• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.33-40
• /
• 2007

In this paper, low-rate TCP attack as one of shrew attacks is considered and the scaling based dynamic time warping (S-DTW) algorithm is introduced. The low-rate TCP attack can not be detected by the detection method for the previous flooding DoS/DDoS (Denial of Service/Distirbuted Denial of Service) attacks due to its low average traffic rate. It, however, is a periodic short burst that exploits the homogeneity of the minimum retransmission timeout (RTO) of TCP flows and then some pattern matching mechanisms have been proposed to detect it among legitimate input flows. A DTW mechanism as one of detection approaches has proposed to detect attack input stream consisting of many legitimate or attack flows, and shown a depending method as well. This approach, however, has a problem that legitimate input stream may be caught as an attack one. In addition, it is difficult to decide a threshold for separation between the legitimate and the malicious. Thus, the causes of this problem are analyzed through simulation and the scaling by maximum auto-correlation value is executed before computing the DTW. We also discuss the results on applying various scaling approaches and using standard deviation of input streams monitored.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.400-409
• /
• 2017

We have studied a combiner that can withstand high power while minimizing insertion loss in high frequency band. In particularly, because the output power that can be output per unit elements is much lower in the Ku band and above than in the low frequency band, it is necessary to combine many semiconductor elements in order to make a high power SSPA. A planar combiner such as a microstrip, as the number of elements to be combined increases, the insertion loss increases proportionally, resulting in a reduction in the overall system efficiency and an increase heating value also. The planar combiner also have some problems due to the low power handling rate. To improve these problems, we proposed a Cavity Radial Combiner. A Ku band 16-way Cavity Radial Combiner was fabricated and measured. As a result, it was tested 14dB return loss and over 94.5 % output combining efficiency in design band.

• Journal of the Korean Society of Costume
• /
• v.29
• /
• pp.5-22
• /
• 1996

the present thesis aims to contribute to the further development of the men's wear indus-try in Korea which now confronts the need to adjust itself more actively to the conditions of the coming age of internationalization and free trade. To achieve this this thesis suggests the trade should provide for the changing domestic needs on theone hand and refine its wares as high value-added products in compe-tition with those from the advanced countries in fashion industry on the other, The history of the 'suit' the standard men's attire dates back to 1850 when the 'Ditto suit' was introduced composed of coat waist coat vest and trousers to remain virtually unchanged till the end of the nineteenth cen-tury and the modern men's wear originated in Britain. In Korea since the introduction of western clothes from 1876 custom-made suits had been dominant until 1944 while western clothes earned popular currency between 1945 and 1964 and ready-made suits began to spread with their advantages recognized in terms of practicality convenience and functionality The next phase from 1965 to 1985 witnessed the establishment of a number of ready-made brands although custom-made suits stayed in their height of prosperity until 1975. The turn-ing point for the men's wear industry came in 1975 when high-calss ready-made brands be-gan to turn up with the arrival of large companies in the market matching the change in consumers' life style. The men's wear market went through further diversification and specialization dur-ing the years between 1985. and 1990. Around the year 1990 however the expansion of the business suit industry came to slow down ac-companied by an oversupplied market. The fashion of pragmatism in the 1990s called for the growth of the casual wear department and as consumers' life style became more and more individualized conscious dressing in accord ance with T.P.O established itself as an important branch of culture, Such casual boom is likely to aid in promoting Korea's men's wear indus-try to peer with that of advanced countries. Consumers' fashion sense is now ahead of the trade's as well as being shortcycled highly individualized stylized and diversified. To meet consumers' demands under such circum-stances each company is required to develop its unique soft Know How based on accurate information and strategically specialized plan-ning. The trade should convert its hithero producer-oriented strategy to a new consumer oriented one and actively lead the needs and purchasin g pattern of consumers by providing an efficient and reasonable price policy with optimum supply of merchandise and also by presenting 'our' trend suited to our circum-stances.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.4
• /
• pp.10-21
• /
• 2008

The present paper propose a real-time moving object recognition and tracking method using the wavelet-based neural network and invariant moments. Candidate moving region detection phase which is the first step of the proposed method detects the candidate regions where a pixel value changes occur due to object movement based on the difference image analysis between continued two image frames. The object recognition phase which is second step of proposed method recognizes the vehicle regions from the detected candidate regions using wavelet neurual-network. From object tracking Phase which is third step the recognized vehicle regions tracks using matching methods of wavelet invariant moments bases to recognized object. To detect a moving object from image sequence the candidate regions detection phase uses an adaptive thresholding method between previous image and current image as result it was robust surroundings environmental change and moving object detections were possible. And by using wavelet features to recognize and tracking of vehicle, the proposed method decrease calculation time and not only it will be able to minimize the effect in compliance with noise of road image, vehicle recognition accuracy became improved. The result which it experiments from the image which it acquires from the general road image sequence and vehicle detection rate is 92.8%, the computing time per frame is 0.24 seconds. The proposed method can be efficiently apply to a real-time intelligence road traffic surveillance system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3123-3129
• /
• 2016

