• Journal of Preventive Medicine and Public Health
• /
• v.41 no.3
• /
• pp.159-164
• /
• 2008

Objectives : The purpose of this systematic review was to investigate the association between dietary intake of citrus fruits and prostate cancer risk. Methods : Authors searched electronic databases and the reference lists of publications of diet and prostate cancer studies until August 2007. All of the epidemiological studies that obtained individual data on dietary intake of citrus fruits and presented risk estimates of the association between intake of citrus fruits and risk of prostate cancer were identified and included. Using general variance-based methods, study-specific odds ratios (OR)/ relative risk (RR) and associated confidence interval (CI)/ standard error (SE) for highest versus lowest intake of citrus fruits level were extracted from each paper. Results : Eleven articles including six case-control studies, one nested case-control study and four cohort studies, proved eligible. Overall summary OR using random effect model did not show an association in risk of prostate caner with intake of citrus fruits (summary OR=1.03, 95% CI=0.89-1.19) with large heterogeneity across studies that we were unable to explain ($I^2$=67.88%). The summary ORs in case-control studies and cohort studies were 1.10 (95% CI=0.97-1.22) and 1.05 (95% CI=0.96-1.14), respectively. Conclusions : Pooled results from observational studies did not show an association between intake of citrus fruits and the risk of prostate cancer, although results vary substantially across studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4552-4567
• /
• 2014

A (n,t,n) secret sharing scheme is to share a secret among n group members, where each member also plays a role of a dealer,and any t shares can be used to recover the secret. In this paper, we propose a strong (k,t,n) verifiable multi-secret sharing scheme, where any k out of n participants operate as dealers. The scheme realizes both threshold structure and adversary structure simultaneously, and removes a trusted third party. The secret reconstruction phase is performed using an additive homomorphism for decreasing the storage cost. Meanwhile, the scheme achieves the pre-verification property in the sense that any participant doesn't need to reveal any information about real master shares in the verification phase. We compare our proposal with the previous (n,t,n) secret sharing schemes from the perspectives of what kinds of access structures they achieve, what kinds of functionalities they support and whether heavy storage cost for secret share is required. Then it shows that our scheme takes the following advantages: (a) realizing the adversary structure, (b) allowing any k out of n participants to operate as dealers, (c) small sized secret share. Moreover, our proposed scheme is a favorable candidate to be used in many applications, such as secure multi-party computation and privacy preserving data mining, etc.

• Journal of Information Science Theory and Practice
• /
• v.4 no.3
• /
• pp.43-56
• /
• 2016

Introduction. Inadequate methods for acquiring user education could affect the level of library user education possessed by postgraduate students, and ultimately influence the purposes of their usage of e-resources provided in their university libraries. Despite the global acceptance that e-resources are contributing to postgraduate student’s research work, however, it has been documented that there is low use of e-resources in university libraries in Nigeria among postgraduate students. This drift could have negative consequences on their overall development. Therefore, this study determined how influential library user education is on the use of e-resources by postgraduate students in Nigerian university libraries.Methods. A survey research design and multi-stage sampling technique was adopted to select 2,726 from 54,578 postgraduate students from four faculties in 16 federal conventional universities in Nigeria. The data set was collected using a questionnaire and an interview schedule for e-resources librarians/system librarians and was analysed using percentage and Pearson’s product moment correlation.Results. The majority of the students were at the Master’s level (57.5%). The gender shows a ratio of 59.0% male and 41.0% female. Most Nigerian students enrol for postgraduate programmes in their thirties ‘30-39’ years. The use of e-resources by the postgraduates was low (weighted average of 2.45). The relationship between level of library user education and postgraduate students’ use of e-resources was positive, slightly strong, and significant (r = 318; df = 2284; p< .05).Conclusion. User education has positively inclined postgraduate students to the use of e-resources in their libraries. Therefore, libraries should employ all methods for acquiring user education for postgraduate students.

