• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.21-30
• /
• 2015

Ceramic foams are prepared as positive images corresponding to a plastic foam structure which exhibits high porosities (85-90%). This structure makes the ceramic foams attractive as a catalyst in a dry reforming process, because it could reduce a high pressure drop problem. This problem causes low mass and heat transfers in the process. Furthermore, the reactants would shortly contact to catalyst surface, thus low conversion could occur. Therefore, this research addressed the preparation of dry reforming catalysts using a sol-gel catalyst preparation via a polymeric sponge method. The specific objectives of this work are to investigate the effects of polymer foam structure (such as porosity, pore sizes, and cell characteristics) on a catalyst performance and to observe the influences of catalyst preparation parameters to yield a replica of the original structure of polymeric foam. To accomplish these objectives industrial waste foams, polyurethane (PU) and polyvinyl alcohol (PVA) foams, were used as a polymeric template. Results indicated that the porosity of the polyurethane and polyvinyl alcohol foams were about 99% and 97%. Their average cell sizes were approximate 200 and 50 micrometres, respectively. The cell characteristics of polymer foams exhibited the character of a high permeability material that can be able to dip with ceramic slurry, which was synthesized with various viscosities, during a catalyst preparation step. Next, morphology of ceramic foams was explored using scanning electron microscopy (SEM), and catalyst properties, such as; temperature profile of catalyst reduction, metal dispersion, and surface area, were also characterized by $H_2-TPR$ and $H_2-TPD$ techniques, and BET, respectively. From the results, it was found that metal-particle dispersion was relatively high about 5.89%, whereas the surface area of ceramic foam catalysts was $64.52m^2/g$. Finally, the catalytic behaviour toward hydrogen production through the dry reforming of methane using a fixed-bed reactor was evaluated under certain operating conditions. The approaches from this research provide a direction for further improvement of marketable environmental friendly catalyst production.

• Clean Technology
• /
• v.18 no.2
• /
• pp.191-199
• /
• 2012

In order to reduce or remove off-flavor and volatile organic compounds (VOCs) from Laminaria japonica effectively, continuous treatment process by supercritical carbon dioxide (SC-$CO_2$) was applied. After freeze-drying, Laminaria japonica powdered with $710{\mu}m$ was used. Experiments were carried out at temperature range from 35 to $55^{\circ}C$, and pressure range from 10 to 25 MPa for evaluation of SC-$CO_2$ treatment effect. Flow rate of carbon dioxide used in this reseach was constantly fixed at 26.81 g/min. Before and after treatment of SC-$CO_2$, off-flavor and VOCs from Laminaria japonica were analyzed by gas chromatography-mass spectrometry detector (GC-MSD). Total 47 VOCs emitted from Laminaria japonica were identified before treatment of SC-$CO_2$, major components of seaweed smell (ordor) in Laminaria japonica were identified as alcohols, aldehydes, ester and acids, ketone, halogenated compounds and hydrocarbon. Off-flavor and VOCs in all experimental conditions was reduced or removed after SC-$CO_2$ treatment. Among the experimental conditions, the highest removal yield was at 25 MPa and $55^{\circ}C$.

• Computational Structural Engineering
• /
• v.8 no.3
• /
• pp.103-111
• /
• 1995

Evaluating nonlinear response of a MDOF system under dynamic stochastic loads such as seismic excitation usually requires excessive computational efforts. To alleviate this computational difficulty, an approximation is developed in which the MDOF inelastic system is replaced by a simple nonlinear equivalent system(ENS).Me ENS retains the most important properties of the original system such as dynamic characteristics of the first two modes and the global yielding behavior of the MDOF system. The system response is described by the maximum global(building) and local(interstory) drifts. The equivalency is achieved by two response scaling factors, a global response scaling factor R/sub G/, and a local response scaling factor R/sub L/, applied to the responses of the ENS to match those of the original MDOF system. These response scaling factors are obtained as functions of ductility and mass participation factors of the first two modes of structures by extensive regression analyses based on results of responses of the MDOF system and the ENS to actual ground accelerations recorded in past earthquakes. To develop the ENS with two response scaling factors, Special Moment Resisting Steel Frames are considered. Then, these response scaling factors are applied to the response of ENS to obtain the nonlinear response of MDOF system.