Background: Cancer is the fourth leading cause of death in Sabah Malaysia with a reported age-standardized incidence rate was 104.9 per 100,000 in 2007. The incidence rate depends on non-mandatory notification in the registry. Under-reporting will provide the false picture of cancer control program effectiveness. The present study was to evaluate the performance of the cancer registry system in terms of representativeness, data quality, simplicity, acceptability and timeliness and provision of recommendations for improvement. Materials and Methods: The evaluation was conducted among key informants in the National Cancer Registry (NCR) and reporting facilities from Feb-May 2012 and was based on US CDC guidelines. Representativeness was assessed by matching cancer case in the Health Information System (HIS) and state pathology records with those in NCR. Data quality was measured through case finding and re-abstracting of medical records by independent auditors. The re-abstracting portion comprised 15 data items. Self-administered questionnaires were used to assess simplicity and acceptability. Timeliness was measured from date of diagnosis to date of notification received and data dissemination. Results: Of 4613 cancer cases reported in HIS, 83.3% were matched with cancer registry. In the state pathology centre, 99.8% was notified to registry. Duplication of notification was 3%. Data completeness calculated for 104 samples was 63.4%. Registrars perceived simplicity in coding diagnosis as moderate. Notification process was moderately acceptable. Median duration of interval 1 was 5.7 months. Conclusions: The performances of registry's attributes are fairly positive in terms of simplicity, case reporting sensitivity, and predictive value positive. It is moderately acceptable, data completeness and inflexible. The usefulness of registry is the area of concern to achieve registry objectives. Timeliness of reporting is within international standard, whereas timeliness to data dissemination was longer up to 4 years. Integration between existing HIS and national registration department will improve data quality.

• The Research Journal of the Costume Culture
• /
• v.16 no.6
• /
• pp.1050-1063
• /
• 2008

A movie is a fiction made on a basis of an author's and a writer's imagination, but all sorts of properties mixed with each other and most realistically expresses the era which becomes the background of a movie and acts as a carrier that connects designers with consumers. Thus, this study was carried out to review how the fashion products that designer's intention and commercial value added are expressed in collections by comparing and analysing the costumes in the movie "The Great Gatsby" that described the life of America's upper-class in 1920s and the 04 S/S Y&Kei collection which were proceeding after getting inspiration from this movie. For this, literature materials were inspected in order to make a theoretical review on social and cultural background and costumes history background in 1920s and the photo materials on movie costume were collected and analysed using DVD video captures, as well as the photo materials on 04 S/S Y&Kei were collected and analyzed through the institute providing domestic fashion information. The following conclusion was deduced through this study. First, in 1920s which becomes the background of this study, the slim shape of Flapper which looks like a young and boy became an ideal figure condition and the straight silhouette with low waist line and the short skirt that rose to knee was popular. Second, as a result of analysing movie costume by classifying it in silhouette, colors, and materials, straight silhouette of low waistline with a near colored - tone seen in the pastel series, including white, beige, pink, and gray was mainly constituted and the metal colors like silver and gold were used. As a material, chiffon, satin, velvet, flower patterned prints, and beads were used, which represented luxurious life of women in the upper classes. Third, as a result of comparing and analysing, it turned out that there was a similarity. However, in dress collection for a heroine, some dissimilarity differentiated from a movie costumes was found out in that the dresses in collection expressed moderate beauty and modernism and elegant beauty at the same time by matching a variety of materials and using black color.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.503-510
• /
• 2006

Readout circuit is to convert signal occurred in a defector into suitable signal for image signal processing. In general, it has to possess functions of impedance matching with perception element, amplification, noise reduction and cell selection. It also should satisfies conditions of low-power, low-noise, linearity, uniformity, dynamic range, excellent frequency-response characteristic, and so on. The technical issues in developing image processing equipment for focal plane way (FPA) can be categorized as follow: First, ultraviolet (UV) my detector material and fine processing technology. Second, ReadOut IC (ROIC) design technology to process electric signal from detector. Last, package technology for hybrid bonding between detector and ROIC. ROIC enables intelligence and multi-function of image equipment. It is a core component for high value added commercialization ultimately. Especially, in development of high-resolution image equipment ROIC, it is necessary that high-integrated and low-power circuit design technology satisfied with design specifications such as detector characteristic, signal dynamic range, readout rate, noise characteristic, ceil pitch, power consumption and so on. In this paper, we implemented a $8\times8$ FPA prototype ROIC for reduction of period and cost. We tested unit block and overall functions of designed $8\times8$ FPA ROIC. Also, we manufactured ROIC control and image boards, and then were able to verify operation of ROIC by confirming detected image from PC's monitor through UART(Universal Asynchronous Receiver Transmitter) communication.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.37-47
• /
• 2009

