• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1667-1674
• /
• 2012

Objective: To explore the differential protein expression profile in EC304 gastric cancer cells induced by alphastatin. Methods: Cultured EC304 cells in the exponential phase of growth were randomly divided into alphastatin and control groups. Total proteins were extracted and the two dimensional electrophoresis (2-DE) technique was applied to analyze differences in expression with ImageMaster 2D Platinum 5.0 software. Proteins were identified using the MASCOT database and selected differently expressed proteins were characterised by western blotting and immunofluorescence. Results: $1350{\pm}90$ protein spots were detected by the ImageMaster software in the 2-DE gel images from the control and alphastatin groups. The match rate was about 72-80% for the spectrum profiles, with 29 significantly different protein spots being identified, 10 upregulated, 16 downregulated, two new and one lost. The MASCOT search scores were 64-666 and the peptide matching numbers were 3-27 with sequence coverage of 8-62%. Twenty-three proteins were checked by mass spectrometry, including decrease in Nm23 and profilin-2 isoform b associated with the regulation of actin multimerisation induced by extracellular signals. Conclusion: The proteome in EC304 cells is dramatically altered by alphastatin, which appears to play an important role in modulating cellular activity and anti-angiogenesis by regulating protein expression and signal transduction pathways through Nm23 and profilin-2 isoform b, providing new research directions for anti-angiogenic therapy of gastric cancer.

• Progress in Superconductivity
• /
• v.11 no.2
• /
• pp.123-127
• /
• 2010

The properties of buffer layer for thermal and chemical stability in coated conductor is a very important issue. $CeO_2$ has desirable thermal and chemical stability as well as good lattice match. In this study, $CeO_2$ was deposited by electron beam deposition. The MgO(001) single crystal and LMO buffered IBAD substrate(LMO/IBAD-MgO/$Y_2O_3/Al_2O_3$/Hastelloy) were used as substrates, which have $\Delta\phi$ values of ${\sim}8.9^{\circ}$. The epitaxial $CeO_2$ films was deposited with high deposition rate of $12{\sim}16\;{\AA}/sec$. During deposition, the change of oxygen partial pressure(${\rho}O_2$) does not cause change in c-axis texture. In case of $CeO_2$ on MgO single crystal, the substrate temperature was optimized at $750^{\circ}C$ with superior $\Delta\phi$ and $\Delta\omega$ value. Otherwise, In case of LMO buffered IBAD substrate, It was optimized at $650^{\circ}C$ with increasing its deposition thickness of $CeO_2$, which was finally obtained with best $\Delta\phi$ value of $5.5^{\circ}$, $\Delta\omega$ value of $2^{\circ}$ and Ra value of 2.2 nm.

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2006

This paper presents an efficient face recognition method using both first moment of image and eigenvector. First moment is a method for finding centroid of image, which is applied to exclude the needless backgrounds in the face recognitions by shitting to the centroid of face image. Eigenvector which are the basis images as face features, is extracted by principal component analysis(PCA). This is to improve the recognition performance by excluding the redundancy considering to second-order statistics of face image. The proposed methods has been applied to the problem for recognizing the 60 face images(15 persons *4 scenes) of 320*243 pixels. The 3 distances such as city-block, Euclidean, negative angle are used as measures when match the probe images to the nearest gallery images. In case of the 45 face images, the experimental results show that the recognition rate of the proposed methods is about 1.6 times and its the classification is about 5.6 times higher than conventional PCA without preprocessing. The city-block has been relatively achieved more an accurate classification than Euclidean or negative angle.

