus mirabilis에서도 GTMA층을 제외한 모든 층에서 항균효과를 보였다. 사용한 모든 균주에서 각각 항균력의 차이는 있으나 전체적으로 GTMB 층과 GTMM 층에서 높은 항균활성을 관찰할 수 있었다. 이 연구결과를 토대로 참가사리의 항산화 및 항균활성물질에 대한 단계적인 분리 동정이 이루어져 GTMM 층과 GTMB 층의 생리활성물질 개발이 기대되는 바이다.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.43-47
• /
• 2008

Micro Electrochemical Machining(Micro ECM) has traditionally been used in highly specialized fields such as those of the aerospace and defense industries. It is now increasingly being applied in other industries where parts with difficult-to-cut material, complex geometry and tribology such as compute. hard disk drive(HDD) are required. Pulse Electrochemical Micro-machining provides an economical and effective method for machining high strength, high tension, heat-resistant materials into complex shapes such as turbine blades of titanium and aluminum alloys. Usually aluminum alloys are used bearings to hard disk drive in computer. In order to apply aluminum alloys to bearing used in hard disk drive, this paper presents the characteristics of Micro ECM for aluminum alloy.

• 소성∙가공
• /
• 제8권3호
• /
• pp.289-289
• /
• 1999

This paper describes the investment casting of TiAl alloys. The effects of mold material and mold preheating temperature for the investment casting of TiAl on metal-mold interfacial reaction were investigated by means of optical micrography, hardness profiles and an electron probe microanalyzer. The mold materials examined were colloidal silica bonded ZrO₂, ZrSiO₄, A1₂O₃and CaO stabilized ZrO₂. When compared with conventional titanium a1loy, the high aluminum concentration of TiAl alloys helps to lower their reactivity in the molten state. The A1₂O₃mold is a promising mold material for the investment casting of TiAl in terms of the thermal stability, formability and cost. Special attention need to be paid to thermal stability and mold preheating when developing the investment calling of TiAl alloys.