• Clean Technology
• /
• v.16 no.4
• /
• pp.284-291
• /
• 2010

Nitrous oxide ($N_2O$) is a greenhouse material which is hard to remove. Even with a catalytic process it requires a reaction temperature, at least, higher than 670 K. This study has been performed to see the effects of Ce addition to the mixed oxide catalyst which shows the highest activity in decomposing $N_2O$ completely at temperature as low as 473 K when CO is used as a reducing agent. Mixed metal oxide(MMO) catalyst was made through co-precipitation process with small amount of Ce added to the base components of Co, Al and Rh or Pd. Consequently, the surface area of the catalyst decreased with the contents of Ce, and the catalytic activity of direct decomposition of $N_2O$ also decreased. However, in the presence of CO, the activity was found high enough to compensate the portion of activity decrease by Ce addition, so that it can be ascertained that the catalytic activity and stability can be maintained in the CO involved $N_2O$ reduction system when Ce is added for the physical stability of the catalyst.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.50-50
• /
• 2022

Recently, the use of mulching film has increased in soybean cultivation. Polyethylene (PE) films and biodegradable films (BF) have the advantages of improving soil moisture retention, geothermal maintenance, and CO2 maintenance as well providing weed control. Furthermore, BFs are a material that can compensate for the shortcomings of PE because it has the ability to decompose naturally by soil microorganisms, sunlight, and geothermal heat. Many researches have been carrying out studies regarding the development of BFs for these very reasons. This study was conducted better understand which films are optimal for soybean cultivation after evaluations of soybean growth and film characteristics of various BFs. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung), two unnamed biodegradable films (Seojin Bio and Taesung), and a PE film were used in this study. For the control plots, no mulching was used. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered with either BFs or PE films. After 1 week, soybean (cv. Daechan) seeds were seeded. Germination rate and plant height were measured at weekly intervals after seeding. In addition, pH, EC, and decomposition and light transmittance levels of films were measured during the experimental period. Daily average temperatures and relative humidity in soils was measured during the experimental period. There was no significant difference in germination rates and plant height in both crops grown with BFs and PE films, but crops grown in the control plot had significantly lower germination rates and growth. Soil pH was not significantly different regardless of treatments (BF, PE, and non-mulching) at 14, 28, and 42 days after seeding. In general, the EC contents in the control plots was lower than in crops grown using BFs and PE films. With the exception of some BFs, light transmittance and decomposition levels of films did not, in general, increase up to 70 days after soybean seeding. Since this study is ongoing, we are continually investigating these parameters. The average daily moisture in soil was higher in crops grown with BFs and PE films than in the control plot. However, the daily average soil temperature was not consistent regardless of treatments. Therefore, the BFs used in this study can be used without negative impacts on soybean growth.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.145-151
• /
• 2009

This study aims to evaluate CT (Computed Tomography) characteristics through the estimation of HU (Hounsfield Unit) and the corresponding variations using coefficient of variation values for various materials as a function of physical factor. HU values for various materials with varying densities as a function of physical factor were measured using MDCT (Siemens SOMATOM Sensation 4, Germany). The results showed that the HU values were decreased and increased as a function of kVp and material density, respectively. Especially, the HU values for bone and iodine at 140 kVp were 32% and 42% smaller than those at 80 kVp, respectively. In case of iodine, the HU values also decreased and increased as a function of kVp and concentration, respectively. While the HU values were fixed as a function of mAs. The decreased ratio of HU values between 80 keV and 140 keV was different at various concentration and maximum difference was shown as 1.73 at 3% concentration. These results indicated that it may be possible to separate composition of materials, e.g. iodine and bone, using single source CT. The results showed that dual energy techniques using single source CT can be applied to material separation and expand CT imaging techniques to other practical applications.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.390-396
• /
• 2008