• Journal of Biosystems Engineering
• /
• v.42 no.1
• /
• pp.56-61
• /
• 2017

Purpose: High energy requirement and long cooking time are limiting consumption of pigeon pea (Cajanus cajan), a nutritious food. This study was performed to estimate energy and time demand by different methods of cooking pigeon pea. Methods: Pigeon pea (150 g) was soaked in 2.0 L of water at ambient temperature ($29{\pm} 2^{\circ}C$) to determine hydration behavior. Cooking experiments were conducted using aluminum and pressure-cooking pots. Efficiency of cooking was evaluated using four types of cooking appliances (kerosene, liquefied petroleum gas (LPG), electric, and charcoal stoves). Normal (continuous heating until the food was satisfactorily cooked) and control (controlling the energy input to closely match the actual energy required) cooking were conducted. Energy requirement and duration of cooking were determined using standard procedures. Results: Soaking increased moisture content from 11.99 to 30.01% in 90 min, while water absorption rate decreased with soaking duration. In cooking 150 g of pigeon pea using kerosene stove, presoaked normal pressure-pot cooking method consumed the least energy (10 800 kJ) and time (205 min), while unsoaked normal cooking consumed the highest energy (18 450 kJ) and time (336 min). Using LPG stove, unsoaked normal cooking method required the highest energy (52 470 kJ), while presoaked control pressure-pot required the least energy (14 405 kJ). For electric stove, the lowest energy (15 560 kJ) and shortest duration (105 min) were recorded during control cooking of presoaked sample in the pressure-pot. Conclusions: Control cooking was not practicable using charcoal stove. Generally, kerosene stove consumed the least energy, while electric stove was found to have the shortest duration of cooking.

• Journal of Biomedical Engineering Research
• /
• v.31 no.4
• /
• pp.321-327
• /
• 2010

Most of the ear shells of hearing aids are manufactured manually, and it is one of the reasons that the cost of the custom-made hearing aids can be increased. Thus it is required to manufacture the ready-made ear shell for the purpose of easy manufacturing and decrease in cost. In this study, we extract parameters in order to manufacture the ready-made ear shell for CIC type hearing aids and simulate to reconstruct the ear shell using the extracted parameters. To parameter extraction, we set up the eleven parameters for the ready-made ear shell based on anatomical characteristics of the ear canal, and we found values of the parameters from twenty-one impressions in their 20s and twelve impressions in their 60s using aperture detection and feature detection algorithms. Classifying the parameters by size, we also determine the parameters of ready-made ear shell into three types for people in their 20s and two types for people in their 60s. Each ready-made ear shell was simulated to reconstruct using figured parameters, and evaluated the rate of agreement with unused impressions for setting parameters. To evaluate the ready-made ear shell, we calculate the volume ratio and intersection between of the each impression and ready-made ear shell, and the intersection ratio using the intersection volume and ready-made ear shell volume. As a result, the volume ratio was about 70%, and volume match ratio was also up to 70%. It means that the ready-made ear shell we simulated is the significantly matched to impression.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.04a
• /
• pp.70-79
• /
• 2003

Paper coating can give smoothness surface and good printability to uncoated paper. Macro roughness of base paper would be decreasing its groove and grit in view of side. Nevertheless its improving effect for paper, some kind of problem is showing in the fine coated paper. Especially, back trap mottle is one of serious problems in printing with fine coated paper. Printers can not adjust conditions to overcome the problem. Also large amounts of paper can be rejected. There are many factors that influence back trap mottle. However it is not clear what the important parameters are in back trap mottle. Back trap mottle has some relationship with ink setting but good guidelines are not clear. Back trap mottle has been linked to non-uniform ink setting. We do not know how much variation in setting we can tolerate. Other mottle issues such as micro-picking and ink refusal are still common. This paper was prepared to identify correlation with ink setting and delta ink density obtained from experiment and then tried to find out some relationships with ink setting and back trap mottle. Basically fine calcium carbonate and ciay was used for main components and coarse calcium carbonate was mixed in two fine pigments to change its porosity and ink acceptance. Micro ink tack force at KRK printing tester was adapted to measure ink setting rate. KRK units were used for back trap mottle simulation and two printed samples were prepared to check delta ink density. Clay base coating has more fast ink setting time than calcium carbonate's though smoothness of clay was better than calcium carbonate. It could be explained by that clay has finer pore in its coating than calcium carbonate. DID(delta ink density) has shown a good correlation with ink setting time from micro ink tack. The total pore volume of coating layer did not match with ink setting and DID. From the results we might conclude coating that has fine pore size around 0.05 ${\mu}m$ can be exposed to high possibility of back trap mottle.