• Journal of Internet Computing and Services
• /
• v.7 no.6
• /
• pp.87-103
• /
• 2006

Advances in computer and network technology provide new computing environment that were only possible with supercomputers before. In order to provide the environment, a distributed runtime system has to be provided, but most of the conventional distributed runtime systems lack in providing dynamic and flexible system reconfiguration depending on workload variance, due to a static architecture of fixed master node and slave working nodes. This paper proposes and implements a new model for distributed job allocation and management which is a distributed runtime system is P2P environment for flexible and dynamic system reconfiguration. The implemented systems enables job program transfer and management, remote compile and execution among cooperative developers based on P2P standard protocol Jxta platform. Since it makes dynamic and flexible system reconfiguration possible, the proposed method has some advantages in that it can collect and utilize idle computing resources immediately at a needed time for distributed job processing. Moreover, the implemented system's effectiveness and performance increase are shown by applying and processing the crawler jobs, in a distributed way, for collecting a large amount of data needed for internet search.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.358-368
• /
• 2011

The aims of this article are to examine the basic law, contents and concept of counselling work for healthy family and provide the jobs and competency of healthy family supporter for counselling work. The research objects are 48 healthy family supporters for counselling work inclusive of full-time and part-time position. They are analyzed through the survey using questionnaire made by ministry of women and family and headquarter of healthy family support centers. The process of research consists of two parts. One is to suggest their jobs and requirements, the other is to offer their core competency and area for improvement. First, the jobs of healthy family supporters for counselling work are planning, performance and valuation consist of 29 items. A publicity activity of them is the work strengthened strategically. The requirements for the performance of their duties are having a master's degree, career for 3years, and a certificate of qualification of family counselor, healthy family supporters and social worker. Second, their competencies are understanding of the characteristic and life cycle of family, family law, education of family life, ability of documentation, data analysis, sensitivity of the change of family, society and environment, ability of solving the problem, attitude of the dignity of man, positiveness and so on.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.71-92
• /
• 1999

This study is to analyze the stress and displacement on the jaws during the bilateral and unilateral clenching task on three dimensional finite element model of the dentated skull. For this study, the computed tomography(G.E.8800 Quick, USA) was used to scan the total length of human skull in the frontal plane at 1.9mm intervals. The CAD data were extracted from the tomograms through digitizer(Summa Sketch III, USA) and then reconstructed by means of the spline method in the CAD program. In this project, a commercial software I-DEAS(Master Series ver-sion 3.0, SDRC Inc, USA) was used for three-dimensional stress analysis on the finite element model. which consists of articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. The results are as follows. ; 1. During the bilateral clenching, each major muscle forces caused high stresses on various areas of skull: masseter muscle on articular disc and teeth ; temporal muscle on mandible and periodontal ligament ; medial pterygoid muscle on the temporomandibular joint. During the unilateral clenching, masseter muscle induced the maximum stress ; medial pterygoid muscle the minimum stress. 2. During the bilateral clenching, higher compressive stresses on articular disc were generated by the masseter muscle and higher deformation occurred on the most front outer sites. And during the unilateral clenching, temporal muscle and medial pterygoid muscle exerted their forces to twist temporomandibular joint area of the balancing side and induced a higher compressive stresses on the front outer sites of articular disc. 3. During the bilateral clenching, the masseter muscle bended the mandible outwardly, and then caused tensile stresses on the lingual surface of mandibular symphysis. And the medial pterygoid muscle caused tensile stresses on the labial surface of mandibular symphysis. 4. When each muscles were simultaneously applied on jaws, a high stress and displacement took place on mandible rather than on the maxilla. Also, a high stress and displacement took place during the unilateral clenching rather than during the bilateral clenching.

