• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.268-274
• /
• 2004

Patch type piezo-polymer sensors for smart structures were experimented to detect elastic wave. The pencil lead braking test was performed to analyze the characteristics of patch-type piezo-polymer sensors such as polyvinyliden fluoride (PVDF) and polyvinylidene fluoride trifluorethylene (P(VDF-TrFE)) for several test specimens with various elastic wave velocities and acoustical impedances. The characteristics of the patch-type piezo-polymer sensor were compared with the commercial PZT acoustic emission (AE) sensor. The vacuum grease and epoxy resin were used as a couplant for the acoustic impedance matching between the sensor and specimen. The peak amplitude of elastic wave increased as the diameter of piezo-film and acoustical impedance of the specimen increased. The frequency detection range of the piezo-film sensors decreased with increasing diameter of the piezo-film sensor. The P(VDF-TrFE) sensor was more sensitive than the PVDF sensor.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.9
• /
• pp.1-10
• /
• 2000

This paper proposes symbol decoding schemes combined with channel estimation techniques for coded orthogonal frequency division multiplexing (COFDM) systems in fading channels. sThe proposed symbol decoding schemes are consisted of a symbol decoding technique and channel estimation techniques. The symbol decoding based on Viterbi algorithm is achieved by matching the length of branch word from encoder trellis to the codeword length of symbol candidate on decoder trellis. Three combination schemes are described and their error performances are compared. The first scheme is to combine a symbol decoding technique with a training channel estimation technique. The second scheme joins a decision directed channel estimation technique to the first scheme. The time varying channel transfer functions are tracked by the decision directed channel estimation technique and the channel transfer functions used in the symbol decoder are updated every COFDM symbol. Finally, In order to reduce the effect of additive white Gaussian noise (AWGN) between adjacent subchannels, deinterleaved average channel estimation technique is combined. The error performances of the three schemes are significantly improved being compared with that of zero forcing equalizing schemes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.937-942
• /
• 2007

A new, systematic, simplified design procedure for quasi-Yagi antennas is presented. The design is based on the simple impedance matching among antenna components: i.e., transition, feed, and antenna. This new antenna design is possible due to the newly developed ultra-wideband transition. As design examples, wideband quasi-Yagi antennas are successfully designed and implemented in Ku- and Ka-bands with frequency bandwidths of 53.2% and 29.1%, and antenna gains of $4{\sim}5 dBi$ and $ 5{\sim}5.6 dBi$, respectively. The design method can be applied to other balanced antennas and their arrays.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.913-919
• /
• 2008

A new design and its experimental results of a microstrip-fed ultra-wideband tapered slot antenna(TSA) for millimeter-wave systems are presented. By utilizing the ultra-wideband microstrip-to-CPS transition(balun), ultra-wideband characteristics of the inherent TSA are retrieved. Also, the design procedure of the TSA is simplified by performing simple impedance matching between balun and antenna. The proposed TSA is shaped by using the Fermi-Dirac tapering function and corrugated at the outer edge. The implemented antenna demonstrates ultra-wideband performance for frequency ranges from 23 to over 58 GHz with the relatively high and flat antenna gain of 12 to 14 dBi and low sidelobe levels. In addition, a 4-element linear antenna array for phased-array systems and mm-wave sensor applications is also presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.4
• /
• pp.266-269
• /
• 2018

A compact Q-band waveguide-to-microstrip transition for UAV(Unmanned Aerial Vehicle) radiometer applications is presented. The key features of this transition are simplicity, compactness, easy matching, and lower sensitivity to the dimensions and fabrication tolerances. The simple E-plane patch-type design is insensitive to the backshort cavity enclosure and misalignment between the waveguide and microstrip substrate. The primary parameters are optimized using a three-dimensional(3D) electromagnetic simulator(ANSYS HFSS). It exhibited better than 20-dB return loss at mid-band frequencies with less than 1-dB insertion loss for the back-to-back transition, and a return loss better than 15 dB over the frequency range of 36 GHz to 42 GHz.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1047-1052
• /
• 2016

