• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.207-213
• /
• 2012

It was investigated present condition and enhancement of wooden playground. Wood material is the concept of eco-friendly materials. Wood is the best material which helps children to improve their emotional and physical quality. Recently, the number of wooden playgrounds was reduced but synthetic resin material has greatly increased. It was because of the high construction cost of wooden playground. Therefore, to increase the number of wooden playgrounds, it is the most important to remind people of positive recognition about wood material.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.253-253
• /
• 2009

Electrospinning is one of the simple, cost- efficient methods to produce long continuous semiconducting oxide nanofibers. Polyvinyl Alcohol (PVA) and zinc acetate were used. PVA/Zinc acetate aqueous solutions were electrospun into nonwoven webs. CCD camera, with a lens of long working distance and digital video board were used in capturing the drop and web deposition. The diameter and morphology of nanofibers were analyzed with a Field-emission scanning electron microscopy (FE-SEM). In this study, the average diameter and morphology of nanofibers have been explorered.

• IE interfaces
• /
• v.18 no.4
• /
• pp.431-443
• /
• 2005

This paper describes a web-based system called DESIGNER for the analysis and design for automated material handling equipment(MHE) applications in manufacturing. DESIGNER models the processes for system integration, economic analysis, performance analysis, and automated storage/retrieval system(AS/RS) design. Based on the information specified by users, the various analysis modules are invoked to meet the needs of the material handling applications. The results of the analyses provide system users with useful data for material handling system design and decision on investment in automated MHE. Example problems are also presented to demonstrate the use of the system.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.238.2-238.2
• /
• 2011

Organic thin film transistors (OTFTs) have been attracting considerable attention because of their potential use in low-cost, large area, electronic devices such as flexible displays, biochemical sensors, and smart cards. In past several years, gold/pentacene has been frequently used in OTFTs because of the high mobility of pentacene and the high work function of gold. To improve the performance of the OTFTs contact area doping of pentacene with p-doping materials are well known. In this work we demonstrated selectively contact area doping of pentacene with Iodine vapor. For effective doping elevated pentacene layer under the source-drain area was deposited and exposed to Iodine vapor. We got better electrical performance for elevated pentacene structure rather than planer structure with relatively high field-effect mobility.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.533-538
• /
• 2000

This study has been carried out to develop a CRT die using hot forging. The conventional CRT die made by casting has defects such as void and inclusion. These defects of the cast die make micro-spots on the surface of the CRT which affect the quality of the final product. So, a hot forging process is developed to avoid these defects of CRT die by the model material test and the rigid-plastic FEM. Firstly, model material tests are carried out with plasticine billets in order to investigate the material flow pattern in the die cavity and to get the reasonable initial values for designing the preform in the FE simulation. And then a finite element analysis has been performed to Predict the preform and the forging load of a CRT die. We also suggest an integrated die-set which combines two die-sets into one die-set to save manufacturing time and cost in case of similar die-size.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.25-28
• /
• 2000

In this paper, three types of organic electroluminescent devices(OELD) were fabricated on mechanically flexible plastic substrate by using vacuum deposition method. The devices consist of a hole transporting material such as TPD, a light-emitting material such as Alq$\sub$3/ and an electron transporting material, blocking material such as PBD. Electrical and optical properties of these OELDs were measured. This paper shows that organic small molecules based on OELD can be successfully deposited on a flexible plastic substrate. This points open the potential for low cost mass production of flexib]e displays, including roll to roll processing.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.141-144
• /
• 2007

Polypyrrole(PPy) was composite with MWNT to attain cycle stable by chemical method. We have been considered PPy is the ideal material for high energy density electrochemical capacitor due to pseudo capacitor reaction. In this study we found that increase in cycle life due to composite MWNT. Also PPy/MWNT composite material have resulted larger capacitance and exhibits better electrochemical behavior. The structural feature was investigated by using SEM and TEM. The PPy/CNT composite is not only a promising ultracapacitor material for energy storages but also has a good possibility because of its great capacitive properties, simple preparation and low cost.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.429-436
• /
• 1999

In sheet metal forming , forming limit diagram is very important to design and analyze of sheet metal forming process. Recently tailor welded blanks of different thickness and different material and strength combinations are used widely in automobile industry to reduce car manufacturing cost. In order to analyze the forming characteristics of tailored welded blanks, we have investigated the forming limit dia-grams for 3 kinds of different material using mash seam and laser welding experimentally and dis-cussed for the characteristics of forming for tailor welded blanks. It is concluded that forming limit dia-gram for the different material combination TWB locates between FLD of the thinner base material sheet and the thicker ones.

• Journal of Biosystems Engineering
• /
• v.40 no.2
• /
• pp.102-109
• /
• 2015

Purpose: Slow manual harvesting of rain-fed chickpeas cultivated in fallow fields in developing countries have encouraged the design of a mechanical harvester. Methods: A tractor-pulled harvester was built, in which a modified stripper header detached pods from an anchored plant and a chain conveyor transferred material. The stripper harvester was redesigned to use: 1) the maneuverability of tractor-mounted frames, 2) the adaptability of floating headers, and 3) the flexibility of pneumatic conveyors. Results: A mobile vacuum conveyor, which was an innovator open system, was designed for the dilute phase transferring mode for both grain and material other than grain. A centrifugal fan transferred harvested material to a cyclone separator that settled harvested material in a grain tank 1 m high. The machine at the spot work rate of $0.42ha{\cdot}h^{-1}$ harvested chickpea pods equal to the output of 16.6 farm laborers. Conclusion: The low cost and reasonable projected purchase price are the advantages of the concept. Additionally, the shattering loss reduction confirms the feasibility of the prototype chickpea harvester for commercialization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.306-310
• /
• 1996

In this paper a series of developing process for an insulator which can be employed in overhead distribution lines, using polymeric composite materials, is introduced. In order to design an insulator for heavily polluted area, weathershed of alternating type was adopted, which could have longer leakage distance. Modified EVA was used as surface material which has good electrical and mechanical characteristics as well as superior chemical stability. FRP core was covered with above surface material through heat shrinking process. By standardization of each process, higher productivity and lower production cost could be ensured. The developed insulator has been put under various tests including long-term field test and artificial aging test and satisfactory results were obtained.