• The Korean Journal of Mycology
• /
• v.14 no.1
• /
• pp.31-36
• /
• 1986

The volatile aroma concentrates were isolated from Pleurotus ostreatus by simultaneous distillation-extraction and analyzed by gas chromatography and combined gas chromatography-mass spectrometry. The aroma concentrates obtained had a typical raw or slightly cooked mushroom-like odor, and the yield was 123 ppm. Of 27 components identified, the major components were 3-octanone, 3-octanol, 2-octenal, n-octanol and 2, 4-decadienal, including 1-octen-3-ol contributing 67.06% of the total volatiles, and the $C_8$ compounds comprised about 80% of the total volatiles. On the other hand, the $C_6$ and $C_8$ alcohols in mushroom increased gradually with increase of standing time after homogenation, while aldehydes, ketones, and linoleic acid decreased, and also $C_6$ and $C_8$ compounds were significantly increased when linoleic and linolenic acid were added in homogenates. It appears that most of volatile aroma components in Pleurotus ostreatus were probably produced enzymatically from unsaturated fatty acids containing cis, cis-1, 4-pentadiene moiety.

• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.120-124
• /
• 2007

Fusarium proliferatum KGL0401 was previously isolated from Physalis alkekengi var. francheti plant roots and exhibited higher GA productivity than wild type Gibberella fujikuroi. The :tim of this work was to find out an optimal culture condition for GA production. Various carbon(fructose, glucose, lactose, maltose, sucrose) and nitrogen($KNO_3$, urea, glycine, $NaNO_3,\;NH_4Cl$) sources were used for this study. GAs activities were analysed by gas chromatography and mass spectrometry(GC-MS). The highest yield of $GA_3$ was found in the growth medium supplemented with sucrose as carbon source and $NH_4Cl$ as nitrogen source. The optimum carbon-nitrogen concentration for $GA_3$ production was found to be 0.5 M:0.17 M. Supernatant was prepared from the culture fluid of F. proliferatum KGL0401 cultured for 7 days at 3 0'E and the 10 ul supernatant was treated with 2 leaf-rice seedling.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.244-249
• /
• 1998

An extracellular polysaccharide, methylan, was produced under the specific conditions by Methylobacterium organophilum from methanol. The specific growth rate of cells was approximately constant regardless of C/N ratio and the specific product yield was maximum at a C/N ratio of 30. Methylan production was suppressed by the deficiency of mineral ions such as Mn$^{++}$ or Fe$^{++}$ ion. The optimal pH for cell growth and methylan production was 7. Whereas the optimal temperature for cell growth was found to be 37$^{\circ}C$, that for methylan production was 3$0^{\circ}C$. The methanol concentration above 4% completely inhibited the cell growth. The initial methanol concentration for the maximal production of methylan was 0.5% (v/v) and above this concentration, methylan production was markedly inhibited. To overcome the substrate toxicity and inhibition for both cell growth and methylan production, a fed-bach culture of intermittent feeding within 5 g/l methanol was conducted under the optimal culture condition. Methylan production of was stimulated by nitrogen limitation and methylan was accumulated up to 8.7 g/1 and cell mass also increased up to 12.4 g/l.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.4
• /
• pp.489-496
• /
• 2014

High levels of extracellular xylanase activity (211.79 IU/mg) produced by Paenibacillus sp. NF1 were detected when it was submerged-cultured. After three consecutive purification steps using Octyl-Sepharose, Sephadex G75, and Q-Sepharose columns, a thermostable xylanase (XynNF) was purified to homogeneity and showed a molecular mass of 37 kDa according to SDS-PAGE. The specific activity of the purified XynNF was up to 3,081.05 IU/mg with a 14.55-fold purification. The activity of XynNF was stimulated by $Ca^{2+}$, $Ba^{2+}$, DTT, and ${\beta}$-mercaptoethanol, but was inhibited by $Fe^{2+}$, $Zn^{2+}$, $Fe^{2+}$, $Cu^{2+}$, SDS, and EDTA. The purified XynNF displayed a greater affinity for oat spelt xylan with the maximal enzymatic activity at $60^{\circ}C$ and pH 6.0. XynNF, which was shown to be cellulose-free, with high stability at high temperature ($70^{\circ}C-80^{\circ}C$) and low pH range (pH 4.0-7.0), is potentially valuable for various industrial applications. The enzyme hydrolyzed oat spelt xylan to yield mainly xylooligosaccharides (95.8%) of 2-4 degree of polymerization (DP2-4). Moreover, the majority of the xylooligosacharides (DP2-4) products was xylobiose (61.5%). The thermostable xylanase (XynNF) thus seems potentially usefull in the production of xylooligosaccharides.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.141-148
• /
• 2010

