• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.686-693
• /
• 2000

Biomass yield, nutritive value and nutrient utilization efficiency of different genera of duckweed (DW, Lemnaceae) under the same nutritional and management conditions were studied. Three genera of DW namely: Lemna perpusilla, Spirodela polyrhiza and Woljfia arrhiza, were cultivated in 18 plastic sinks each of $59{\times}54{\times}35cm^3$ size. Each sink contained approximately 80 L of water and was charged once with 6.648 kg of anaerobically fermented cow dung effluent. The seed rate for Spirodela, Lemna and Wolffia were 600, 400 and $600g/m^2$ respectively. Duckweed were harvested at 48 hours intervals. Media total N concentration for Lemna and Wolffia gradually increased with time. Growth of duckweed was measured by subtracting the inoculum from the total biomass production. Growth of Spirodela ceased within 4 days but Lemna and Wolffia continue to grow up to 34 days. Bio-mass yield was significantly (p<0.05) higher in Wolffia (906 kg/ha/d) than Lemna (631 kg/ha/d). Dry matter (DM) yield was very similar in Lemna (14.80 kg/ha/d) and Wolffia (14.57 kg/ha/d). The N content was non-significant higher in Lemna (5.45%) than Wolffia (5.00%) and Spirodela (4.6%). The crude protein (CP, $N{\times}6.25$) yield was non-significantly higher in Lemna (4.83 kg/ha/d) than Wolffia (4.32 kg/ha/d). The acid detergent fibre (ADF) content was the highest in Wolffia (28.59%), followed by Spirodela (19.47%) and Lemna (12.39%). Utilization efficiency of CP was 273 and 314% respectively for Wolffia and Lemna. However, similar efficiency values for Spirodela was only 1.5%. Considering the bio-mass yield, nutritive value and nutrient utilization efficiency, production performance of DW were in the order of Lemna>Wolffia>Spirodela under the present experimental conditions.

• 생물환경조절학회지
• /
• 제14권4호
• /
• pp.298-301
• /
• 2005

Potato (Solamum tuberosum 'Dejima') plantlets were investigated on culture type and initial quantity of inoculation in bioreactor and survival rate by hydroponics for mass production. rode stems (1 to 1.5cm in length) of potato plantlets multiplied in vitro were grown for 3 weeks in liquid Murashige and Skoog (MS) medium with sucrose $30 g\; L^{-1}$. When plantlets (80-node inoculation) were raised in 10L balloon type bubble (BB) bioreactor, the healthiest growth of plantlets was obtained from explants cultured in ebb & flow culture with medium supplied periodically 12 times per day. The suitable inoculation quantity of 20L BB bioreactor was 120 pieces of stem segments (mean 2.2g fresh weight) in ebb & flow culture. Number of nodal shoot was eight on the average. In controlled culture room, survival rate of plantlets at 7 days after stem cutting was above $70\%$ when they were acclimatized by hydroponics grown in deep flow and solid medium culture. The highest survival rate of the stem cutting plantlets was in nutrient solution adjusted to EC $1.4dS{\cdot}m^{-1}$. Stem cutting plantlets through one culture could be obtained $670\~900$, when plantlets were grown in ebb & flow culture during 3 weeks using a 20L bioreactor with initial 120 pieces of nodal segments. 11 is possible In do mass production of seedlings cultured in bioreactor and hydroponics.

• 한국식품영양과학회지
• /
• 제36권10호
• /
• pp.1341-1350
• /
• 2007

본 연구에서는 국내산 감귤과즙을 이용하여 고기능성 세균 셀룰로오스를 대량생산하기 위해 감귤과즙으로부터 감귤 내성의 Gluconacetobacter hansenii TL-2C를 선별한 후 pilot 시설을 이용하여 감귤겔을 대량 생산할 수 있는 방법을 개발하였다. 유기산의 약 80%가 citric acid로 내성균의 분리가 부득이한 것으로 판정되어, 겔 발효균의 모체인 tea fungus에서 G. hanenii TF-2를 분리, 여기에 UV를 조사하여 TL-2를 분리한 후, 감귤배지에서 반복배양하여 citrate내성균인 G. hansenii TL-2C를 분리하였다. 감귤농축액 100배 희석액에 initial sucrose 함량 10%(w/v), ethanol 1%(v/v) 을 첨가한 배양액에 종균을 5%(w/v)접종하였다. 대형 4각의 FRP 용기에 뚜껑을 덮고 과즙의 높이를 26 mm로 충진하였으며, $30^{\circ}C$ 배양실에서 14일간 정치배양한 후 세로 360 mm,가로 650 mm, 두께 25 mm 이상의 대형 겔을 지속적으로 생산할 수 있었다.

