• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.6
• /
• pp.918-924
• /
• 1997

A method for measuring the accuracy of rotating objects was studied. Rotating axis errors are significant; such as the spindle error of a manufacturing machine which results in the surface roughness of machined work pieces. Three capacitance type displacement sensors were used to measure the rotating master ball position. The sensors were mounted to the three orthogonal points on the spindle axis. The measurement data were analyzed and shown for rotating spindle accuracy, not only for average roundness error but also for spindle volumetric positional error during the revolutions. This method is simple and economical for industrial field use with regular inspection of rotating machines using portable equipment. Measuring and analyzing time using this method takes only a couple of hours. This method can also measure microscopic amplitude and 3-dimensional direction of vibrating objects.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.50 no.3
• /
• pp.284-291
• /
• 2014

Finely-striate buccinum Buccinum striatissimum, a species of whelks, is caught mainly by pot in the eastern coastal waters of Korea. In order to determine the size selectivity of pot for the species, comparative fishing experiments were conducted near Yeongil Bay from June to September in 2003 using the dome-shaped pots with different five mesh sizes (17.1, 24.8, 35.3, 39.8, and 48.3 mm). The parameters of logistic equation were estimated by the SELECT (Share Each Length's Catch Total) method based on a multinomial distribution. The model with the estimated split parameter was found to fit the catch data best. The master selection curve was estimated to be s (R)=exp (13.044R-16.438)/[1 + exp (13.044R-16.438)], where R is the ratio of shell height to mesh size. The relative shell height of 50% retention was 1.260, and the selection range was 0.168. Enlargement in mesh size of the pot allows more small-sized whelks to escape.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.597-598
• /
• 2003

I. Objectives Endodontic success depends on thoroughly cleaned and completely obturated root canal system. Effective cleaning and obturation will be achieved by well shaped canal. Numerous methodologies evaluating the efficacy and safety of canal preparation has been developed and the use of micro-computed tomography(MCT) in endodontic research is one of the latest innovations. This scientific tools could overcome the inherent limitations of other methodologies, and possesses the ability to visualize morphological characteristics in a detailed and accurate manner without destruction of the tooth and offers reproducible data in all three dimensions. The purpose of this study was to determine the optimal master apical file size with less transportation and more efficiency in removing the infected dentin. For this purpose we evaluated the transportation of canal center and change of untouched area after preparation sequentially from ＃25 file through ＃40 file with 3 different instruments：Stainless steel(SS) K-type hand instruments(MANI, Japan), ProFile.04 instruments (Dentply Tulsa Dental, USA) and Lightspeed instruments(Lightspeed Technology, San Antonio, USA) using micro-computed tomography.(omitted)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.129-136
• /
• 1997

The automated ball indentation(ABI) test was utilized to develop a semi-nondestructive method for estimating the fracture toughness( $K_{JC}$ ) in the transition temperature range. The key concept of the method is that the indentation deformation energy to the load at which the mean ball-specimen contact pressure reaches the fracture stress is related to the fracture energy of the material. ABI tests were performed for the reactor pressure vessel(RPV) base and weld metals at the temperatures of-15$0^{\circ}C$~$0^{\circ}C$ and the fracture toughness (estimated $K_{JC}$ ) was calculated from the indentation load-depth data. For all steels the temperature dependence of the estimated fracture toughness was almost the same as that ASTM $K_{JC}$ master curve The reference temperatures( $T_{o}$)of the steels were determined form the estimated $K_{JC}$ versus temperature curves. The reference temperature was well correlated with the index temperature of 41J Charpy impact energy( $T_{41J}$).).).

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.26 no.1
• /
• pp.102-110
• /
• 2019

Purpose: This study aimed to investigate the effects of a nurse-led community comprehensive exercise program on the body composition, physical function, and health-related quality of life in elderly patients with osteoporosis. Method: The study was conducted with one group pretest-posttest design. A total of 57 elderly patients participated in 8 weeks of intervention. Data was analyzed with the SPSS ver. 23.0 using descriptive statistics and paired t-test. Results: At the end of the intervention, body mass index was significantly increased (t=2.93, p=.005), but right leg balance (t=2.40, p=.02) was significantly improved. In addition, the total Korean-Western Ontario and McMaster Universities Osteoarthritis Index (K-WOMAC) (t=3.48, p=.001), knee pain (t=2.61, p=.012), stiffness (t=2.53, p=.014), and physical function (t=3.51, p=.001) were significantly decreased. EuroQoL Visual Analogue Scale (EQ-VAS) scores (t=4.25, p<.001) were significantly improved. Conclusion: The nurse-led eight-week community comprehensive exercise program did not show desirable change in the body composition but was effective on the physical function and health-related quality of life for older people with osteoartritis.

