• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.79-82
• /
• 2009

This work presents a novel lighting technology based on a YAG:$Ce^{3+}$ phosphor converter with micro line lenticular structure, to accompany an array of bare LED chips on a board. This technology is especially effective in TFT-LCD backlight applications as it offers the advantages of high light radiation efficiency, low color deviation, uniform luminance distribution and compact backlight thickness. Additionally, the proposed configuration is low-cost, can be manufactured quickly, and can be mass-produced economically.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.271-275
• /
• 2001

We investigated preparation of 1-3 PZT composites for medical ultrasonic transducer array (briefly UTA) using micro pressing method. The proposed process was using pressing PZT green sheet by PMMA micro mold obtained from X-ray lithography. Microstructures, electriacl and electro-mechanical properties of fabricated composites were analyzed. Dielectric constant at 1kHz and thickness mode electro-mechanical coupling coefficient of $6.2mm{\times}6.2mm{\times}422{\mu}m$ UTA sample were 1754 and 51%, respectively. Microstructures of sintered PZT showed dense and uniform. And PZT phases were well crystallized. Micro pressing method is a mass productive process in case of using injection molded PMMA by batch type LIGA process.

• 한국소음진동공학회논문집
• /
• 제17권6호
• /
• pp.498-506
• /
• 2007

Using wind tunnel, experimental approaches were employed to investigate fluidelastic instability of tube bundles, subjected to uniform cross flow. There are several flow-induced vibration excitation mechanisms, such as fluidelastic instability, periodic wake shedding resonance, turbulence-induced excitation and acoustic resonance, which could cause excessive vibration in shell-and tube heat exchanges. Fluidelastic is the most important vibration excitation mechanism for heat exchanger tube bundles subjected to cross flow. The system comprised of cantilevered flexible cylinder(s) and rigid cylinders of normal square array, In order to see the characteristics of flow in tube bundles, particle image velocimetry was used. From a practical design point of view, Fluidelastic instability may be expressed simply in terms of dimensionless flow velocity and dimensionless mass-damping. The threshold flow velocity for dynamic instability of cylinder rows is evaluated and the data for design guideline is proposed for the tube bundles of normal square array.

• 한국전자통신학회논문지
• /
• 제8권12호
• /
• pp.1875-1882
• /
• 2013

마이크로 어레이 기술은 유전자 네트워크의 순서 와 게놈의 통합과 같은 많은 업적을 기여하고 있으며, 이러한 기술은 유전자 발현의 패턴을 조사하기 위한 수단 등으로 잘 확립 되어있다. DNA 마이크로배열은 Affymetric 칩을 이용하여 대량의 DNA 서열을 합성 할 수 있는데 기존의 DNA 어레이 스포팅에는 일반적으로 접촉방식과 압전전자 방법등 두가지 유형이 있다. 접촉방법은 유리 슬라이드 표면과 접촉하도록 스포팅핀을 사용하는데 이 방법은 표면 매트릭스의 손상이나 상처가 발생할 수 있어 단백질이 오염 되거나 특정 결합을 방해할 위험이 있다. 반면에 압전전자 방법은 대량 생산이 가능함에도 불구하고 결과를 인쇄할 분석기가 필요하므로 현재 실험실 내에서만 수행 가능한 실정이다. 본 논문에서 유리 슬라이드 표면에 닿지 않고 지속적으로 일관성 있게 스포팅이 가능하도록 하는 진보된 방법을 제시한다.

• 대한수의학회지
• /
• 제24권2호
• /
• pp.149-162
• /
• 1984

The research was conducted(1) to confirm the agent(s) responsible for the antimicrobial activity contained in the fermented tomato juice with L. acidophilus(2) to extract and purify the antimicrobial agent(s)(3) to find the biological, physical and chemical properties of the agent(s). The following results were obtained and summarized as followings; 1. The agent responsible for the inhibitory activity was confirmed by both well assay method using fermented tomato juice with L. acidophilus and turbidimetric technique using the cell-free filtrate or neutralized filtrate of tomato acidohilus culture and found exerted antimicrobial agent other than lactic acid. 2. The procedures of purification : The isolation and purification of antimicrobial agent from the lyophilized acidophilus tomato culture were carried out by (1) methanol extraction (2) acetone extraction, (3) Sephadex G-50 gel filtration (4) paper chromatography and (5) thin layer chromatography. 3. The biological, physical and chemical properties of antimicrobial agent: The biological, physical, chemical properties of the purified antimicrobial agent were: (1) The antimicrobial activity was strong against test organisms; Bacillus subtilis(ATCC 6633), Escheichia coli(ATCC 25922), Staphylococcus aureus(ATCC 167), Pseudomonas fluorescens(KFCC 32394), Proteus vulgaris and Shigella dysenteriae. (2) The pH value of the agent was 2.0 and the inhibitory activity was lost when it was neutralized at 7.0 of pH and the agent was heat stable at $121^{\circ}C$ for 60 minutes. (3) The ultraviolet light absorption spectra of methanol-acetone extract and TLC fraction exhibited a maximum absorption at 260nm and 224nm respectively. (4) The most purified agent from TLC plate increased about 130-fold in activity. (5) The agent isolated from TLC plate was free from $H_2O_2$ or lactic acid. 4. Bioautographic assy: By means of bioautography of the agent on silica gel of TLC plate a strong inhibitory activity against B. subtilis was demonstrated. 5. Mass spectrometry: The agent obtained from TLC plate was analyzed by mass spectrometry which show the parent peak at m/e 264 suggesting the molecular weight of the compound and molecular group such as [$C_2H{^+}_4$], [CO], [CH=NH], [$C_3{H^}4_7$], [$\begin{array}{rcl}O\\{\parallel}\\CH_3-C\\\end{array}$], [$C_6-H{^+}_{11}$], [$C_5H{^+}_{11}$], [$\begin{array}{rcl}O\\{\parallel}\\C_5H_7-C^+\\\end{array}$] were suggested.