The hyaluronic acid (HA) polymers cross-linked with lactide (LA) using the crosslinking agent, 1,3-butadiene diepoxide (BD), were prepared in order to develop a biomedical material for tissue engineering. The degree of lactide and BD reaction of the crosslinked polymer was determined by the analysis of nuclear magnetic resonance spectroscopy. Both degree of reaction and swelling ratio increased with BD concentration or LA/HA mole ratio. Tensile modulus decreased with increasing BD concentration or decreasing LA/HA mole ratio. Degradation was shown to be progressed at two different stages and became slow with increasing BD concentration. It was shown that the first stage degradation was mainly due to the decomposition of ester linkage in the crosslinked structure. The cell growth inhibition increased with BD concentration. Although cytotoxicity was slightly observed in the high BD concentration, the value was very low (below 6%) enough not to affect the cell growth.

• Clean Technology
• /
• v.8 no.4
• /
• pp.173-180
• /
• 2002

As a primary material for MLCC, $BaTiO_3$ particles coated with two additives in a core-shell structure were prepared in this study. This composite powder can not only reduce the VOC emission during MLCC manufacture but also increase the density and reliability of electronic products. The additives were $Y_2O_3$ and $MnCO_3$, whose composition information was obtained from domestic companies. It was observed that the surface of $BaTiO_3$ particles was uniformly as well as simultaneously coated by those two materials via urea-decomposition reaction over $70^{\circ}C$ as the reaction temperature. Elemental analysis indicated that the measured content of each additve was quite close to the designated value. The effect of polymeric dispersant such as PVP, on the coating characteristics was not as significant as expected.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.365-371
• /
• 2001

The optimum dosage of quicklime in producing organic fertilizer using livestock wastes vith a greater than 80% water content was analysed. After one day had elapsed to allow for the organic fentilizer to dry, the quicklime dosage and the composition of the organic fertilizer were analysed. Any from done to the organic fertilizer was also assessed. The amount of the quicklime required to stabilize livestock wastes was determined by water content of livestock wastes. For J farm(slurry style) of which livestock wastes have 94.6% of water concentration, less than 3% of total amount of livestock wastes, for H farm (scraper style) of which livestock wastes have 85% of water concentration, less then 4% of total livestock wastes and Y farm(traditional style) of which livestock wastes have 80% of water concentration, less then 5% of total livestock wastes. Generally, in order to pack the organic fertilizer, water containing quicklime0stabilized livestock wastes should be less than 35%. It takes 9 days to keep this water content for the wastes from H and Y farms(less than 85% in water content), and 12 days for the wastes from J (94.6% in water content). According to the classification standard for compost constitution by Higgins, the crude fertilizers from all 3 farms had high grade $K_2O$ and CaO, the middle grade T-N and middle or low grade $P_2O_5$. Stabilization by quicklime is known to inhibit bacterial decomposition of organic matter and the activity of pathogenic organisms. In this study, more then 99.99% of coliform group, fecal group and viable cell count were reduced. Our results indicate that livestock wastes of greater 80% water content could be used to produce organic fertilizer without the addition of a material for moisture control.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.7
• /
• pp.1051-1059
• /
• 2020

Overproduction and accumulation of melanin in the skin will darken the skin and cause skin disorders. So far, components that can inhibit tyrosinase, a melanin synthase of melanocytes, have been developed and used as ingredients of cosmetics or pharmaceutical products. However, most of existing substances can only inhibit the biosynthesis of melanin while melanin that is already synthesized and deposited is not directly decomposed. Thus, their effects in decreasing melanin concentration in the skin are weak. To overcome the limitation of existing therapeutic agents, we started to develop a substance that could directly biodegrade melanin. We screened traditional fermented food microorganisms for their abilities to direct biodegrade melanin. As a result, we found that a kimchi-derived Pediococcus acidilactici PMC48 had a direct melanin-degrading effect. This PMC48 strain is a new strain, different from P. acidilactici strains reported so far. It not only directly degrades melanin, but also has tyrosinase-inhibiting effect. It has a direct melanin-decomposition effect. It exceeds existing melanin synthesis-inhibiting technology. It is expected to be of high value as a raw material for melanin degradation drugs and cosmetics.