• Journal of Information Science Theory and Practice
• /
• v.6 no.4
• /
• pp.17-27
• /
• 2018

This study assesses the psychological aspects which influence job satisfaction among library and information science professionals. The study is based on primary data collected from the library and information science professionals working in the higher education institutions of Jammu and Kashmir, India. In all 264 responses were collected, comprising 44.3% male respondents and 55.7% females. The majority, 74.2% of respondents, are under 45 years of age, while 67.4% of respondents have a master's degree in library and information science. Of the total respondents, 7.6% conceded to being incompetent, while 13.3% viewed their peers as incompetent. The majority, 25% of respondents, replied that the library profession is a thankless job and 70.8% of respondents viewed that they are emotionally attached to their profession, while at the gender level, compared to 75.5% females, 65% of male respondents admitted to being emotionally attached to their profession. The encouraging part is that 26.5% of respondents replied that they love doing their job beyond office hours and 75.8% of respondents replied that they would not seek voluntary retirement, while 41.7% of respondents showed willingness to continue working as library and information science professionals postretirement, if engaged.

• Journal of muscle and joint health
• /
• v.25 no.3
• /
• pp.205-217
• /
• 2018

Purpose: The purpose of this review was to analyze the characteristics and effectiveness of online-based intervention for infertile women. Methods: We established the PICO (Participant-Intervention-Comparison-Outcome) strategy and conducted a systematic review of 7 literatures retrieved from 3 electronic databases of Ovid-Medline, Ovid-Embase, and the Cochrane Library. Two investigators independently extracted the data and assessed the quality of included studies using Cochrane risk of bias. Results: The pregnancy outcome showed that higher total risk scores (TRS) about lifestyle behavior was significantly associated with lower chance of pregnancy (aHR 0.79, 95% CI 0.72~0.85). Stress was significantly decreased in experimental groups receiving online-based interventions (p<.05). Depression score was significantly lower in groups receiving additional interventions besides on-line interventions than those who used online-based intervention only. The other outcomes, including anxiety, self-efficacy, helpfulness of intervention, perceived social support, and knowledge scores were not significantly different within and between groups in overall. Characteristics of the interventions were heterogeneous. Conclusion: There is evidence that online-based intervention in infertile women enhances the pregnancy and reduces stress levels.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.5
• /
• pp.271-279
• /
• 2019

PURPOSE. The newest technologies for digital implant impression (DII) taking are developing rapidly and showing acceptable clinical results. However, scientific literature is lacking data from clinical studies about the accuracy of DII. The aim of this study was to compare digital and conventional dental implant impressions (CII) in a clinical environment. MATERIALS AND METHODS. Twenty-four fixed zirconia restorations supported by 2 implants were fabricated using conventional open-tray impression technique with splinted transfers (CII group) and scan with Trios 3 IOS (3Shape) (DII group). After multiple verification procedures, master models were scanned using laboratory scanner D800 (3Shape). 3D models from conventional and digital workflow were imported to reverse engineering software and superimposed with high resolution 3D CAD models of scan bodies. Distance between center points, angulation, rotation, vertical shift, and surface mismatch of the scan bodies were measured and compared between conventional and digital impressions. RESULTS. Statistically significant differences were found for: a) inter-implant distance, b) rotation, c) vertical shift, and d) surface mismatch differences, comparing DII and CII groups for mesial and distal implant scan bodies ($P{\leq}.05$). CONCLUSION. Recorded linear differences between digital and conventional impressions were of limited clinical significance with two implant-supported restorations.

• Health Policy and Management
• /
• v.29 no.1
• /
• pp.49-57
• /
• 2019

Background: The purpose of this study was to examine the cultural competence of nurses caring for foreign patients in general hospitals. Methods: The subjects are 308 nurses who work in general hospitals in Seoul and Gyeonggi-do. The data, collected using a structured questionnaire on cultural competence, coping strategy, multicultural experience, intercultural uncertainty, and intercultural anxiety, were analyzed using descriptive statistics, t-test, analysis of variance, Pearson's correlation analysis, and hierarchical multiple regression. Results: Cultural competence was significantly associated with marital status, level of education, type of ward, and number of cared foreign patients. In hierarchical multiple regression analysis, the level of cultural competence was significantly associated with married, master degree qualified, high level of coping strategy and multicultural experience, and low level of cultural uncertainty. Conclusion: The findings revealed the need for educational programs which can contribute to lower the intercultural uncertainty and to enhance coping strategies dealing with foreign patients. In addition, individual and organization efforts to provide opportunities to expand nurses' multicultural experience will affect nurses' cultural competence development.

• Journal of Technologic Dentistry
• /
• v.41 no.2
• /
• pp.81-86
• /
• 2019

Purpose: The purpose of the present study was to compare the internal fit of two different temporary restorations fabricated by dental CAD/CAM system and to evaluate clinical effectiveness. Methods: Composite resin tooth of the maxillary first molar was prepared as occlusal reduction(2.0mm), axial reduction(1mm offset), vertical angle(6 degree) and chamfer margin for a temporary crown and duplicated epoxy die was fabricated. The epoxy dies were used to fabricate provisional restorations by CAD/CAM milling technique or 3D-printing technique. The inner data from all crowns were superimposed on the master die file in the 'best-fit alignment' method using 3D analysis software. Statistical analysis was performed using a Wilcoxon's rank sum test for differences between groups. Results: It showed that the internal RMS(Root Mean Square) values of the additive group were significantly larger than those of other group. No significant differences in internal discrepancies were observed in the temporary crowns among the 2 groups with different manufacturing method. Conclusion: All the groups had the internal fit within the clinical acceptable range (< $50{\mu}m$). The continuous research in the future to be applied clinically for the adaptation of additive manufacturing technique are needed.