• 한국수산과학회지
• /
• 제38권1호
• /
• pp.12-19
• /
• 2005

This study investigated the productivity and growth of copepods, Sinocalanus tenellus 2 strains, Paracyclopina nana 3 strains, Apocyclops royi 2 strains, Tachidius triangularis 1 strain and Tigriopus sp. 1 strain at different temperatures $(24,\;28\;and\;32^{\circ}C)$ under 15 psu and various salinities (10, 20, 30 psu) at $28^{\circ}C$ for an individual culture. And the mass culture was carried out to evaluate the production of these copepods in the 500 mL vessel. For an individual culture of copepod, survival period of a brood female tended to increase with the decrease of temperature, but was not significantly influenced by salinity. With an increase of temperature and a decrease of salinity, maturation period of nauplii in all species tended to decrease. Total nauglii production from a broodo female at $24^{\circ}C$ was higoher than that from a brood .female at either 28 or $32^{\circ}C$ for S. tenellus and at $32^{\circ}C$ than either 24 or $32^{\circ}C$ for A. royi Haenam stram, but was not influenced by temperature for another copepods. And total nauplii production from a brood female at 10 and 20 psu tended to be higher than that from a brood female at 30 psu, expect for Tigriopus sp. and P. nana Hwajinpo strain. Total nauplii production from a brood female was the highest in Tigriopus sp. (350 nauplii) at $28^{\circ}C$ under 20 psu, followed by A. royi Haenam strain (187 nauplii) at $32^{\circ}C$ under 15 psu and P. nana Hwajinpo strain (152 nauplii) at $24^{\circ}C$ under 10 psu. In the mass culture of each copepod, P. nana was the most productive (26.6 mg dry weight) and this value was two and four times higher than productivity of Tigriopus sp. and A. royi, respectively.

• 한국시뮬레이션학회논문지
• /
• 제21권1호
• /
• pp.69-79
• /
• 2012

대량 맞춤화 생산에서 목표 중 하나는 생산 비용이나 제품 인도 스케줄을 크게 변화시키지 않고 특정 고객의 요구를 만족시키는 생산을 달성하는 것이다. 조선 항공과 같은 대형 조립-생산 산업에서의 맞춤화는 이에 따른 부품이나 또는 부품의 중간조립품인 모듈의 변화를 가져오게 된다. 본 연구는 조선 분야에서의 사례 연구를 통하여 고객의 맞춤화에 따른 생산 스케줄의 변화가 선박 인도에 미치는 영향을 분석하고자 한다. 대단위 조립 생산에서 대량 맞춤화는 맞춤화의 요구 수준에 따라 엔지니어링 및 조립-생산 시간이 변화한다. 본 연구는 조선 산업에서 처음으로 대량 맞춤화를 수행하는 생산 방안을 제안하고 이론적조선 생산 과정을 간략히 기술한 시뮬레이션 모형을 통하여 다양한 수준에서의 대량 맞춤화가 선박 인도 일정에 어떠한 영향을 미치는가를 평가하였다.

• Animal cells and systems
• /
• 제3권1호
• /
• pp.29-39
• /
• 1999

Current data on reproductive characters of endemic and native species are essential to provide a strategy for the conservation of these species. Red pine (Pinus densiflora Sieb. & Zucc.) is one of the dominant, native tree species in Korea, but its reproductive ecology is not well-known. In 1997, the pattern of variation in cone and seed yields contributing to the conservation of declining populations of red pines was examined. Plant height and dbh were measured, and several new cones were collected from each tagged tree after counting the number of cones on each tree. For a subset of cones sampled, the number of fertile scales, the number of seeds at three development stages (early/late aborted, and filled seed), seed wing size, wing color, and individual filled seed mass were measured. The three sites which differed significantly in mean plant size also differed in mean cone and seed production per plant. However further analyses showed that most variation in characters examined occurred among plants within sites, but not among sites. An average of 90% of the potential seeds on the cones aborted at an early developmental stage, demonstrating that early abortion is a major factor affecting the number of filled seeds per cone. Individual seed mass was the only character which exhibited significant variations among sites as well as among trees within sites. Individual seed mass was overall negatively correlated with both the percentage of late abortion and the number of old cones per plant, suggesting that both the past and current years' reproductive activities have caused variations in seed mass. The potential dispersal distance of red pine seeds is quite large. However, wing loading was correlated with seed mass and number in a complex pattern across the sites. Distribution of seeds with varied colored wings differed among sites and among trees within sites. These results suggest that red pines at different sites might possess different strategies to cope with selection pressures acting during the final phase of reproduction, from seed dispersal to establishment. Then the ‘fitted’ red pine trees at each site should be identified and managed to conserve or restore populations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.

• 기술사
• /
• 제10권3호
• /
• pp.17-26
• /
• 1977

In order to obtain the most practical and economically efficient method for refining of kenaf fiber and the production possibility of bag dproucts by using kenaf, Various chemicals and conditions of treatment for refining of kenaf bark were examined. Refining by the retting method was found much beneficial in quality of fiber and in processing cost than the chemical mettled. Bag products by using kenaf bark has good quality , and for practical use, Even if the production cost is slightly more expensive than jute bag, it could be reduced by planned mass production.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.36-36
• /
• 2004

현재의 제조업들은 극도로 심화된 기업 간의 경쟁과 고객 요구사항의 급변으로 인해 신속한 제품 개발 및 효율적 제조를 요구받고 있다. 생산시스템은 대량생산방식(mass Production)에서 적시/적량 생산방식(lean production)으로 발전해왔고, 최소의 리드타임(lead time)을 갖는 민첩한 생산시스템으로의 발전이 요구되고 있으며, 근래에 새롭게 대두되고 있는 생산 패러다임인 e-Manufacturing에서는 확장된 기업체계 하에서 협업적 제품 개발과 신속 제조(collaborative product development and rapid production)의 달성을 지향하고 있다.(중략)

• 대한안전경영과학회지
• /
• 제2권2호
• /
• pp.139-153
• /
• 2000

To develope a domestic machinery industry, international competition through reducing cost by increasing productivity is as important as evolving technology and increasing quality. In this study, we have studied in application of GT technology. GT is a skill that acquires high productivity using part's resemblance for multi part and small size production like mass production. We have classified group, such as design, layout and the others, to be applied systematically. The design group includes retrieval for drawings and study for GT design. The layout group includes GT layout, analysis of production process and study for composition method. And others include scheduling, standardization and standard process.