• 제목/요약/키워드: Mat Foundation

검색결과 131건 처리시간 0.03초

무다짐 콘크리트를 이용한 두께 3.5m인 대형 Mat 기초의 시공 (An Application of Mat Foundation using Self Compacting Concrete)

  • 손유신;이승훈;박찬규;김규동
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.979-984
    • /
    • 2002
  • The mat foundation of Tower Palace III is designed as a massive structure which has a 3.5m depth. The purpose of this study is to determine the optimum mix design having good workability and to control the actual concrete quality in site. For this purpose, we select the Self Compacting Concrete. Recently, the Self Compacting Concrete has been applied to achieve workability improvement. As the result of actual application, we have finished placing the mass concrete of 8, 000m$^3$ during 14hours with good success and obtain the good quality concrete. All test results are satisfied with our specifications for mat foundation and cut cost as the reduction of placing hours.

  • PDF

지반의 상호작용을 고려한 전면기초의 해석기법 개발 (Development of Analysis Method for Mat Foundations Considering Coupled Soil Springs)

  • 이재환;정상섬;이준규
    • 한국지반공학회논문집
    • /
    • 제30권12호
    • /
    • pp.41-49
    • /
    • 2014
  • 본 연구에서는 기존 근사해석 프로그램의 간편함을 유지하면서 보다 정밀성이 확보된 3차원 근사해석기법(YS-MAT)을 개발하였다. 전면기초는 6개의 자유도를 가진 평면쉘 요소로 모델링하여 기초의 연성거동을 고려할 수 있도록 하였으며, 지반스프링의 상호작용을 고려할 수 있도록 하였다. 기존의 해석기법, 유한요소해석 및 현장계측값과의 비교 분석 결과, 본 해석기법이 대단면 전면기초의 침하 거동을 비교적 정확히 산정하는 것으로 판단되며, 이러한 검증을 토대로 실제 전면기초 예비설계에 적용 가능함을 확인할 수 있었다.

회귀분석을 이용한 단순화된 연성법에 의한 전면기초의 설계 (Design of Mat Foundation by Simplified Flexible Method Using Regression Analysis)

  • 문경태;박상렬
    • 대한토목학회논문집
    • /
    • 제35권1호
    • /
    • pp.153-164
    • /
    • 2015
  • 전면기초의 설계 방법은 사용되는 가정에 따라 강성법과 연성법으로 구분된다. 강성법에서는 전면기초가 무한 강체이며 기초저면의 접지압 분포를 평면형으로 가정한다. 그러나 실제 기초는 강체가 아니므로 접지압이 평면형이 아닌 곡면형인 경우가 대부분으로, 강성법를 적용하는 것은 정밀한 해석이 될 수 없으며 발생되는 오차를 감수해야 한다. 한편, 연성법에서는 전면기초를 탄성지반 위에 놓인 판으로 생각하는데, 이 탄성판이론은 탄성지반 위에 무한 폭을 가진 평판에 집중하중이 작용하는 경우에 해당한다. 그런데 연성법에 의해 구하려는 모멘트, 전단력, 처짐 함수식은 매우 복잡하여 설계자가 이용하는데 많은 어려움이 있다. 또한 구조물 기초설계기준에서 복잡한 수식대신 설계를 위해 제공되는 그래프는 최대모멘트나 최대전단력을 나타내는 위험단면에서 그 함수값을 포함하고 있지 않아 이를 활용할 수 없다. 따라서, 본 연구에서는 연성법을 설계자가 보다 쉽게 이용하기 위해 회귀분석을 통하여 모멘트와 전단력, 처짐의 단순화된 함수식을 제안하였으며, 제안된 함수식들은 매우 단순화되어 활용하기 쉽고 매우 정확한 값을 제공하고 있다.