• Korean Journal of Materials Research
• /
• v.26 no.9
• /
• pp.504-511
• /
• 2016

To prepare $Mn^{4+}$-activated $K_2TiF_6$ phosphor, a precipitation method without using hydrofluoric acid (HF) was designed. In the synthetic reaction, to prevent the decomposition of $K_2MnF_6$, which is used as a source of $Mn^{4+}$ activator, $NH_5F_2$ solution was adopted in place of the HF solution. Single phase $K_2TiF_6$:$Mn^{4+}$ phosphors were successfully synthesized through the designed reaction at room temperature. To acquire high luminance of the phosphor, the reaction conditions such as the type and concentration of the reactants were optimized. Also, the optimum content of $Mn^{4+}$ activator was evaluator based on the emission intensity. Photoluminescence properties such as excitation and emission spectrum, decay curve, and temperature dependence of PL intensity were investigated. In order to examine the applicability of this material to a white LED, the electroluminescence property of a pc-WLED fabricated by combining the $K_2TiF_6$:$Mn^{4+}$ phosphor with a 450 nm blue-LED chip was measured.

• Korean Journal of Veterinary Service
• /
• v.40 no.1
• /
• pp.53-59
• /
• 2017

Foot and mouth disease (FMD) is highly infectious disease of cloven-hoofed animals, particularly problematic in cattle, sheep, pigs and goats for economic reasons. Last FMD outbreak in February, 2017 caused tremendous social and economical impacts. The Korean FMD policy aims to vaccinate intact animals and euthanize and bury infected animals to prevent the disease spread. However, there was a problem that the buried livestock did not decompose after several years. Therefore, the study was purposed to investigate the effect of Corynebacterium glutamicum and Bacillus licheniformis on the degradation of buried cow carcasses and on the soil condition; such as temperature, decomposition course of carcasses, composition of amino acids in the soil around carcasses, and plant root elongation to measure soil conditions. As a result, the composition of amino acids in the soil treated with C. glutamicum and B. licheniformis was generally higher than those in the untreated soil. Plant roots in soil treated with C. glutamicum and B. licheniformis grew longer than in non-treated soil. The results suggested that the toxic effect on a grave land buried with FMD infected livestock is reduced when treated with C. glutamicum and B. licheniformis in regard of odor reduction, promoted decaying process, and soil fertilization.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3290-3294
• /
• 2011

The properties of monomeric and dimeric salen-aluminum complexes, [salen(3,5-$^tBu)_2$Al(OR)], R = $OC_6H_4-p-C_6H_6$ (H1) and R = [salen(3,5-$^tBu$)AlOPh]C$(CH_3)_2$ (H2) (salen = N,N'-bis-(salicylidene)-ethylenediamine) as host layer materials in red phosphorescent organic light-emitting diodes (PhOLEDs) were investigated. H1 and H2 exhibit high thermal stability with decomposition temperature of 330 and $370^{\circ}C$. DSC analyses showed that the complexes form amorphous glasses upon cooling of melt samples with glass transition temperatures of 112 and $172^{\circ}C$. The HOMO (ca. -5.2~-5.3 eV) and LUMO (ca. -2.3~-2.4 eV) levels with a triplet energy of ca. 1.92 eV suggest that H1 and H2 are suitable for a host material for red emitters. The PhOLED devices based on H1 and H2 doped with a red emitter, $Ir(btp)_2$(acac) (btp = bis(2-(2'-benzothienyl)-pyridinato-N,$C^3$; acac = acetylacetonate) were fabricated by vacuum-deposition and solution process, respectively. The device based on vacuum-deposited H1 host displays high device performances in terms of brightness, luminous and quantum efficiencies comparable to those of the device based on a CBP (4,4'-bis(Ncarbazolyl) biphenyl) host while the solution-processed device with H2 host shows poor performance.