• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.277-288
• /
• 1995

Prediction of turbidity due to fine-grained bed material load under wave action is critical to any assessment of anthropogenic impart on the coastal or lacustrine environment Waves tend to loosen mud deposits and generate steep suspension concentration gradients, such that the sediment load near the bottom is typically orders of magnitude higher than that near the surface. In a physically realistic but simplified manner, a simple mass conservation principle has been used to simulate the evolution of fine sediment concentration profiles and corresponding erodible bed depths under progressive, nonbreaking wave action over mud deposits. Prior field observations support the simulated trends. which reveal the genesis of a near-bed. high concentration fluidized mud layer coupled with very low surficial sediment concentrations. It is concluded that estimation of the depth of bottom erosion requires an understanding of mud dynamics and competent in situ sediment concentration profiling. Measurement of sediment concentration at the surface alone, without regard to the near-bed zone, can lead to gross underestimation of the erodible bed depth.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.3
• /
• pp.175-194
• /
• 1979

The soil organic matter contents in arable land are generally low in Korea. Thus it is generally agreed that the application of organic materials to soils would be much beneficial. Present paper is a review on the effectiveness of organic mat ter application in uplands and lowlands. 1. The effect of organic matter application in uplands are of more clear and simple to explain as compared to that in lowlands. In uplands, appropriate application of organic matters such as compost and various crops residues improves the physical properties of soils leasing to increased water holding capacity, better aeration, and decrease in soil erosion. 2. In lowland, rice soils under water logged conditions the effect of organic matter application on rice yield is not straight borward and demands more refined knowledges for the interpretation of it. 3. It is found that the application of compost in rice soils is more effective when nitrogen fertilizer application is limited it dicating that nitrogen contained in the organic maerials can become available to rice plant and plays an important role for increased yield of rice under the condition where nitrogen fertilizer supply is limited. 4. Application of organic matter does not always bring about the desirable effects. Very often the organic matter application results in more intensive soil reduction leading to the accumulation of harmful substances which would can cancel out the positive effects of organic matter. This is partiunlarly true in poorly drained soils. 5. Rice straw or compost, when applied rice soils, supply sizeable amounts of available silicate to rice plant resulting in yield increase. 6. Although the effectiveness of organic matter application on rice yield in short term experiments is not consistent due to many reasons, the long term effect of organic matter is significant. 7. The term of the $O.M/SiO_2$ ratio in rice soils can serve as a criterion for the judgement of whether organic matter or silicate fertilizer is needed to be applied in a certain soil.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.3
• /
• pp.32-37
• /
• 1999

There is a need to suggest the standards of selection on the cuttings, because the selection of the willow(Salix) cuttings is very important, which will be used as the bioengineering revegetation material to protect the slope by strengthening soil and preventing soil erosion under the bad site conditions. In this study, we measured the lengths and the diameters of original willow cuttings, the total numbers and the lengths of the new shoots and roots after 15 months since the experimental construction of the slope revegetation technology of biological engineering was conducted, and analyzed the correlation between the lengths and the diameters of willow cuttings and the lengths of new roots using the SPSS program. The results are as follows; First, the lower the elevation of tested slope was, the more the number of new shoots and the average lengths of new roots increased. Secondly, the ratio of underground parts and aboveground parts was 4.24 ~ 5.93 proving the fact that the willow(Salix) is one of the species deep rooted with developed underground parts. Thirdly, there is a strong correlation between the diameters of willow cuttings and the total lengths of new roots, whereas, there is no correlation between the lengths of willow cuttings and the total lengths of new roots. In conclusion, it is more efficient for the early rapid revegetation and slope stabilization to select willow cuttings with the biggest possible diameters than with the longest lengths as the slope revegetation materials of biological engineering.

• Corrosion Science and Technology
• /
• v.11 no.6
• /
• pp.263-269
• /
• 2012

Copper alloys are commonly applied to ship's propellers, pumps and valves which are serviced in seawater due to their good castability and corrosion resistance. In the environment of high flow velocity, however, erosion damage predominates over corrosion damage. In particular, the cavitation in seawater environment accelerates surface damage to copper alloys, resulting in degradation of products and economic losses and also threatening safety. The surface was coated with WC-27NiCr by high velocity oxygen fuel(HVOF) spraying technique to attain durability and cavitation resistance of copper alloys under high velocity/pressure flow. The cavitation test was performed for the WC-27NiCr coating deposited by HVOF in seawater at the amplitude of $30{\mu}m$ with seawater temperature. The cavitation at $15^{\circ}C$ caused exfoliation of the coating layer in 17.5 hours while that of $25^{\circ}C$ caused the exfoliation in 12.5 hours. When the temperature of seawater was elevated to $25^{\circ}C$ from $15^{\circ}C$, more damage was induced by over 160%. Although WC-27NiCr has good durability, corrosion resistance and eletrochemical stability, the cavitation damage rate of the coating layer could remarkably increase at the elevated temperatures under cavitation environments.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.155-165
• /
• 2013

