• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.747-752
• /
• 1996

In this paper, we propose a new SO-MLSE(soft-output maximum likelihood sequence estimation) equalizer, which can be used in GSM digital cellular system) it uses complex correlation of training sequence to obtain the channel information and the equalization is performed by MLSE using Viterbi algorithm. In order to generate a soft-decision input to channel decoder (Viterbi decoder), the soft-output equalization algorithm is needed. The adopted algorithm doesn't require to modify the structure of HO-MLSE(hard output MLSE) equalizer, that is, SO-MLSE equalizer can be implemented by adding soft-output generation block to HO-MLSE equalizer. This algorithm uses the outputs of matched filter and HO-MLSE equalizer. It turns out that the complexity of proposed SO-MLSE equalizer is simpler than those of other SO-MLSE equalizer and its perforance is almost the same as those of others. Finally, the proposed SO-MLSE equalizer is also implemented s a prototype with ADSP-2101 16-bits fixed point digital signal processing chip.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.4
• /
• pp.360-366
• /
• 2005

In the past, when there were few vehicles on the road, the T.O.D.(Time of Day) traffic signal worked very well. The T.O.D. signal operates on a preset signal cycling which cycles on the basis of the average number of average passenger cars in the memory device of an electric signal unit. Now days, with increasing many vehicles on restricted roads, the conventional traffic light creates startup-delay time and end-lag-time. The conventional traffic light loses the function of optimal cycle. And so, $30-45\%$ of conventional traffic cycle is not matched to the present traffic cycle. In this paper we proposes electro sensitive traffic light using fuzzy look up table method which will reduce the average vehicle waiting time and improve average vehicle speed. Computer simulation results prove that reducing the average vehicle waiting time which proposed considering passing vehicle length for optimal traffic cycle is better than fixed signal method which doesn't consider vehicle length.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.40-47
• /
• 2010

This paper presents a simultaneous localization and mapping (SLAM) of an indoor hallway environment using Rao-Blackwellized particle filter (RBPF) along with a line segment as a landmark. Based on the fact that fluent line features can be extracted around the ceiling and side walls of hallway using vision sensor, a horizontal line segment is extracted from an edge image using Hough transform and is also tracked continuously by an optical flow method. A successive observation of a line segment gives initial state of the line in 3D space. For data association, registered feature and observed feature are matched in image space through a degree of overlap, an orientation of line, and a distance between two lines. Experiments show that a compact environmental map can be constructed with small number of horizontal line features in real-time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.1076-1083
• /
• 2000

Vehicle license plate recognition identifies vehicle as a unique, and have many applications in traffic monitoring field. In this paper, a vertical edge based algorithm to extract license plate within input gray-scale image is proposed. A size-and-shape filter based on seed-filling algorithm is applied to remove the edges that are impossible to be the vertical edges of license plate. Then the remaining edges are matched with each other according to some restricted conditions so as to locate license plate in input image. After license plate is extracted. normalized and segmented, the characters on it are recognized by template matching method. Experimental results show that the proposed algorithm can deal with license plates in normal shape effectively, as well as the license plates that are out of shape due to the angle of view.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.607-613
• /
• 2007

Most signal-to-noise ratio (SNR) estimation techniques in digital communication channels derive the SNR estimates solely from samples of the received signal after the matched filter. They are based on symbol SNR and assume perfect synchronization and intersymbol interference (ISI)-free symbols. In severe channel distortion where ISI is significant, the performance of these estimators badly deteriorates. We propose an SNR estimator which can operate on data samples collected at the front-end of a receiver or at the input to the decision device. This will relax the restrictions over channel distortions and help extend the application of SNR estimators beyond system monitoring. The proposed estimator uses the characteristics of the second order moments of the additive white Gaussian noise digital communication channel and a linear predictor based on the modified-covariance algorithm in estimating the SNR value. The performance of the proposed technique is investigated and compared with other in-service SNR estimators in digital communication channels. The simulated performance is also compared to the Cram$\acute{e}$r-Rao bound as derived at the input of the decision circuit.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.69-72
• /
• 2002

In this paper, adaptive minimum mean-squared error (MMSE) multiuser detector combined with decision-feedback detector (DFD) is considered fur near-far resistant DS-CDMA system. To provide a reliable input to the adaptive MMSE detector, multiple-access interference (MAI) is regenerated using bit estimates from DFD and subtracted from the received signal. In the adaptive MMSE detector, the effect of the imperfect cancellation is compensated by a least mean square (LMS) algorithm. Through the numerical results, it is shown that, in a near-far situation, the proposed scheme provides superior performance to the matched filter (MF) receiver, adaptive MMSE detector, and DFD in terms of the bit error rate (BER).

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.205-208
• /
• 2002

최근 영상 회의 시스템에서 화자 위치 추정 및 음질 향상 기술이 연구되고 있다. 이 시스템에서는 마이크로폰 어레이를 이용하여, 화자의 위치를 파악하여 화자의 방향으로 카메라를 자동으로 조정해 주고 그 방향으로부터 입사되는 신호만을 수신할 수 있도록 한다. 이를 위해 마이크로폰 어레이가 연구되어져 왔다. 덜 연구에서는 시간에 따라 변화하는 음향 환경에 적응하는 적응 정합 필터 마이크로폰 어레이를 제안하고, 실험을 통해 그 성능을 고찰하였다.

• Journal of Communications and Networks
• /
• v.8 no.3
• /
• pp.323-329
• /
• 2006

For orthogonal frequency division multiplexing (OFDM), the discrete Fourier transform (DFT)-based processing at the receiver has been perceived equivalent to the matched filter (MF)-based processing. In this paper, we revisit the equivalence and mathematically show that when the guard interval is insufficient, the well-known DFT-based processing inherently causes more intersymbol and interchannel interference (ISI/ICI) than the MF-based processing. Then, with the adverse increase of interference, analytical expressions for the link performance are derived in terms of bit error rate (BER). Numerical results from computer simulation and analysis are presented to justify our claims.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.3
• /
• pp.260-268
• /
• 1990

This paper investigates the design of a frequency hopping FSK tranceiver system, where the system enhancements are made in the following three aspects: dual frequency synthesiszation for the increased hopping rate, linearization of VCO gain in PLL to improve BFSK modulation characteristics, and fast code synchronization by the matched filter method.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.2
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.