• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.4
• /
• pp.241-248
• /
• 2017

GCPs (Ground Control Points) are needed to correct the DEM (Digital Elevation Model) produced from high-resolution satellite images and the RPC (Rational Polynomial Coefficient). It is difficult to acquire the GCPs through field surveys such as GPS surveys and to read the image coordinates corresponding to the GCPs. In addition, GCPs cannot cover the entire image of the test site, and the RPC correction results may be influenced by the arrangement and distribution of the GCPs in the image. Therefore, a new method for the RPC correction is needed. In this study, an LHD (Least-squares Height Difference) DEM matching method was applied using previous DEMs: SRTM DEM, digital map DEM, and corrected IKONOS DEM. This was carried out to correct the DEM produced from KOMPSAT-3 satellite images and the provided RPC without GCPs. The IKONOS DEM had the highest accuracy, and the height accuracy was about ${\pm}3m$ RMSE in a mountainous area and about ${\pm}2m$ RMSE in an area with only low heights.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.776-785
• /
• 2011

Since the Internet-based real-time Global Positioning System(GPS) synchronized widearea power system frequency monitoring network (FNET) was proposed in 2001, it has been monitoring the power system frequency in interconnected United States power systems and numerous interesting behaviors have been observed, including frequency excursion propagation. We address the consistency of a frequency excursion detection order of frequency disturbance recorders in FNET in relation to the same generation trip, as well as the ability to recreate by power systems dynamic simulation. We also propose a new method, as an application of FNET measurement, to locate a tripped generator using power systems dynamic simulation and wide-area frequency measurement. The simulation database of all the possible trips of generators in the interconnected power systems is created using the off-line power systems dynamic simulation. When FNET detects a sudden drop in the monitoring frequency, which is most likely due to a generation trip in power systems, the proposed algorithm locates a tripped generator by finding the best matching case of the measured frequency excursion in the simulation database in terms of the frequency drop detection order and the time of monitoring points.

• Journal of Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.483-491
• /
• 2009

In this paper, we propose a fast motion estimation algorithm using adaptive elimination of sub-block partial coefficients. The proposed algorithm predicts an adaptive threshold for each sub-block by using relationship of an initial sum of absolute difference(SAD) and a minimum SAD at the current point, and efficiently reduces unnecessary calculation time of the conventional partial distortion elimination(PDE) algorithm with the predicted threshold. Our algorithm reduces about 60% of computations of the conventional PDE algorithm without any degradation of prediction quality compared with the con ventional full search. Additionally, the proposed algorithm can be applied to other fast motion estimation 떠gorithms. the proposed Our proposing algorithm will be useful to real-time video coding applications using MPEG-2 or MPEG-4 AVC standards.

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.258-266
• /
• 2015

Xanthine Oxidase is an enzyme, which oxidizes hypoxanthine to xanthine, and xanthine to uric acid. It is widely distributed throughout various organs including the liver, gut, lung, kidney, heart, brain and plasma. It is involved in gout pathogenesis. In this study, we have performed Comparative Molecular Field Analysis (CoMFA) on a series of 2-(indol-5-yl) thiazole derivatives as xanthine oxidase (XO) inhibitors to identify the structural variations with their inhibitory activities. Ligand based CoMFA models were generated based on atom-by-atom matching alignment. In atom-by-atom matching, the bioactive conformation of highly active molecule 11 was generated using systematic search. Compounds were aligned using the bioactive conformation and it is used for model generation. Different CoMFA models were generated using different alignments and the best model yielded a cross-validated $q^2$ of 0.698 with five components and non-cross-validated correlation coefficient ($r^2$) of 0.992 with Fisher value as 236.431, and an estimated standard error of 0.068. The predictive ability of the best CoMFA models was found to be $r^2_{pred}$0.653. The CoMFA study revealed that the $R_3$ position of the structure is important in influencing the biological activity of the inhibitors. Electro positive groups and bulkier substituents in this position enhance the biological activity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1663-1674
• /
• 2012

In this paper, we propose a new watermarking technique for copyright protection of stereo image. The proposed technique embeds watermark to the region which corresponds to occlusion of the disparity map to be extracted by the proposed stereo matching and the frequency coefficient with the appropriate value. We use discrete wavelet transform for frequency transform tool. The proposed algorithm consists of stereo matching, watermark rearrange, mark space selection, and watermark embedding/extracting. We tested the experiment about 4 stereo images which are from Middlebury site. We embedded the watermark to 4 stereo images and extracted it from the images after attacks. We also visually analyzed the watermark embedding images in 3D TV environment.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.60-65
• /
• 2010

This paper describes the results of 2D mapping, feature detection and matching to create the surrounding environment in the mounted stereo camera on Mobile robot. Extract method of image's feature in real-time processing for quick operation uses the edge detection and Sum of Absolute Difference(SAD), stereo matching technique can be obtained through the correlation coefficient. To estimate the location of a mobile robot using ZigBee beacon and encoders mounted on the robot is estimated by Kalman filter. In addition, the merged gyro scope to measure compass is possible to generate map during mobile robot is moving. The Simultaneous Localization and Mapping (SLAM) of mobile robot technology with an intelligent robot can be applied efficiently in human life would be based.