Recently, geotextile tube method can be widely applied to the river, costal and marine in the construction field, such as embankment, groin, breakwater, dyke structures and so on, in advanced countries of the world. And that has been constructed at the temporary road for incheon, ilsan-bridge construction and coast erosion protection in republic of korea. Geotextile tube is a tube shaped geotextile product and hydraulic pumping filled with dredged soils. In this paper, the numerical analysis was performed to investigate the behavior of geotextile tube with various properties of material character, shape condition, construction pressure and so on. Also, the field test was conducted in order to identify the construction ability of Samangum waterproof embankment using geotextile tube. According to the applied of field test, geotextile tube was 65 m long and 4.0 m diameter. Also, the permeability coefficient and ultimate tensile strength of geotextile tube is $1.6{\times}10^{-1}$ cm/sec and 205.26 kN/m, respectively. As a result of filed test, when filled, geotextile tube does not attain the same as its unfilled theoretical diameter, but may reach approximately of 55 percent of the theoretical diameter. At the time, geotextile tubes were 12.56 m in circumference and filled to a height of about 2.2 m. This paper presents case study on field application and behavior analysis of the saemangum waterproof embankment donggin 1 division construction using geotextile tube.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.193-198
• /
• 2010

In solid propellant rocket motors, $Al_2O_3$, one of combustion products, can be accumulated inside a combustion chamber. A special rocket motor was designed and tested to simulate thermal reaction of rubber insulator affected by the deposited slag. We successfully demonstrated through a dynamic radioscopy that the slag was deposited at the location as designed. In this paper we present a new test method which can simulate a high temperature and pressure environment in combustion chamber to evaluate material characteristics of rubber insulator and can provide design data to decide its thickness for a new solid rocket motor. The solid rocket motor, which has an average chamber pressure of 770 psia and a burning time of 50 seconds, was tested. The results show that erosion of EPDM insulator is more affected by a gas velocity rather than by the thermal reaction of slag with a high thermal capacity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.484-492
• /
• 2013

With the industrial acceleration in a lot of countries of the world, the demand for anti-corrosion and anti-abrasion material increases continuously. Particularly, stainless steel with the fine surface and excellent corrosion resistance is widely used in various industrial fields including ship, offshore structures tidal power plant, and etc. In marine environment, however, it is easy to generate by the corrosion damage by $Cl^-$ ion and cavitation damage due to high rotation speed on stainless steel. Therefore, in this research, the cavitation erosion-corrosion test (Hybrid test) was performed for 304 stainless steel specimen used in the high flow rate seawater environment. And the cavitation damage behavior in the corrosive environment was analyzed overall. The high hardness was shown due to the formation of compressive residual stress by the water cavitation peening effect in cavitation condition. However, high current density in the potentiodynamic polarization experiment presented with the breakdown of the passive film caused by physical impact. Therefore, both electrochemical characteristics and mechanical properties must be taken into account to improve the cavitation resistance in seawater.

• Plant Journal
• /
• v.14 no.2
• /
• pp.33-38
• /
• 2018

The CFB boilers technology is facing a number of challenges. Among them, boiler tube erosion, sintering by bed inventory overheating and high self consumed service power are major ones. This study was conducted to obtain allowable bed inventory with the Yeosu Power Plant, a 300 MW class CFB boiler. For the test, bed pressure was reduced from design pressure of 4.5 KPa to 2.5 KPa by reducing bed inventory, at fixed turbine output, coal consumption rate and air flow. Consequently, reducing the lower bed inventory is effective to decrease bed temperature but excessive reducing might increase bed temperature due to lack of circulating fluidized materials. Also, in case of the Yeosu Plant boiler using subbituminous coal as its primary fuel, its bed temperature change is highly affected by not only the amount of bed inventory, but also the boiler capacity and coal contents.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1135-1140
• /
• 2012

An electrochromatographic microchip with carboxyl-group-derivatized mono-disperse silica packing was prepared from the corresponding colloidal silica solution by utilizing capillary action and self-assembly behavior. The silica beads in water were primed by the capillary action toward the ends of cross-patterned microchannel on a cyclic olefinic copolymer (COC) substrate. Slow evaporation of water at the front of packing promoted the self-assembled packing of the beads. After thermally binding a cover plate on the chip substrate, reservoirs for sample solutions were fabricated at the ends of the microchannel. The packing at the entrances of the microchannel was silver coated to fix utilizing an electroless silver-plating technique to prevent the erosion of the packed structure caused by the sudden switching of a high voltage DC power source. The electrochromatographic behavior of the microchip was explored and compared to that of the microchip with bare silica packing in basic borate buffer. Electrophoretic migration of Rhodamine B was dominant in the microchip with the carboxyl-derivatized silica packing that resulted in a migration approximated twice as fast, while the reversible adsorption was dominant in the bare silica-packed microchip. Not only the faster migration rates of the negatively charged FITC-derivatives of amino acids but also the different migration due to the charge interaction at the packing surface were observed. The electrochromatographic characteristics were studied in detail and compared with those of the bare silica packed microchip in terms of the packing material, the separation potential, pH of the running buffer, and also the separation channel length.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.215-223
• /
• 2020

The objective of this study is to develop a prediction model of specific degradation using data mining classification especially for the rivers in South Korea river. A number of critical predictors such as erosion and sediment transport were extracted for the prediction model considering watershed morphometric characteristics, rainfall, land cover, land use, and bed material. The suggested model includes the elevations at the mid relative area of the hypsometric curve of watershed morphomeric characteristics, the urbanization ratio, and the wetland and water ratio of land cover factors as the condition factors. The proposed model describes well the measured specific degradation of the rivers in South Korea. In addition, the development model was compared with the existing models, since the existing models based on different conditions and purposes show low predictability, they have a limit about the application of Korean River. Therefore, this study is focusing on improving the applicability of the existing model