• Physical Therapy Korea
• /
• v.14 no.1
• /
• pp.55-63
• /
• 2007

This study was designed to examine the relationship between clinical symptoms, self-efficacy, and performance of women with osteoarthritis. It is a survey study of 60 women who were diagnosed as osteoarthritis and given medical treatments from September, 2005 to October, 2005 in hospital 'H' located in Yongin-si. For clinical symptoms, radiographs of the subjects' knees were taken and evaluated the pathology grade by the Kellgren-Lawrence grade. Pain and stiffness was measured by the measure of WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index), and functional reach test was measured in order to examine balancing abilities. Self-efficacy was measured by a tool which has revised the ASES (Arthritis Self-Efficacy Scale), and performance was measured by recording the difficulty of the WOMAC measurements themselves, and the time taken for 20 m walking, going up and down 9 stairs, and 5 sit-down and stand-up repetitions. The resulting differences in the other variables according to performance and the relationship between performance with variables are the following. First, an increase in pain in women with osteoarthritis led to decreased functional ability. Second, an increase in stiffness in women with osteoarthritis led to a decrease in functional ability. Third, a decrease in balance in women with osteoarthritis led to a decrease in functional ability. Fourth, a decrease in self-efficacy in women with osteoarthritis led to a decrease in functional ability. Fifth, the variables for estimating the performance by self-report were pain and self-efficacy. The variables for estimating the performance by recording the time taken was balance and self-efficacy. As a result factors such as pain, balance and self-efficacy in women with osteoarthritis were closely related to performance. Based on the results, it seems that physical therapy programs to decrease pain and to increase the balance in women with osteoarthritis, and psychological approaches to increasing self-efficacy are needed. I hope that the results of this study will be useful data for clinical management and intervention for women with osteoarthritis.

• Safety and Health at Work
• /
• v.11 no.2
• /
• pp.193-198
• /
• 2020

Background: Medical laboratory workers are frequently exposed to a wide range of chemicals. This exposure can have adverse effects on their health. Furthermore, a knowledge lack of the chemical risk increases the likelihood of exposure. The chemical risk assessment reduces the risk of exposure to hazardous chemicals and therefore, guarantees health and safety of the workers. Method: The chemical risk assessment was conducted using a modified INRS method, according to the new CLP Regulation, of 11 unit laboratories in a Moroccan medical laboratory. Observation of each workstation and analysis of safety data sheets are key tools in this study. Results: A total of 144 substances and reagents that could affect the health of the analytical technicians were identified. Among these products, 17% are concerned by the low priority risk score, with 55% concerned by the average priority risk score and 28% concerned by the high priority risk score. This study also enabled to better identify the chemical agents that have restrictive occupational exposure limit value and controls were conducted to this effect. On the basis of the results obtained, several corrective and preventive measures have been proposed and implemented. Conclusion: Risk assessment is essential to ensure the health and safety of workers and to meet regulatory requirements. It enables to identify all the risky manipulations and to adopt appropriate preventive measures. However, it is not a one-time activity but it must be continuous in order to master the changes and thus ensure the best safety of all.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.156-160
• /
• 2013

A study on compressive creep behavior of ACM rubber for automotive engine gasket was performed using TMA thermal analysis. From the results of isothermal measurements with constant load of 1 N at several different temperatures of 160, 180, 200, and $220^{\circ}C$, compressive creep data at the given temperatures were obtained, and therefrom, shift factor ($a_T$) and master curve at reference temperature of $160^{\circ}C$ were obtained using time-temperature superposition principle (TTSP). $C_1$ and $C_2$ of WLF (Williams-Landel-Ferry) equation were calculated through the WLF plot as -1.107 and 11.571, respectively. From this, life time of ACM rubber at $120^{\circ}C$ was predicted as about 24,000 hrs.

• Journal of Music and Human Behavior
• /
• v.9 no.2
• /
• pp.1-17
• /
• 2012

The purpose of this study was to analyze data regarding the effects of group music therapy with adolescents. 27 master's, doctorial theses and published articles between 2000 and 2012 were selected for meta analysis. Subjects, independent variables, dependent variables, and the number of session were used to compare the effectiveness of group music therapy program. 49 effect sizes using means and standard deviation from 27 studies were calculated. The results were as follows. The overall mean effect size was -0.14, which is small size effect, according to Cohen's ES interpretation criteria. The mean ES was influenced by the subjects(adolescents/maladjustment students/addictive students/students in facility), the ES of adolescents was the biggest. However there were no significant difference among subjects. During the independent variables(active music therapy/receptive music therapy/combined music therapy), combined music therapy showed the biggest efficacy. When results were sorted by the dependent variables (social/emotional/behavior/cognitive category), the ES of behavioral category was the biggest. However, there was no significant difference among them. The ES of 11~15 session was the most effective.