• Journal of Astronomy and Space Sciences
• /
• v.37 no.1
• /
• pp.1-9
• /
• 2020

Frozen orbit is an attractive option for orbital design owing to its characteristics (its argument of pericenter and eccentricity are kept constant on an average). Solar sails are attractive solutions for massive and expensive missions. However, the solar radiation pressure effect represents an additional force on the solar sail that may greatly affect its orbital behavior in the long run. Thus, this force must be included as a perturbation force in the dynamical model for more accuracy. This study shows the calculations of initial conditions for a lunar solar sail frozen orbit. The disturbing function of the problem was developed to include the lunar gravitational field that is characterized by uneven mass distribution, third body perturbation, and the effect of solar radiation. An averaging technique was used to reduce the dynamical problem to a long period system. Lagrange planetary equations were utilized to formulate the rate of change of the argument of pericenter and eccentricity. Using the reduced system, frozen orbits for the Moon sail orbiter were constructed. The resulting frozen orbits are shown by two 3Dsurface (semi-major, eccentricity, inclination) figures. To simplify the analysis, we showed inclination-eccentricity contours for different values of semi-major axis, argument of pericenter, and values of sail lightness number.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.7-14
• /
• 2000

Nowadays, the viscous damper using high viscosity oil was much to be used for engine shafting system to reduce the excessive additional stress by torsional vibration. In general, it was assumed that the viscous damper could be modelled having only damping coefficient, that is to say, whose stiffness be ignored. But it is found that there exists a jump phenomenon, as a kind of non-linear vibration, in the actual engine shafting system with a damper of high viscosity. Therefore the damper ring and the casing are modelled as two mass elastic system with a complex viscosity. Also, to analyze a non-linear phenomenon, it is assumed that the viscous damper has a linear stiffness coefficient in proportion to the angular amplitude and a non-linear stiffness coefficient in proportion to cube of the angular amplitude. For the analysis, Quasi-Newton method with BFGS(Broyden-Fletcher-Goldfarb-Shanno) formula is used. Both calculated and measured values are provided in this paper which confirm the possibility of applying non-linear theory to engine shafting system with viscous damper.

• Korean Journal of Remote Sensing
• /
• v.21 no.1
• /
• pp.51-57
• /
• 2005

The currently operating NASA/GFZ Gravity Recovery and Climate Experiment (GRACE) mission is designed to measure small mass changes over a large spatial scale, including the mapping of continental water storage changes and other geophysical signals in the form of monthly temporal gravity field. The European Space Agency's Gravity field and steady state Ocean Circulation Explorer (GOCE) space gravity gradiometer (SGG) mission is anticipated to determine the mean Earth gravity field with an unprecedented geoid accuracy of several cm (rms) with wavelength of 130km or longer. In this paper, we present a summary of present GRACE studies for the recovery of hydrological signals in the Amazon basin using alternative processing and filtering techniques, and local inversion to enhance the temporal and spatial resolutions by two-folds or better. Simulation studies for the potential GRACE detection of slow deformations due to Nazca-South America plate convergence and glacial isostatic adjustment (GIA) signals show that these signals are at present difficult to detect without long-term data averaging and further improvement of GRACE measurement accuracy.

• Journal of Environmental Impact Assessment
• /
• v.14 no.4
• /
• pp.227-235
• /
• 2005

Source contribution for VOCs collected in Seoul metropolitan area was conducted using PAMs (Photochemical assessment monitoring system) data and CMB(Chemical Mass Balance) model8.0, in order to estimate spatial and temporal variations of VOCs source contribution in that area, and also to compare with corresponding emission inventory. VOCs data used in model calculation were collected at 6 different sites of PAMs(Seokmori, Guwoldong, Simgokdong, Bulgwangdong, Jeongdong and Yangpyeong) and 22 out of 56 VOCs species were analyzed from June 2002 to march 2003 and used for CMB model estimation. The result showed that vehicle exhaust, coating and energy combustion were important sources of VOCs in Seoul metropolitan area, averaging 32.6%, 25.5% and 25.1%, respectively. In this study as well as other references, it was revealed that vehicle exhaust is the main contributor of urban area VOCs, but there is remarkable contrast between emission inventory and model estimation. Vehicle exhaust portion is seriously underestimated while coating is usually overestimated in emission estimates, compared to CMB results. Therefore, it is considered to assert and confirm the uncertainty of emission estimates and clarify the distinction between two other source apportionment methods.