Feasibility of floating aquatic plants (Eichhornia crassipes and Water dropwort) was investigated in order to control of sewage depending on various initial loading in a lab scale test. In addition, field test was conducted to assess the uptake rate of nutrient by E. crassipes. Lab-scale test applying primary domestic effluent operated at 4 day HRT shows that the highest uptake rates were 1.06 g N/$m^2{\cdot}day$ and 0.39 g P/$m^2{\cdot}day$ in the E. crassipes reactor. BOD removal efficiency in E. crassipes reactor was as high as 80% when the loading value was lower than 185 kg BOD/$ha{\cdot}day$. While 70 ~ 80% removal efficiency of BOD was achieved when the loading value was lower 80 kg BOD/$ha{\cdot}day$ at the W. Dropwort reactor. Experiment results show that E.crassipes has a higher nutrients removal efficiency than W. dropwort under high pollutant loading. Input loadings of TN and TP should not exceed to 10 kg TN/$ha{\cdot}day$ and 2.0 kg TP/$ha{\cdot}day$ respectively to provide a 50% TN and 80% TP removal efficiencies using E. crassipes. The field test demonstrated that an annual yield of E. crassipes mass was estimated as a fresh weight of 30.9 $m^3/ha{\cdot}yr$. E. crassipes grown in field pads absorbed 76.7 kg N/$ha{\cdot}yr$ and 13.4 kg P/$ha{\cdot}yr$ as a dry weight.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.149-154
• /
• 2007

An antibacterial substance to the Streptococcus mutans, a causative bacterium for decayed teeth, was isolated from the dried sea mustard, Undaria pinnatifida, and identified by GC and GC/MS. Acetone extract from the sea mustard (10.4 kg), was evaporated and partitioned to 4 fractions such as hexane, chloroform, butanol and water. The most active chloroform fraction were further purified through basic alumina, silicic acid and ODS column, successively, and finally, 3 antibacterial substances were isolated on the HPLC attached ODS column by using 95% MeOH and guided with UV detector (254 nm). Antibacterial substances (total 160mg, yield $1.5\times10^{-3}$%) had the same Rf value (0.42) on the TLC developed hexane diethyl ether acetic acid (80:30:1) and those methyl esters moved to 0.95. They were identified as the same unsaturated fatty acid, $C_{18:4,\;n-3}$ (3,6,9,12-octadecatetraenoic acid, stearidonic acid) compared relative retention times (15.5 min) with authentic fatty acid on the GC chromatogram. It was further confirmed unambiguously on the GC/MS giving molecular ion peak at m/z 290 which coincided with its methyl ester.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.201-208
• /
• 2007

Functional oils (FOs) were produced from commercial diacylglycerol oil and red yeast rice extracts from 80% ethanol for 1 hr in a shaking water bath at $35^{\circ}C$ and 175 rpm. FOs contained (A) 600, (B) 1200, (C) 1800, and (D) 2280 ppm of red yeast-rice extracts, respectively. The Hunter a value and b value were risen whereas L value was reduced along with the increase of extract concentration. Content of monacolin K and total phenolic compounds in FOs significantly increased according to the increase of extract concentration. The oxidation stability of FOs was observed by Rancimat at $98^{\circ}C$. Induction time decreased according to the increase of extract concentration. The major volatile compounds of FOs were compared using the electronic nose (EN) system and solid phase microextraction (SPME) method combined with gas chromatograph/mass spectrometry (GC/MS). EN was composed of 12 different metal oxide sensors. Sensitivities (Rgas/Rair) of sensors from EN were analyzed by principal component analysis (PCA), whose proportion was 99.66%. For qualitative or quantitative analysis of volatile compounds by SPME-GC/MS, the divinylbenzene/carboxene/polydimethyl-siloxane fiber and sampling temperature of $50^{\circ}C$ were applied.