• 한국환경보건학회지
• /
• 제37권3호
• /
• pp.209-217
• /
• 2011

Objectives: In this study, the size distribution of airborne particulates ($PM_{10}$) was measured by using Cascade Impactors. The purpose of this study was to assess the size distribution of metal and ionic materials of $PM_{10}$. Methods: Samples were collected in the Kunsan industrial complex from April 2006 to January 2007. Results: The mass fraction of $PM_{10}$ had a bimodal distribution between 2.1-3.1 ${\mu}M$, and the average mass fraction of particles less than 2.1-3.1 ${\mu}M$ was 47%. Average concentrations of PM10 were 68.05 ${\mu}g/m^3$ and seasonal concentration 95.44 ${\mu}g/m^3$ for spring, 49.03 ${\mu}g/m^3$ for summer, 81.99 ${\mu}g/m^3$ for fall, 52.66 ${\mu}g/m^3$ for winter, respectively. Conclusions: Seasonal variations of $PM_{10}$ were significant for showing peak values in spring. The average concentrations of Cd, Cr, Pb, and Fe were 1.54, 4.51, 14.11, and 254.3 $ng/m^3$, respectively. The ratios of fine particles to total mass were 0.47 for $PM_{10}$, 0.45 for Cr, and 0.16 for Fe, 0.91 for Cd and 0.49 for Pb, respectively.

• 열처리공학회지
• /
• 제35권1호
• /
• pp.20-26
• /
• 2022

This paper was designed to prevent intervertebral disc escape and treatment. we produced downsized lumbar traction bed at home and automated system depending on weight and muscle mass by using 3D print and Arduino to confirm the possibility of prototyping. Hence, we checked muscle mass 10 males in their 20s with different exercise conditions, and it shows that average muscle mass of group who exercised was 56.63kg, and non-exercise group was 50.8 kg. this is shows lumbar repetitive exercise can show the traction therapy effect can be seen traction therapy effect. In addition, we installed wooden doll substitute people with spring and test changing of length. Traction bed has the steps ranging from 1 to 4, in which the motor with torque and rpm, ranging from 4.7 to 5.5 kgf and from 4.5 to 5.3 rpm, respectively. The motor controlled with the voltage of Arduino was operated for the length of the spine to be stretched to 4-5 mm. As increasing the weight of the wooden doll by 10g, it was confirmed that the spring increased by 4-5 mm from the first step to the fourth step.

• Smart Structures and Systems
• /
• 제30권2호
• /
• pp.173-181
• /
• 2022

The current paper presents a technique to detect crack in non-uniform cantilever-type pipe beams, that have step changes in the properties of their cross sections, restrained by a translational and rotational spring with a tip mass at the free end. An equation for estimating the natural frequencies for the non-uniform beams is derived using the boundary and continuity conditions, and an equivalent bending stiffness for cracked beam is applied to calculate the natural frequencies of the cracked beam. An experimental study for a step-changed non-uniform cantilever-type pipe beam restrained by bolts with a tip mass is carried out to verify the proposed method. The translational and rotational spring constants are updated using the neural network technique to the results of the experiment for intact case in order to establish a baseline model for the subsequent crack detection. Then, several numerical simulations for the specimen are carried out using the derived equation for estimating the natural frequencies of the cracked beam to construct a set of training patterns of a neural network. The crack locations and sizes are identified using the trained neural network for the 5 damage cases. It is found that the crack locations and sizes are reasonably well estimated from a practical point of view. And it is considered that the usefulness of the proposed method for structural health monitoring of the step-changed non-uniform cantilever-type pipe beam-like structures elastically restrained in the ground and have a tip mass at the free end could be verified.

• Smart Structures and Systems
• /
• 제33권6호
• /
• pp.415-430
• /
• 2024

To control vertical and lateral compound vibration simultaneously using an integrated smart controller, passive tuned mass damper (TMD) and tuned liquid damper (TLD) are updated and combined to an adaptive-passive TMD-TLD (AP-TMD-TLD) system. As for the vertical AP-TMD part on top of the vertical spring, it can retune itself through varying the level of liquid in the tank to adjust its mass, while the lateral AP-TLD part at the bottom of the vertical spring can retune itself by changing the level of liquid. Further, for multimodal response control, the multiple AP-TMD-TLD (MAP-TMD-TLD) system is proposed as well. Each AP-TMD-TLD in the system can identify the structural vertical and lateral modal frequencies through the wavelet-transform (WT) based algorithm and retune its vertical and lateral natural frequencies both through adjusting the level of liquid in the AP-TMD and AP-TLD parts respectively. A cantilever cable-stayed landscape bridge which is sensitive to both human-induced and wind-induced vibrations is presented as a case study. For comparison, initial parameters of MAP-TMD-TLD are mistuned. Results show that the presented system can retune its vertical and lateral frequencies precisely, while the retuned system has a better bi-directional compound control effect than the mistuned system before the retuning operation and can improve the serviceability significantly.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1287-1294
• /
• 2005

이 논문은 자유단이 스프링으로 지지되고 자유단 집중질량을 갖는 Beck 기둥의 안정성 해석에 관한 연구이다. Bernoulli-Euler보 이론을 이용하여 경사종동력을 받는 Beck 기둥의 자유진동을 지배하는 미분방정식과 경계조건을 유도하였다. 이 미분방정식을 수치해석하여 하중-고유진동수 곡선을 얻고 이로부터 발산임계하중 및 동요임계하중을 산출하였다. 수치해석의 결과로부터 경사변수, 집중질량 및 스프링 강성이 임계하중에 미치는 영향을 고찰하였다.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.749-755
• /
• 2007

Recently, novel MEMS probe cards can support reliable wafer level chip test with high density probing capacity. However, manufacturing cost and process complexity are crucial weak points for low cost mass production. To overcome these limitations, we have developed micro spring structured MEMS probe card. For fabrication of micro spring module, a wire bonder and electrolytic polished gold wires are used. In this case, stringent tension force control is essential to guarantee the low level contact resistance of micro spring for reliable probing performance. For this, relation between tension force of fabricated probe card and contact resistance is characterized. Compare to conventional probe cards, developed MEMS probe card requires fewer fabrication steps and it can be manufactured with lower cost than other MEMS probe cards. Also, due to the small contact scratch patterns, we expect that it can be applied to bumping types chip test which require higher probing density.