• Archives of Reconstructive Microsurgery
• /
• v.18 no.2
• /
• pp.41-48
• /
• 2009

There are several advantages for groin flap, but its small and unpredictable vessels of pedicle have made it to lose its initial popularity. Although it would be ideal flap when it is focused on its useful advantages such as relative larger size, low donor site morbidity and possible bone graft, there have been few studies for prognostic factors for successful groin flap. Authors intended to determine prognostic factors which are relative with success of free groin flap. From January 1985 to December 2007, 107 patients who underwent groin flap for reconstruction of extremities were selected consecutively. Univariate and multivariate analysis were performed to determine prognostic factors which were related with success of groin flap. Eighty of 107 (74.8%) flaps survived. There was significant difference in success rate according to the recipient site. Nineteen of 20 cases (95%) survived in upper extremities, but 61 of 87 cases (70.1%) survived in lower extremities, which was statistically significant (p=0.022). Univariate analysis showed that mean diameter of donor veins was significantly larger in success group (p=0.021). Groin flap is recommended for reconstruction of upper extremities than lower extremities. It is thought to be critical that surgeons try to match vessel diameters between donor and recipient site.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.247-254
• /
• 2004

We introduce a new space-time signal processing scheme that uses both transmitter diversity technique and transmitter beamforming technique for code-division multiple access (CDMA) systems. Over complex Gaussian Rayleigh channel, the introduced scheme achieves the diveristy gain through the transmitter diversity technique. and the SNR gain by th transmitter beamforming technique. Bit error rate (BER) analyses are given to each of the three cases in which the transmitter diversity scheme, the transmitter beamforming scheme and the introduced scheme are used, in the slowly varying Rayleigh frequency nonselective fading channel. The Monte-Carlo simulation results are shown to match to the analytic results. When the channels between distant antennas are independent, analytic results show that the introduced scheme achieves the lowest $E_{b/}$ $N_{0}$ at target BER 10$^{-6}$ . When the channels between distant antennas are correlated, analytic and simulation results show that the introduced scheme is more robust to the change of channel correlation.n.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.389-395
• /
• 2013

More sales of food and beverage coupons have been made using SNS on social commerce recently. If one buys coupons on social commerce, he/she can enjoy products at a lower price; however, there are drawbacks that one must consider such as location, service hours, and discount rate. Thus, this paper suggests a system that recommends food and beverage coupons on social commerce for users that considers a user's personal context of location, time, and purchase history. In order to reflect a user's context awareness and continuous preference, this paper suggests a method based on the Bayesian network. In order to reflect personalized weighting on the standard of coupon selection to match a user's preference, a measurement and classification of weighting preferences is performed on the basis of AHP. 20 experiments in one month involving 12 students were carried out to verify the effectiveness of the system, resulting in an 80% satisfaction level.

• Journal of the Korean Geographical Society
• /
• v.44 no.3
• /
• pp.339-354
• /
• 2009

The purposes of this study are to identify many implications of commuting regional type according to the features of foreigner commuting. Research on the pattern of distribution of foreigners has been very simple and limited because foreigners usually lived together in a specific area, and their workplace often tended to be their residence. However they currently live dispersed more Widely, and their job and housing increasingly tend to be mismatched. This study divided areas inhabited by foreigners into general one characterized by job-housing match and exceptional one characterized by job-housing mismatch, and then examined the features of foreigner commuting. General commute type showed a high rate of intra area commute and foreign workers' universal features. Inflow commute type showing high E/R ratio. In these areas, outflow commuters had a short journey to work while inflow commuters had relatively a long journey to work, and professionals accounted for a high proportion of employees. Outflow commute type showing low E/R ratio. In these areas, outflow commuters had a long journey to work while inflow commuters had a relatively short journey to work. The composition ratio of three commute types was different according to nationality and visa type.