• Advances in Energy Research
• /
• v.5 no.2
• /
• pp.91-105
• /
• 2017

Thermal hydraulic (TH) analysis of nuclear power reactors is utmost important. In this way, the numerical codes that preparing TH data in reactor core are essential. In this paper, a subchannel analysis of a Russian pressurized water reactor (WWER1000) core with enhanced numerical code is carried out. For this, in fluid domain, the mass, axial and lateral momentum and energy conservation equations for desired control volume are solved, numerically. In the solid domain, the cylindrical heat transfer equation for calculation of radial temperature profile in fuel, gap and clad with finite difference and finite element solvers are considered. The dependence of material properties to fuel burnup with Calza-Bini fuel-gap model is implemented. This model is coupled with Isotope Generation and Depletion Code (ORIGEN2.1). The possibility of central hole consideration in fuel pellet is another advantage of this work. In addition, subchannel to subchannel and subchannel to rod connection data in hexagonal fuel assembly geometry could be prepared, automatically. For a demonstration of code capability, the steady state TH analysis of a the WWER1000 core is compromised with Thermal-hydraulic analysis code (COBRA-EN). By thermal hydraulic parameters averaging Fuel Assembly-to-Fuel Assembly method, the one sixth (symmetry) of the Boushehr Nuclear Power Plant (BNPP) core with regular subchannels are modeled. Comparison between the results of the work and COBRA-EN demonstrates some advantages of the presented code. Using the code the thermal modeling of the fuel rods with considering the fission gas generation would be possible. In addition, this code is compatible with neutronic codes for coupling. This method is faster and more accurate for symmetrical simulation of the core with acceptable results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.3
• /
• pp.290-301
• /
• 2006

A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank. Efficiency of push pull hood system is affected by various parameters, such as, cross draft, vessel shapes, tank surface area, liquid temperature. A previous work assisted by flow visualization technique qualitatively showed that a strong cross draft blown from the pull hood to push slot could destroy a stable wall-jet on the surface of tank, resulting in the abrupt escape of smoke from the surface. In this study, the tracer gas method was applied to determine the effect of cross-draft on the capture efficiency qualitatively. A new concept of capture efficiency was introduced, that is, linear efficiency. This can be determined by measuring the mass of tracer gas in the duct of pull hood while the linear tracer source is in between push slot and pull hood. By traversing the linear tracer source from the push slot to the pull hood, it can be found where the contaminant is escaped from the tank. Total capture efficiency can be determined by averaging the linear efficiencies. Under the condition of cross-draft velocities of 0, 0.4, 0.75, 1.05 and 1.47m/s, total capture efficiencies were measured as 97.6, 95.4, 94.6, 92.7 and 70.5% respectively. The abrupt reduction of efficiency with cross-draft velocity of 1.47m/s was due to the destruction of tank surface wall-jet by the counter-current cross-draft. The same phenomenon was observed in the previous flow visualization study. As an alternative to overcome this abrupt efficiency drop, the 20% increase of hood flow rates was tested, resulting in 20% efficiency increase.

• Journal of Environmental Science International
• /
• v.33 no.7
• /
• pp.477-487
• /
• 2024

This study aimed to identify the growth environment of Cudrania tricuspidata by analyzing the site environment, soil characteristics, and vegetation structure of the species habitats and to provide basic data for identifying suitable cultivation sites for mass production. The study was conducted on 17 sites in five cities/counties of Gyeongnam and Jeonnam province. It was found that C. tricuspidata habitats were mainly distributed on gentle slopes in the southeast and southwest, with an average altitude of approximately 290 m. The soil of the C. tricuspidata habitats was sandy loam with a high proportion of sand, averaging 73.9%, 4.6%, and 21.5% sand, silt, and clay, respectively. The soil had a pH value of 5.41 (5.20-5.79), organic matter content of 8.2% (3.6-12.6%), total nitrogen content of 0.36% (0.19-0.54%), available phosphorus content of 3.50 ppm (0.95-7.61 ppm), and cation exchange capacity of 15.9 cmol⁺/kg (10.0-20.7 cmol⁺/kg) on average. The vegetation structure analysis showed that C. tricuspidata appeared in the tree layers of regions A (Jinju) and E (Yeosu), but the importance of C. tricuspidata was found to be high in the subtree and shrub layers in all regions. The ecological niche breadth was widest (0.874) in region B (Hadong) and narrowest (0.480) in region E (Yeosu).

