• Nuclear Engineering and Technology
• /
• 제50권4호
• /
• pp.619-626
• /
• 2018

Most publications confirm that an ecological interface is a very efficient tool to supporting operators in recognition of complex and unusual situations and in decision-making. The present article describes the experience of implementation of an ecological interface concept for visualization of material balance in a drum separator of RBMK-type NPPs. Functional analysis of the domain area was carried out and revealed main factors and contributors to the balance. The proposed ecological display was designed to facilitate execution of the most complicated cognitive operations, such as comparison, summarizing, prediction, etc. The experimental series carried out at NPPs demonstrated considerable reduction of operators' mental load, time of reaction, and error rate.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.7-16
• /
• 1999

To maintain thereasonable temperature in the engines is very important to keep the steady combustion state of engine and to prevent increasing of oil consumption , deteriorating of lubricant, shortening of the life time of engine and decreasing of material strength. The method of energy balance for divided elements of radiator and engine-oil cooler is considered to analyse the performance of radiator and engine-oil cooler. The data obtained by engine test and vehicle cooling tunnel test are applied to program for calculation of radiator outlet temperature. As a result, data obtained by numerical analysis agree well with those by experiments. And thus, it is concluded that this simulation program is available in developing the cooling system for a new car.

• 한국정밀공학회지
• /
• 제11권4호
• /
• pp.58-68
• /
• 1994

An equilibrium approach is suggested as an effective tool for the analysis of sheet metal forming processes on the basis of force balance together with geometric relations and plasticity theroy. In computing a force balance equation, it is required to define a geometric curve approximating the shape of the sheet metal at any step of deformation from the geometric interaction between the die and the deforming sheet. Then the geometic informations for contacting and non-contacting sections of the sheet metal such as the number and length of both non-contact region, contact angle, and die radius of contact section are known from the geometric forming curve and utilized for optimization by force balance equation. In computation, the sheet material is assumed to be of normal amisotropy and rigid-phastic workhardening. It has been shown that there are good agreements between the equilibrium approach and FEM computation for the benchmark test example and auto-body panels whose sections can be assumed in plane-strain state. The proposed equilibrium approach can thus be used as a robust computational method in estimating the forming defects and forming severity rather quickly in the die design stage.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1341-1346
• /
• 2004

The OLED research is gone for two directions. One is material development research, and another one is structural improvement part. All two are thing to heighten luminescence efficiency of OLED. n other to improve luminescence efficiency of OLED Electron - hole pairs must consist much more in the device Their profiles are sensitive to mobility velocity of electrons and holes. In this paper, we demonstrate the difference of velocity between hole and electron by experiments, and compare with a data of simulation and experiment changing hole carrier transport layer thickness, so we get the optimal we improve luminescence efficiency. We suggest improving the efficiency of OLEDS would be to balance the injection of electrons and holes into light emission layer of the device. And, we improve understanding of the various luminescence efficiency through experiments and numerical analysis of luminescence efficiency in variable hole carrier transport layer's thickness.

• 대한기계학회논문집B
• /
• 제23권9호
• /
• pp.1201-1212
• /
• 1999

A numerical analysis is performed to predict the thermal response and ablation rate for charring or non-charring material which is designed to be used as thermal protection system (TPS). The numerical program composed of in-depth energy balance equation and the aerotherm chemical equilibrium (ACE) program. The ACE program calculates various thermochemical state from ablation products. The developed numerical program is verified by comparing the reported results from literature. The sensitivity tests for input parameters are performed. The thermal behavior of ablating material is mainly affected by density of ablating material, convective heat transfer coefficient and recovery enthalpy of flow field.

• Coupled systems mechanics
• /
• 제8권5호
• /
• pp.377-391
• /
• 2019

The present paper is focused on analyzing the delamination of inhomogeneous multilayered rods of circular cross-section loaded in torsion. The rods are made of concentric longitudinal layers of individual thickness and material properties. A delamination crack is located arbitrary between layers. Thus, the internal and external crack arms have circular and ring-shaped cross-sections, respectively. The layers exhibit continuous material inhomogeneity in radial direction. Besides, the material has non-linear elastic behavior. The delamination is analyzed in terms of the strain energy release rate. General solution to the strain energy release rate is derived by considering the energy balance. The solution is applied to analyze the delamination of cantilever rod. For verification, the strain energy release rate is derived also by considering the complementary strain energy.