매트기초 건설을 위한 양생방법 선정시스템 (Curing Method Designation System in Mat Foundation Construction)

  • 이태규
    • 한국콘텐츠학회논문지
    • /
    • 제12권8호
    • /
    • pp.366-372
    • /
    • 2012
  • 매트기초 건설공사를 포함한 대부분의 건설공사에서 구조물 가설 초기단계에서의 안전사고 방지는 매우 중요한 요소이다. 안전사고의 위험성을 감소시키기 위하여서는 콘크리트 타설 이후 안전한 거푸집 작업과 적절한 양생의 종류를 선택하는 양생방법의 선정이 무엇보다도 중요하다. 이에 따라 본 논문은 비정상상태의 수화열 해법을 통하여 매트기초 건설을 위한 적절한 양생방법 및 양생시기를 선정하는 알고리즘을 개발하였다. 이를 위하여 균열지수에 주안점을 둔 구조해석 시스템을 통한 사용자 중심의 OOP 루틴을 적용하였다. 이에 따라 콘크리트 가설 초기의 거푸집 공사에 따른 위험요소를 미연에 방지할 수 있는 안전한 양생방법 선정이 시스템적으로 가능하게 된다.

전면기초-하부암반 접촉면의 영향분석 (Analysis of Mat Foundation by Considering Interface with Rock Mass)

  • 이재환;조재연;이성준;정상섬
    • 한국지반공학회논문집
    • /
    • 제26권8호
    • /
    • pp.39-47
    • /
    • 2010
  • 최근 국내 외에서 초장대 교량 및 초고층 건물의 시공이 증가하고 있으며, 지반공학적인 측면에서 상부 구조물로 부터 전달되는 큰 하중을 안전하게 지지할 수 있는 대단면 기초의 설계와 시공이 요구되고 있다. 이에 본 연구에서는 연암지반에 실제 시공된 상부 구조물에서 전달되는 수직하중을 받는 전면기초의 거동분석을 위하여 3차원 유한요소 해석을 실시하였다. 해석 시 기초와 지반사이의 접촉면 유 무에 따른 거동을 비교 분석하였으며, 동일한 단면의 기초의 거동을 기초와 지반사이의 상대변위가 연암보다 더 크게 발생할 것으로 예상되는 풍화암 지반조건에서도 분석하였다. 또한 전면기초의 두께를 변화시켜 강성기초와 연성기초의 거동특성을 파악하였다. 본 연구 결과, 접촉면의 거동을 고려하지 않은 해석의 경우 기초의 침하량, 단면에 발생하는 인장응력 및 휨모멘트가 크게 산정되는 것으로 판단되었으며, 그 결과 접촉면의 거동을 고려하지 않을 경우 과다설계에 대한 우려가 있는 것으로 평가하였다.

강성(剛性)이 다른 다층토(多層土) 지반(地盤)의 변형(變形) 및 응력전달(應力傳達) (Deformation and Stress Distribution on Multi-Layered Foundation with Different Rigidity)

  • 박병기;장용채;박종천;박선배
    • 대한토목학회논문집
    • /
    • 제12권2호
    • /
    • pp.205-215
    • /
    • 1992
  • 본문은 점토지반에 기초를 통해 하중이 전달 될 경우 기초의구조(강성기초 및 요성기초), Geotextile, Sand Mat, 다층구조의 지반 등이 점토 기초지반에 어떤 거동을 일으키는가를 모형재하시험을 통해 관찰하고 수치계산을 시도한 것이다. 총 14개의 시험을 통해 수직, 수평변위를 기초형태별, 기초처리별, 강성차이별로 고찰하고 이들 변형을 예측하는 프로그램을 통해 변형과 응력을 예측하였다. 그 결과는 지반지지력은 강성기초가 유리하지만 이보다는 지반 강성이 큰 다층 구조지반이 가장 유리하며 수평, 수직, 변위에 대해서는 G/T, S/M의 병용공법이 가장 유리하고 S/M 공법만 단독으로 이용할 경우는 연직변위 억제 효과가 탁월하다. 그리고 강성이 큰 다층구조 지반은 이를 G/T와 S/M의 병용공법과 같은 효과가 있다. 본 연구결과는 강성이 큰 지반(여기서는 Rubber층)이 상층에 있고, 두께 또한 두꺼울수록 지반의 침하가 크게 억제되는 것을 확인하였다. 측방변위에서도 강성차이도 중요하지만, 이보다는 강성지반의 두께에 더 깊은 관계가 있다. 모형 토조실험을 통한 실측치와 수치해석 결과가 연직변위에 대해서는 서로 좋은 결과를 나타내 다층토 지반의 침하예측이 가능하다.