In this paper, we propose the CSLR(: Complementary Single Loop Resonators)-loaded inset fed patch antenna with a conducting reflector to improve the radiation patterns. Reflector of the proposed antenna is located below about ${\lambda}_0/4$ from the ground plane of the patch, the size is about two times of the patch. The proposed antenna is designed and fabricated on the substrate which has a dielectric constant and thickness with 2.5 and 0.787 mm, respectively. Simulation results are obtained by using the HFSS, 3D EM Solver based Finite Element Method(: FEM). The resonant frequency and matching characteristics of the antenna with reflector are substantially the same as when there is no change in the antenna without reflector, it is confirmed that radiation patterns are significantly improved by the reflector.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.11
• /
• pp.919-925
• /
• 2016

In this study, the Lamb wave mixing technique, which is basised on advanced research on the nonlinear bulk wave mixing technique, is applied for corrosion detection. To demonstrate the validity of the Lamb wave mixing technique, an experiment was performed with normal and corroded specimens. Comparison group in an experimentation are selected to mode and frequency with dominant in-plane displacement and out-of-plane displacement of Lamb waves. The results showed that the Lamb wave mixing technique can monitor corrosion defects, and it has a trend similar to that of the conventional Lamb wave technique. It was confirmed that the dominant displacement and mode matching the theory were generated. Flaw detectability is determined depending on displacement ratio instead of using the measurement method and mode selection.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.10
• /
• pp.5229-5232
• /
• 2012

The incidence of malignant melanoma increases with age. One significiant effect of aging processes is an accumulation of oxidative damage in the genetical material. In this study, the relationship between malignant melanoma and damage in chromosomes and proliferative effectiveness of human peripheral lymphocytes were investigated by the micronucleus (MN) technique. A total of 15 malignant melanoma patients and appropriately matching 15 healthy controls were involved in the study. MN frequencies and proliferative indexes (PI) after non toxic levels of hydrogen peroxide treatment were also measured to determine damaging effect of oxidative stress in genome in addition to measuring the spontenous levels of micronuclei and PI. The patient group had a significantly higher rate of spontaneous MN than the control group (p<0.01). After treatment with $H_2O_2$, MN frequencies in the patient group was significantly decreased (p<0.01) although there was no difference between the treated and untreated results of control group (p=0.29). There was also difference (p<0.01) between the MN frequencies of the patient and the control group either in the spontaneous levels or in the $H_2O_2$ treated groups. The same significant difference persisted when the PI values were compared between patient and control groups. Increase in the MN frequency in patients could mean the alterations in the chromosomal structure which may lead to the chromosome instability and therefore genetic susceptibility to cancer. This increased number of micronuclei can also be used for cytological marker in identifying high risk cases for malignant melanoma.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.103-109
• /
• 2005

This paper presents the design of a broadband hybrid mixer using dual-gate FET topology with a low-pass filter which improves return loss of output to isolate RF and LO signal. The low-pass filter shows the isolation with RF and LO signal of better than 40 dBc from 1.5 GHz to 5.5 GHz. The dual-gate mixer which has been designed by using cascade topology operates when the lower FET is biased in linear region and the upper FET is in saturation region. The input matching circuit has been designed to have conversion gain from 1.5 GHz to 5.5 GHz. The designed mixer with low-pass filter shows the conversion gain of better than 7 dB from 1.5 GHz to 5.5 GHz at the low LO power level of 0 dBm with the fixed IF frequency of 21.4 MHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.820-826
• /
• 2013

In this paper, a compact and wideband CLAS(Conformal Load bearing Antenna Structure) was studied using smart skin technique. In order to satisfy the electrical performance of the CLAS antenna, the proposed CLAS antenna is composed of conductive mesh, face-sheet, radiator, honeycomb, housing. Especially, radiator is composed of composite magneto-dielectric material and radiating element etched on the PCB (Printed Circuit Board). The radiating element is inserted into the composite magneto-dielectric material and has sloted Folded LP(Log Periodic) structure. By fabricated composite magneto-dielectric, the resonance frequency is decreased and the impedance matching characteristics is improved. We verified that the antenna has wideband characteristics and compact size using the antenna test results.