For the inspection of wood, machine vision is the most common automated inspection method used at present. It is required to sort wood products by grade and to locate surface defects prior to cut-up. Many different sensing methods have been applied to inspection of wood including optical, ultrasonic, X-ray sensing in the wood industry. Nowadays the scanning system mainly employs CCD line-scan camera to meet the needs of accurate detection of lumber defects and real-time image processing. But this system needs exact feeding system and low deviation of lumber thickness. In this study low cost CCD area sensor was used for the development of image processing system for lumber being fed. When domestic red pine being fed on the conveyer belt, lumber images of irregular term of captured area were acquired because belt conveyor slipped between belt and roller. To overcome incorrect image merging by the unstable feeding speed of belt conveyor, it was applied template matching algorithm which was a measure of the similarity between the pattern of current image and the next one. Feeding the lumber over 13.8 m/min, general area sensor generates unreadable image pattern by the motion blur. The red channel of RGB filter showed a good performance for removing background of the green conveyor belt from merged image. Threshold value reduction method that was a image-based thresholding algorithm performed well for knot detection.

• Development and Reproduction
• /
• v.19 no.4
• /
• pp.259-264
• /
• 2015

Genomic DNA samples isolated from geographical purplish Washington clam (Saxidomus purpuratus) were obtained from three different regions in the Korean Peninsula: Geoje (Geoje population; GJP), Gunsan (Gunsan population; GSP) and a site of North Korea (North Korea population; NKP). The seven primers generated the total 369 loci that can be scored from the GSP clam population. 356 fragments were generated from the NKP clam population. The complexity of the banding patterns varies dramatically between the primers and three localities. In this study, 319 loci were identified in the purplish Washington clam from Geoje and 369 in the clam population from Gunsan: 221 specific loci (69.3%) in the GJP clam population and 300 (81.3%) in the GSP population. These results demonstrate that the primer detected a large quantity of specific fragments, suggesting that the genetic variation in the GSP is higher than in the GJP population. In particular, the BION-28 primer gave DNA profiles with more fragments than the other six primers in the NKP population. The oligonucleotides primer BION-75 produced 21 unique loci to each population, which were ascertaining each population, approximately 250 bp, 300 bp and 400 bp, in the GJP population. Outstandingly, the primer BION-50 detected 21 shared loci by the three populations, major and/or minor fragments of sizes 150 bp, which were matching in all samples. With regard to average bandsharing value (BS) results, individuals from GJP population (0.743) displayed higher bandsharing values than did individuals from GSP population (0.606). In the present study, the dendrogram gained by the seven oligonucleotides primers indicates three genetic clusters: cluster 1 (GEOJE 01 ~ GEOJE 07), cluster 2 (GUNSAN 08 ~ GUNSAN 14), cluster 3 (N.KOREA 15 ~ N.KOREA 21). Among the twenty one clams, the shortest genetic distance that revealed significant molecular differences was between individuals 08 and 09 from the NKP population (genetic distance = 0.073), while the longest genetic distance among the twenty-one individuals that demonstrated significant molecular differences was between individuals GEOJE no. 03 and GUNSAN no. 09 (genetic distance = 0.669). Comparatively, individuals of GJP population were properly closely related to that of NKP population, as revealed in the hierarchical dendrogram of genetic distances. In due course, PCR analysis has revealed the significant genetic distance among three purplish Washington clam populations. PCR fragments discovered in this study could be valuable as a DNA marker of the three geographical clam populations to distinguish.

• Environmental and Resource Economics Review
• /
• v.26 no.3
• /
• pp.417-449
• /
• 2017

The purpose of this study is to analyze the effect of local area concentration of particulate matter on life satisfaction, by matching subjective satisfaction in the Korea Labor & Income Panel Study data with daily data of $PM_{10}$ and $PM_{2.5}$. We find that the concentration of particulate matter has a significant negative effect on satisfaction. A $1{\mu}g/m^3$ increase in $PM_{10}$($PM_{2.5}$) leads to lower the probability of choosing 'satisfaction' by 0.042%p~0.091%p(0.034%p~0.153%p) and a 1% increase in annual income per household raises the probability of choosing 'satisfaction' by 0.16%p~0.18%p respectively. To estimate the monetary value of reducing $PM_{10}$ and $PM_{2.5}$, we calculate willingness-to-pay for mitigating air pollution, which represents the tradeoff between the reduction in particulate matter and income. We find that people on average are willing to pay \108,787($96)~209,519($186) for a $1{\mu}g/m^3$ reduction in $PM_{10}$ and to pay 89,345($79)~362,930($322) in $PM_{2.5}$. This amount corresponds to 0.26%~0.50%(0.22%~0.88%) of the average annual household income in South Korea.