• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.248-256
• /
• 1993

본 연구에서는 연속계의 진동모드를 구하여 일반질량(generalize mass)을 유 동하였으며 집중, 분포질량 변경에 따른 일반질량 변화량을 산출하여 감도계수를 구하 는 새로운 연속계 감도해석 방법을 제안하였고, 타당성을 검증하기 위해 외팔보, 계단 보에 적용하여 감도계수, 고유진동수, 진동모드, 전달함수의 변화량을 예측하고 이론 치와 비교하였다. Fig.1은 본 연구의 흐름도를 나타낸다.

• Earthquakes and Structures
• /
• 제7권3호
• /
• pp.385-400
• /
• 2014

Pounding damage to bridges and buildings is observed in most major earthquakes. The damage mainly occurs in reinforced concrete slabs, e.g. building floors and bridge decks. This study presents the results from pounding of reinforced concrete slabs. A parametric investigation was conducted involving the mass of the pendulums, the relative velocities of impact and the geometry of the contact surface. The effect of these parameters on the coefficient of restitution and peak impact acceleration is shown. In contrast to predictions from numerical force models, it was observed that peak acceleration is independent of mass. The coefficient of restitution is affected by the impact velocity, total participating mass and the mass ratio of striker and struck block.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1485-1495
• /
• 1997

The present study investigates heat/mass transfer around film cooling jets and circular cylinders to compare the characteristics of each other. Experiments are conducted to obtain the detailed heat/mass transfer coefficients of flat plate with injections through an array of holes and for flows around an array of protruding circular cylinders using the naphthalene sublimation technique. The inclination angles of cylinders are set to the same ones of jets; a, the angle between the jet and the surface is fixed at 30 deg. through the whole experiments and .betha., the angle between the projection of the jet on the surface and the direction of main stream is adjusted to 0 deg., 45 deg. and 90 deg. to investigate the effect of variation of injection angles. The influence of blowing rates of jets and those of cylinder length to diameter ratios are also investigated. The results indicate that the increase of angle .betha. influences the spanwise uniformity of heat/mass transfer remarkably for both jets and cylinders, but that variation of cylinder length to diameter ratios has weaker effects on heat/mass transfer coefficients than that of blowing rates.

• Animal cells and systems
• /
• 제3권1호
• /
• pp.29-39
• /
• 1999

Current data on reproductive characters of endemic and native species are essential to provide a strategy for the conservation of these species. Red pine (Pinus densiflora Sieb. & Zucc.) is one of the dominant, native tree species in Korea, but its reproductive ecology is not well-known. In 1997, the pattern of variation in cone and seed yields contributing to the conservation of declining populations of red pines was examined. Plant height and dbh were measured, and several new cones were collected from each tagged tree after counting the number of cones on each tree. For a subset of cones sampled, the number of fertile scales, the number of seeds at three development stages (early/late aborted, and filled seed), seed wing size, wing color, and individual filled seed mass were measured. The three sites which differed significantly in mean plant size also differed in mean cone and seed production per plant. However further analyses showed that most variation in characters examined occurred among plants within sites, but not among sites. An average of 90% of the potential seeds on the cones aborted at an early developmental stage, demonstrating that early abortion is a major factor affecting the number of filled seeds per cone. Individual seed mass was the only character which exhibited significant variations among sites as well as among trees within sites. Individual seed mass was overall negatively correlated with both the percentage of late abortion and the number of old cones per plant, suggesting that both the past and current years' reproductive activities have caused variations in seed mass. The potential dispersal distance of red pine seeds is quite large. However, wing loading was correlated with seed mass and number in a complex pattern across the sites. Distribution of seeds with varied colored wings differed among sites and among trees within sites. These results suggest that red pines at different sites might possess different strategies to cope with selection pressures acting during the final phase of reproduction, from seed dispersal to establishment. Then the ‘fitted’ red pine trees at each site should be identified and managed to conserve or restore populations.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.637-654
• /
• 2011