• Journal of Biomedical Engineering Research
• /
• v.18 no.4
• /
• pp.357-364
• /
• 1997

The early detection of breast cancer is clearly a key ingredient for reducing breast cancer mortality. Microcalcification is the only visible feature of the DCIS's(ductal carcinoma in situ) which consist 15 ~ 20% of screening-detected breast cancer. Therefore, the analysis of the shapes and distributions of microcalcifications is very significant for the early detection. The automatic detection procedures have b(:on the concern of digital image processing for many years. We proposed here one efficient method which is essentially statistical pattern classification accelerated by one representative feature, correlation coefficient. We compared the results by this additional feature with results by a simple gray level thresholding. The average detection rate was increased from 48% by gray level feature only to 83% by the proposed method The performances were evaluated with TP rates and FP counts, and also with Bayes errors.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.962-971
• /
• 2016

A wireless power transfer (WPT) system is generally designed with the optimum source and load impedance in order to achieve the maximum power transfer efficiency (PTE) at a specific coupling coefficient. Empirically or intuitively, however, it is well known that a high PTE can be attained by adjusting either the source or load impedance. In this paper, we estimate the maximum achievable PTE of WPT systems with the given load impedance, and propose the condition of source impedance for the maximum PTE. This condition can be reciprocally applied to the load impedance of a WPT system with the given source impedance. First, we review the transducer power gain of a two-port network as the PTE of the WPT system. Next, we derive two candidate conditions, the critical coupling and the optimum conditions, from the transducer power gain. Finally, we compare the two conditions carefully, and the results therefore indicate that the optimum condition is more suitable for a highly efficient WPT system with a given load impedance.

• Journal of Integrative Natural Science
• /
• v.9 no.3
• /
• pp.190-198
• /
• 2016

Xanthine Oxidase is an enzyme, which oxidizes hypoxanthine to xanthine, and xanthine to uric acid. It is widely distributed throughout various organsincluding the liver, gut, lung, kidney, heart, brain and plasma. It is involved in gout pathogenesis. In this study, we have performed Comparative Molecular Field Analysis (CoMSIA) on a series of 2-(indol-5-yl) thiazole derivatives as xanthine oxidase (XO) inhibitors to identify the structural variations with their inhibitory activities. Ligand based CoMSIA models were generated based on atom-by-atom matching alignment. In atom-by-atom matching, the bioactive conformation of highly active molecule 11 was generated using systematic search. Compounds were aligned using the bioactive conformation and it is used for model generation. Different CoMSIA models were generated using different alignments and the best model yielded across-validated $q^2$ of 0.698 with five components and non-cross-validated correlation coefficient ($r^2$) of 0.992 with Fisher value as 236.431, and an estimated standard error of 0.068. The predictive ability of the best CoMSIA models was found to be $r{^2}_{pred}$ 0.653. The study revealed the important structural features required for the biological activity of the inhibitors and could provide useful for the designing of novel and potent drugs for the inhibition of Xanthine oxidase.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.2
• /
• pp.63-69
• /
• 2022

PURPOSE. The aim of this in vitro study was to investigate the accuracy (trueness and precision) of five intraoral scanners (IOS) using a novel reference model for standardized performance evaluation. MATERIALS AND METHODS. Five IOSs (Medit i500, Omnicam, Primescan, Trios 3, Trios 4) were used to digitize the reference model, which represented a simplified full-arch situation with four abutment teeth. Each IOS was used five times by an experienced operator, resulting in 25 STL (Standard Tessellation Language) files. STL data were imported into 3D software (Final Surface^®) and examined for inter- and intra-group analyses. Deviations in the parameter matching error were calculated. ANOVA F-test and Kruskal-Wallis test were applied for inter-group comparisons (α = .05); and the coefficient of variation (CV) was calculated for intra-group comparisons (in % ± SD). RESULTS. Primescan (matching error value: 0.015), Trios 3 (0.016), and Trios 4 (0.018) revealed comparable results with significantly higher accuracy compared to Medit i500 (0.035) and Omnicam (0.028) (P < .001). For intra-group comparison, Trios 4 demonstrated the most homogenous results (CV 15.8%). CONCLUSION. The novel reference model investigated in this study can be used to assess the performance of dental scanning technologies in the daily routine setting and in research settings.