• 한국소음진동공학회논문집
• /
• 제20권4호
• /
• pp.405-413
• /
• 2010

The vibration characteristics of fully and partially embedded piles with flexibly supported end carrying an eccentric tip mass are investigated. The pile model is based on the Bernoulli-Euler theory and the soil is idealized as a Winkler model for mathematical simplicity. The governing differential equations for the free vibrations of such members are solved numerically using the corresponding boundary conditions. The lowest three natural frequencies and corresponding mode shapes are calculated over a wide range of non-dimensional system parameters: the rotational spring parameter, the relative stiffness, the embedded ratio, the mass ratio, the dimensionless mass moment of inertia, and the tip mass eccentricity.

• 해양환경안전학회지
• /
• 제23권2호
• /
• pp.194-199
• /
• 2017

오탁방지막이 바닷물 속에 설치되어 있을 때 조류와 파도가 변할 때 움직임과 앵커 파주력을 초과하는 유체력이 작용할 경우의 이동 메카니즘을 질량-스프링법으로 해석하였다. 설치 위치는 전남 진도군 임회면 굴포리 동령개 포구 해역이다. 앵커의 파주력을 초과하는 장력은 0.05 m/s에서는 318초 후에 도달하였고, 0.15 m/s에서는 77초, 0.25 m/s에서는 43초, 0.3 m/s에서는 37초 후에 앵커가 움직이기 시작하여, 조류 속도가 0.01 m/s로 증가함에 따라서 평균 11.2 초 정도, 앵커 이동시작 시간이 단축되고 있었다. 조류만 작용할 때와 파랑이 추가될 때의 차이점은 유속이 느릴 경우, 앵커의 이동이 시작되는 시간의 차이가 7.6 % 정도 발생하였으나, 유속이 빠른 경우는 4.3 % 미만으로 큰 차이가 없이 앵커 이동이 시작되는 것을 알 수 있었다. 조류 속도가 0.13 m/s를 초과하고 파도의 방향이 일치하면 주변의 해저 구조물과의 충돌로 인해 오탁방지막 성능이 정상적으로 작동하지 않을 수 있으니, 오탁방지막을 바다에 설치할 때 해수의 흐름 상황 등을 질량-스프링 방법으로 면밀하게 검토해야 한다.

• 대한한방소아과학회지
• /
• 제27권3호
• /
• pp.29-40
• /
• 2013

Objectives The purpose of this study is to evaluate the effect of hot spring bath in obese children. Methods The study was conducted with 20 obese children whose BMI were over 20 ($kg/m^2$). The hot spring bath program was performed in the hot-spring facilities with temperature of $32{\sim}36^{\circ}C$. The children bathed four times from June to July, 2012. Prior to their bath, their heights, weights, and body compositions were measured every time. They were also confirmed their obesity index and obesity degree during the program. Results After the bathing program, degree of obesity has changed, three obesity judgment index (BMI, RI and OI) of the children have decreased (BMI, RI, OI on the $1^{st}$ day: $25.99{\pm}3.47$, $177.63{\pm}17.43$, $37.74{\pm}13.42$; on the $4^{th}$ day: $25.06{\pm}3.08$, $168.4{\pm}14.8$, $30.60{\pm}12.12$), so have body fat mass and percent body fat (BFM, PBF on the $1^{st}$ day: $21.83{\pm}7.03$, $38.24{\pm}3.36$; on the $4^{th}$ day:$19.55{\pm}6.35$, $34.20{\pm}3.77$), but skeletal muscle mass has increased (SMM on the $1^{st}$ day: $18.37{\pm}4.24$ ; on the $4^{th}$ day: $19.80{\pm}4.44$). Conclusions This study shows that hot spring bath could be an effective way of managing and treating obesity.

• Ocean and Polar Research
• /
• 제44권3호
• /
• pp.191-207
• /
• 2022

Using the results of CTD casts made in Spring from 2017 to 2021, in this study we investigated the water mass distribution and occurrence of temperature inversion in the western seas of Jeju Island in spring. The distribution of water masses was characterized by cold and fresh water in the northwest and warm and saline water in the southeast, forming a strong thermohaline front running in the southwest-to-northeast direction. Strong temperature inversion mainly occurred in the frontal boundary when the cold water intrudes beneath the warm water at depths of 30-50 m. Analysis of the mixing ratio demonstrated that Jeju Warm Water is dominantly distributed in the western seas of Jeju Island, but its ratio can be modified depending on the southward extension of Yellow Sea Cold Water (YSCW). Results of in situ measurement showed that in 2020, the YSCW largely expanded to the western seas of Jeju Island, occupying approximately 40 % of the mixing ratio. Due to the expansion of YSCW, a strong thermohaline front was formed in the study area, thereby causing thick and strong temperature inversion. On the other hand, in 2018 the mixing ratio of YSCW was minimum (~18%) during the study period of 2017-2021, and thus a relatively weak frontal boundary was formed, without the occurrence of temperature inversion. The observational results also suggest that the interannual changes of water mass distribution and the associated temperature inversion in the western seas of Jeju Island are closely related with wind-driven Yellow Sea circulation in spring, which is the summer monsoon transition period.