• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.9
• /
• pp.76-84
• /
• 1994

This paper presents a new high-performance VLSI architecture and VLSI implementation for full-search block matching algorithm. The proposed VLSI architecture has the feature of two directional parallel and pipeline processing, thereby reducing the PE idle time at which the direction of block matching operation within the search area is changed. Therfore, the proposed architecture is faster than the existing architectures under the same clock frequency. Based on HSPICE circuit simulation, it is verified that the implemented procesing element is operated successfully within 13 ns for 75 MHz operation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.310-317
• /
• 2006

Currently most practical vibration and structural problems in automotive suspensions require the use of the finite element method to obtain their structural responses. When the finite element model has a very large number of degrees of freedom the harmonic and dynamic analyses are computationally too expensive to repeat within a feasible design process time. To alleviate the computational difficulty, this paper presents a moment-matching based model order reduction (MOR) which reduces the number of degrees of freedom of the original finite element model and speeds up the necessary simulations with the reduced-size models. The moment-matching model reduction via the Arnoldi process is performed directly to ANSYS finite element models by software mor4ansys. Among automotive suspension components, a knuckle is taken as an example to demonstrate the advantages of this approach for vibration simulation. The frequency and transient dynamic responses by the MOR are compared with those by the mode superposition method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.6
• /
• pp.501-509
• /
• 1988

A new type toroidal core transformer for impedance matching for 30MHz~90MHz has been designed and fabricated. It is shown to be reasonably good characteristics that insertind loss was 1.2[dB], VSWR was 1:2.0 and 100[%] bandwidthe was achieved. It is expected that resulting transformer can be used to replace existing frequency selector type matching network because it is much more compact and relatively easy to contruct.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1427-1429
• /
• 1997

In this study, piezoelectric transducer were designed and manufactured using PZT-5A which have relatively high electromechanical coefficient. A epoxy is a good material as matching and backing layers. The envelope was reduced 60% as using matching layer and 76% as using matching and backing layer. NDT was successfully carried out for aluminum test pieces. Distance error and resolution of PZT-5A probe were improved as increasing frequency. Envelope was effectively reduced by backing layer but sensitiveness was poor.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.278-281
• /
• 2000

Matching pursuit algorithm is a signal expansion technique whose efficiency for motion compensated residual image has already been demonstrated in the MPEG-4 framework. However, one of the practical concerns related to applying matching pursuit algorithm to real-time scalable video coding is its massive computation required for finding dictionary elements. In this respective, this paper proposes a fast algorithm, which is composed of three sub-methods. The first method utilizes the property of symmetry in 1-D dictionary element and the second uses mathematical elimination of inner product calculation in advance, and the last one uses frequency property of 2-D dictionary. Experimental results show that our algorithm needs about 30% computational load compared to the conventional fast algorithm using separable property of 2-D gabor dictionary with negligible quality degradation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.830-833
• /
• 2005

SDM(Structural Dynamics Modification) is to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary(modifying) structures. In this paper, I will focus on the optimal layout of the stiffeners which are attached to the plate to maximize 1st natural frequency. Recently, a new topology method was proposed by yamazaki. He uses growing and branching tree model. I modified the growing and branching tree model. The method is designated modified tree model. To expand the layout of stiffeners, I will consider non-matching problem. The problem is solved by using local lagrange multiplier without the mesh regeneration. Moreover The CMS(Component mode synthesis) method is employed to reduce the computing time of eigen reanalysis using reduced componet models.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.340-347
• /
• 1999

The acoustic performance of reactive type single expansion chamber can be calculated theoretically by plane wave theory. But higher order model should be considered to widen the frequency range. Mode matching method has been developed to consider higher order modes, but very complicated algebra should be used. Munjal suggested a numerical collocation method, which can overcome the shortcomings of mode matching method, using the compatibility conditions for acoustic pressure and particle velocity at the junctions of area discontinuities. But the restriction of Munjal's method is that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In this paper, the new method was suggested to overcome the shortcomings of Munjal's method. The predictions by this method was also compared with those by the finite element method and Munjal's method in order to demonstrate the accuracy of the modified method presented here.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.290-295
• /
• 2003

In this study, we investigated the effect of particle size of Mn-Zn ferrite which is used as a material of electromagnetic wave absorber on electromagnetic wave properties. With increasing the particle size, the matching frequency is shifted toward lower frequency and the absorption ability of electromagnetic wave is decreased. We suggest that a sheet-type ferrite absorber composed of Mn-Zn ferrite with large particle is useful to compare with it composed of small particle size for mobile phone.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.55-58
• /
• 1997

In this paper, we study a signal processing method which extracts each MUAP(motor unit action potential) from EMG(Electromyogram) interference pattern or clinical diagnostic purposes. First of all, differential digital filtering is selected or eliminating the spike components of the MUAP's from the background noise. And, the algorithm identifies the spikes over the certanin threshold by template matching in frequency domain. After missing or false firing actor is cut off at the IPI(inter pulse interval) histogram, we averages the MUAP waveforms from the raw signal using the identified spikes as triggers, and Finally, measures their amplitudes, durations, and numbers of phases. Specially, We introduce algorithm performed by template matching in the frequency domain. A typical 3-s signal recorded from the biceps brachii muscle using a conventional needle electrode during a isometric contraction is used. Finally, the method decomposed five simultaneous active MUAP's from original EMG signal.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1680-1682
• /
• 1999

In this study, three kinds of Mn-Zn ferrite/Ni-Zn ferrite/$Ni_2Y$ ferroxplana prepared by the coprecipitation method were compounded with the silicon rubber, and the ring-shaped specimens with various compositional ratio were made. The material constant of ferrite/rubber composite absorbers was obtained by the 2-port method. The material constants of the ferrite/rubber composite microwave absorber made of three kinds of ferrite with various compositional ratio were utilized in design the matching conditions (frequency and thickness) on the impedance matching map. We were able to predict the matching condition from the matching map. On all three kinds of ferrite/rubber composite microwave absorber with less than compositional ratio 60[wt.%] of ferroxplana, we have found that the reflection losses were over than 20[dB] at the S-Band $(2\sim4[GHz])$ and C-Band$(4\sim8[GHz])$.