• 한국가스학회지
• /
• 제22권1호
• /
• pp.64-77
• /
• 2018

Horseshoe Canyon 석탄층 메탄가스 광구 4개 생산정의 생산이력과 압력 시험자료를 바탕으로 물질평형법과 감퇴곡선법을 이용하여 원시부존량을 예측하는 연구를 수행하였다. 물질평형법은 전통가스 물질평형법과 Jensen and Smith법을 이용하였고, 감퇴곡선법은 Arps 경험식과 Khaled 법을 이용하였다. 그 결과, 전통가스 물질평형법과 Jensen and Smith법을 이용한 경우의 차이는 12% 이내로 부존량 예측에 큰 차이는 없고, 감퇴곡선법을 적용한 경우, 감퇴지수가 1이상, 최대 3.5에 이르러, Arps 방정식을 이용하면 부존량이 무한대로 산출되므로 Khaled 법을 적용하는 것이 적절하였다. 전통가스 물질평형방정식을 이용한 부존량 예측 결과와 Khaled 법을 이용한 예측 결과의 차이는 8.67% ~ 31.04% 였고, Jensen and Smith 방정식과 Khaled 법을 이용한 부존량 예측 결과의 차이는 13.67% ~ 26.49%로 후자의 경우가 차이가 더 적었다.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.809-827
• /
• 2015

In this paper, seismic energy response of inelastic steel structures under earthquake excitations is investigated. For this purpose, a numerical procedure based on nonlinear dynamic analysis is developed by considering material, geometric and connection nonlinearities. Material nonlinearity is modeled by the inversion of Ramberg-Osgood equation. Nonlinearity caused by the interaction between the axial force and bending moment is also defined considering stability functions, while the geometric nonlinearity caused by axial forces is described using geometric stiffness matrix. Cyclic behaviour of steel connections is taken into account by employing independent hardening model. Dynamic equation of motion is solved by Newmark's constant acceleration method in the time history domain. Energy response analysis of space frames is performed by using this proposed numerical method. Finally, for the first time, the distribution of the different energy types versus time at the duration of the earthquake ground motion is obtained where in addition error analysis for the numerical solutions is carried out and plotted depending on the relative error calculated as a function of energy balance versus time.

• 전력전자학회논문지
• /
• 제11권5호
• /
• pp.454-462
• /
• 2006

현재 LCD 인버터의 경쟁력을 키우기 위해 인버터 하나로 다수의 램프를 병렬 구동하는 방식이 많이 사용되고 있다. 본 논문에서는 병렬 구동방식 중 Jin Balance와 O2Micro 방식에 대해 이론적으로 분석하고, 특히 각각의 램프 전류 편차를 일정하게 유지하기 위한 자화 인덕턴스 값의 설계에 대하여 설명하였다. 위의 결과를 이용하여 새로운 전류 평형 방식을 제안하고 수학적으로 분석하였으며, 모의실험을 통해 제안 방식의 정확성을 검증하였다.

• 에너지공학
• /
• 제17권2호
• /
• pp.107-115
• /
• 2008

신에너지원으로 주목받고 있는 중질 잔사유를 기존 중유화력의 대체 연료로 사용하는 경우에 대하여 상용 해석코드로 플랜트의 에너지 및 물질 수지, 플랜트의 성능을 분석하였다. 국내 A 중유 화력발전소에 대한 플랜트 성능분석 모델을 구축하였으며 플랜트의 성능 및 효율 등에 대한 시뮬레이션 결과를 설계 및 실제 운전 데이터와 비교하여 그 건전성을 확인하였다. 중질 잔사유 적용에 대한 시뮬레이션 결과 출력은 315 MW로서 중유 적용시의 300 MW 보다 높게 나타났으며 플랜트 효율은 약간 감소함을 알 수 있었다. 외기온도 및 냉각수 온도, 배가스 순환량, 출력에 따른 열소비율의 민감도 분석으로부터 중질 잔사유 연소시의 최적 운전을 위한 기본 자료를 얻을 수 있었다.