• 한국생명과학회:학술대회논문집
• /
• 한국생명과학회 2008년도 제49회 학술심포지움 및 국제학술대회
• /
• pp.78.2-78.2
• /
• 2008

• Journal of Mechanical Science and Technology
• /
• 제14권9호
• /
• pp.997-1004
• /
• 2000

The experiments were conducted by using water and paraffin slurry to investigate the effect of a chip spacing in the multichip module on the cooling characteristics from an in-line $4{\times}3$ array of discrete heat sources which were flush mounted on the top wall of a channel. The experimental parameters were chip spacing in a multichip module, heat flux of simulated VLSI chip, mass fraction of paraffin slurry, and channel Reynolds number. The removable heat flux at the same chip surface temperature decreased as the chip spacing decreased at the first and fourth rows. The local heat transfer coefficients for the paraffin slurry were larger than those for water, and the chip spacing on the local heat transfer coefficients for paraffin slurry influenced less than that for water. The enhancement factor for paraffin slurry showed the largest value at a mass fraction of 5% regardless of the chip spacing, and the enhancement factors increased as the chip spacing decreased. This means that the paraffin slurry is more effective than water for cooling of the highly integrated multichip module.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.123-126
• /
• 2001

Multiwalled carbon nanotubes were massively produced by the catalytic reaction of C$_2$H$_2$ - Fe(CO)$\sub$5/ mixture at 750 - 950$^{\circ}C$ in a quartz tube reactor and over quartz substrates. Well-aligned MWNT array grows perpendicular to the quartz tube reactor and the quartz substrates at an average of 60 nm in diameter and up to several thousands of micrometers in length. This method does not require any pretreatment of substrates and CNTs are grown at atmospheric pressure. It could be suitable for mass production of multiwalled nanotubes. Scanning electron microscope and transmission electron microscope images of the nanotubes deposited on the substrates allowed us to monitor the quality of MWNTs grown under different operating conditions.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.13-18
• /
• 2015

Micro planar type liquid propellant thruster was fabricated by MEMS manufacturing process for micro/nano satellites applications. 90 wt.% hydrogen peroxide was used as propellant and for propellant decomposition, Pt/Al2O3 was used as catalyst. Micro thruster structure was made by 5 photosensitive glasses patterned with thruster component profiles. Objective thrust was 50 mN and required hydrogen peroxide mass flow was 2.1 ml/min, which was supplied by syringe pump and teflon tube in experimental test. Performance test said that average steady thrust was approximately 30 mN, around 60% of objective thrust, and transient time was about 5 sec. It is estimated that extended response time was due to high thermal energy loss of micro scale thruster and low enthalpy input by propellant mass flow.

• 한국식품과학회지
• /
• 제32권6호
• /
• pp.1437-1441
• /
• 2000

Acycloretinal을 Tollens 시약으로 처리하여 acycloretinoic acid를 얻었다. 생성된 표준품 acycloretinoic acid는 Silica-HPLC 및 ODS-HPLC를 통하여 정제를 행하고 GC-MS에 의해 동정하였다. Lycopene을 toluene과 Tween 40 수용액에서 $37^{\circ}C$ 조건으로 자동산화시킨 결과, acidic 화합물이 생성되었다. Lycopene의 자동산화로부터 생성된 acidic 화합물은 그 HPLC상의 거동, 분광학적 특성 및 mass spectra의 특성이 acycloretinoic acid 표준품과 잘 일치하였다. 이러한 결과로 in vitro상의 산화적 조건하에서 lycopene의 자동산화에 의해 acycloretinoic acid가 생성됨을 알 수 있었다.