• Journal of Aquaculture
• /
• v.14 no.3
• /
• pp.197-203
• /
• 2001

To replace fish meal (FM) in the diet of Nile tilapia, Oreochromis nloticus, different levels of Iysine cell mass (LCM) were added to diet on protein equivalent base. fish averaging 3.0 g fed one of nine diets containing isonitrogenous and isocaloric basis of 35% crude protein and 15.3kJ available energy/g diet: $LCM_0, 100% FM: LCM_{10}, 90% FM+10% LCM, LCM_{20}, 80% FM+20% LCM; LCM_{30}, 70% FM+30% LCM; LCM_{40}, 60% FM+40% LCM; LCM_{30}l, 70% FM+30% LCM+lysine; LCM_{30}ln, 70% FM +30% LCM + lysine +NaOH; LCM_{40}lan, 60% FM+40% LCM+lysine+arginine; LCM_{40}/lan, 60% FM+40% LCM+lysine+arginine+NaOH.$. After 8 weeks of feeding trial, there were no significant differences in weight gain (WG) and specific growth rate (SGR) among fish fed LCM$_{0}$ (control diet), LCM_{10}, LCM_{30}, LCM_{40}, LCM_{30}l, LCM_{30}ln, LCA_{40}la and LCM_{40}lan diets (P>0.05)$, while fishes fed $LCM_{20} diet were significantly higher than those fed LCM_{0}, LCM_{30}, LCM_{40}, LCM_{40}la and LCM_{40$}lan diets (P<0.05). There were no significant differences in feed efficiency (FE) and protein efficiency ratio (PER) among fish fed control diet, $LCM_{10}, LCM_{20}, LCM_{30}ln, LCM_{ 40}la and LCM_{40}$lan diets (P>0.05), while fishes fed control diet were significantly higher than those fed $LCM_{30}, LCM_{40} and LCM_{40}l diets (P<0.05)$. Positive effects were not shown in WG and SGR with supplementation of amino acids (lysine & arginine) and neutralizatio, while FE and PER from fish fed $LCM_{40}la and LCM_{40}lan diets were significantly higher than those fed LCM_{30}, LCM_{40} and LCM_{30}$l diets (P<0.05). Hence, LCM can replace FM up to 40%, and dietary suppl-ementacon and neutralization of amino acids showed positive effects, when FE and PER were considered in juvenile tilapia diet.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.336-341
• /
• 2002

This experiment was conducted to evaluate the lysine cell mass (LCM) as a dietary fish meal (EM) protein replacer in juvenile Israeli carp, Cyprinus carpio. Fishmeal, a major animal protein source in the control diet, was replaced by tCM on the protein equivalent base, Fish averaging 1,7 $\pm$ 0.1 g (Mean $\pm$ SD) fed one of nine diets containing isonitrogenous and isocaloric basis of $38\%$ crude protein and 15.2 kJ available energy/g diet: control, $100\%$ $FM; LCM_20$, $80\%$ $FM+20\%$ $LCM; LCM_40$, $60\%$ $FM+40\%$ $LCM; LCM_60$, $40\%$ $FM+60\%$ $LCM; LCM_100$, $100\%$ $LCM; LCM_20$l, $80\%$ $FM+20\%$ $LCM+0.07\%$ $Lysine; LCM_40$l, $60\%$ $FM+40\%$ $LCM+0.14\%$ $Lysine; LCM_60$l $40\%$ $FM+60\%$ $LCM+0.22\%$ Lysine; LCM_100l, $100\%$ LCM+$0.35\% Lysine. After 6 weeks of feeding trial there was no significant difference in weight gain (WG), feed efficiency (FE), protein efficiency ratio (PER) and specific growth rate (SGR) among fish fed control and $LCM_20$ (P>0.05), while fish fed $LCM_40,\;LCM_60,\;LCM_100,\;LCM_40l,\;LCM_60l\;and\;LCM_100l$ diets had a significantly lower WG, FE, PER and SGR than did fish fed control diet (P<0.05). There was no significant difference in WG, PER and SGR among fish fed control and $LCM_20$l diets (P>0.05), while fish fed $LCM_20$l S had a significantly lower FE than did fish fed control diet (P<0.05). No significant difference was observed in hematocrit and condition facto, among fish fed nine diets (P>0.05). Therefore, these results indicated that LCM could replace FM up to $20\%$ and dietary synthetic lysine supplementation did not show any positive growth effects in juvenile Israeli carp.

• Journal of Aquaculture
• /
• v.8 no.3
• /
• pp.195-207
• /
• 1995

In order to study the embryonic development and hatching of wild long shanny, Stichaeus grigorjewi, were caught with the gill nets in the East Sea of Korea, and stocked at indoor tanks to induce natural spawning in February 25, 1994 and February 16 to 24, 1995. They were already matured when stocked, and average body length (50.66 cm) and body weight (1,192.74 g) of 57 females and average body length (48.62 cm) and body weight (612.58g) of 43 males were recorded. Before stocking, they were inserted with identification tags(ID tags) in the dorsal muscle, and spawning was traced by the portable reader (Destron/lDl Ltd.) Forty females among 57 spawned successfully in the average of 4 days after stocking. Females spawned almost all eggs contained in the ovaries at one time in the form of an egg mass and averaging 227,200 eggs Per egg mass. The egg mass was oval in shape, translucent milky in color, 20.32cm long axis and 14.57cm short axis in size, and 803.7g in weight. Male parents guarded their egg masses and circulated water with the tail part of the body. Fertilized egg was spherical in shape, and their average diameter was 1.54 mm. Each egg had a containing single oil globule, and it's average diameter was 0.37 mm. The average water temperature was $13.2^{\circ}C$ and incubation times after fertilization were 5 hours 25 minutes up to 2-cell stage, 13 hours up to morula stage, and 66 hours 35 minutes up to embryo formation stage. Hatching rate was approximately 10 percent in 368 hours 50 minutes after fertilization, and approxionateoly 90 percent of eggs were hatched in 425 hours 30 minutes after fertilization.