  • PDF

국내외 초고층 건축물의 대단면 매트기초 시공사례와 분석 (Case Study on Mega Foundations of Domestic and Foreign Super High-Rise Buildings)

  • 박영석;이해출;김경민;조창식;임홍철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
    • /
    • pp.17-19
    • /
    • 2010
  • This paper describes the possibility of the raft thickness reduction for mega foundations system of super high-rise buildings through a case study on domestic and foreign super high-rise buildings. In case of super high-rise buildings, the size of foundations, especially raft becomes wider and deeper because of heavy upper load. It is difficult to pour concrete of this kind of mega foundation, and cracks by hydration heat could happen. Therefore, there are several ways to reduce the raft thickness of mega foundations. Piled-raft could be the one because moment and shear load that the raft subjects on by soil reaction are lower. The effect of the piled-raft foundation on the raft thickness reduction could be confirmed by comparison of super high-rise buildings with pile, piled-raft and mat foundation. Furthermore, it was showed that the raft thickness could be more reduced by locating piles right under the vertical members of super structures.

  • PDF

개량연약지반의 모형실험과 변형해석 (II) (Model Test and Deformation Analysis of the Improved Soft Foundation( Il))

  • 이진수;이문수
    • 한국농공학회지
    • /
    • 제36권4호
    • /
    • pp.73-86
    • /
    • 1994
  • Ths paper was aimed to investigate the effect of reinforcement for the deformation characteristics of clayey foundation. Among numerous improvement method of foundation, only geotextil-reinforced foundation and foundation with both geotextile and sand mat which were 2-dimensional model clayey foundations were selected for load test in order to obtain fundamental results in analizing the behavior of the foundation with geotextile. To scrutinize the behavior characteristics and effect of reinforcement, the model foundations were constructed with various conditions on the location of layout of geotextile, the number of layouts and the depth of sand mat As for the technique of the numerical analysis elasto-plastic constitutive model for clayey soil, beam element for geotextile and elastic model for sand were respectively employed. Interface element was introduced for the block between materials with different rigidity. Observed values and numerical results were compared with satisfactory correspondence, which proved that the numercial technique developed in this paper was available.

  • PDF

Numerical analyses of soil-mat foundation and space frame system

  • Daniel Thangaraj, D.;Ilamparuthi, K.
    • Interaction and multiscale mechanics
    • /
    • 제5권3호
    • /
    • pp.267-284
    • /
    • 2012
  • In most of the design offices, analysis of the frame is carried out without considering the effect of the rigidity of mat. The analysis of the superstructure without modelling the foundation properly and conversely analysing the foundation system without considering the stiffness of the superstructure may mislead the estimation of the forces. This paper examines the parameters, which affect the interaction and they are grouped into relative stiffness factors ${\kappa}_{rs}$ and ${\kappa}_{sb}$. An interaction analysis is performed for the five storeyed space frame of 3 bays ${\times}$ 5 bays, using ANSYS finite element code. The soil was treated as an isotropic, homogenous and elastic half space medium and the following conclusions were drawn from the analyses. The differential settlement is reduced due to interaction and the performance of the mat depends on ${\kappa}_{sb}$ values. The moments $M_x$ and $M_y$ in the corner column at all the storey levels are higher in the case of the interaction analysis than in the conventional analysis. The axial forces in the peripheral columns increased and to that extent, the inner column axial loads are reduced. In the beam, more variation is seen in the support moments than in the span moments.