The present paper studies the variation of the natural frequencies and mode shapes of rectangular plates carrying a three degree-of-freedom spring-mass system (subsystem), when the subsystem changes (stiffness, mass, moment of inertia, location). An analytical approach based on Lagrange multipliers as well as a finite element formulation are employed and compared. Numerically reliable results are presented for the first time, illustrating the convenience of using the present analytical method which requires only the solution of a linear eigenvalue problem. Results obtained through the variation of the mass, stiffness and moment of inertia of the 3-DOF system can be understood under the effective mass concept or Rayleigh's statement. The analysis of frequency values of the whole system, when the 3-DOF system approaches or moves away from the center, shows that the variations depend on each particular mode of vibration. When the 3-DOF system is placed in the center of the plate, "new" modes are found to be a combination of the subsystem's modes (two rotations, traslation) and the bare plate's modes that possess the same symmetry. This situation no longer exists as the 3-DOF system moves away from the center of the plate, since different bare plate's modes enable distinct motions of the 3-DOF system contributing differently to the "new' modes as its location is modified. Also the natural frequencies of the compound system are nearly uncoupled have been calculated by means of a first order eigenvalue perturbation analysis.

• 한국해양환경ㆍ에너지학회지
• /
• 제10권1호
• /
• pp.59-65
• /
• 2007

최근 지구온난화로 인하여 동해안 어족 자원의 감소와 변화, 해저 식생의 아열대화와 같이 동해 연안 생태계의 급격한 변화가 주목되고 있다. 따라서 본 연구에서는 1960년도부터 2005년 사이 지난 45년 동안 매년 월별로 정선해양관측한 수온, 염분, 용존산소 등의 자료를 분석하여 동해 연안에 존재하는 해수 수괴들의 특성과 지구온난화로 인한 수괴별 물리, 화학적 특성 변화를 고찰하였다. 전 수괴의 수온이 지난 45년 동안 상승하였으며, 대마난류계수(약 $1.6^{\circ}C$ 상승)보다 북한한류계수(약 $2.33^{\circ}C$)의 상승폭이 약 1.5배 크며, 기후변화의 직접적인 영향을 받는 대마난류계 표층 수온의 상승폭이 $2.57^{\circ}C$로 기온 변화폭 보다 크다. 이는 육상상태계보다 연안 생태계의 아열대화가 훨씬 빠른 속도로 진행될 수 있음을 암시한다. 반면, 표층수의 염분은 기온상승과 더불어 강수량의 증가 추세로 지난 45년 동안 약 $0.29\%_{\circ}$ 감소하였다. 용존산소농도는 전 수괴에서 감소하는 추세이며, 특히 수온 상승폭이 큰 북한한류계수의 용존산소농도 감소가 년 간 0.021 mg/l로 가장 크다. 동해고유수의 용존산소 감소는 수온 증가와 더불어 동해 내부해양순환 시스템의 변화를 암시하며, 차후, 수온 상승과 함께 연안 수산 생물의 서식환경에 부정적인 요인으로 작용할 것이다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.114-120
• /
• 2000

EHL analysis of connecting rod bearing is proposed which includes effects of temperature variation in lubrication film. Lubrication film temperature is treated as a time-dependent, two-dimensional variable which is averaged over the film thickness, while connecting rod big end temperature is assumed to be time-independent and three-dimensional. It is assumed that a portion of the heat generated by viscous dissipation in the lubrication Him is absorbed by the film itself, and the remainder flows into the bearing surface. Mass-conserving cavitation algorithm is applied and the effect of variable viscosity is included to solve the Reynolds equation. Simulation results of the connecting rod bearing of internal combustion engine are presented. It is shown that the temperature variation has remarkable effects on the bearing performance. It is concluded that the EHL analysis considering effects of the temperature variation is strongly recommended to predict the bearing performance of connecting rod big end On internal combustion engine.

• 천문학회지
• /
• 제47권3호
• /
• pp.99-104
• /
• 2014

We present the rst period variation study for the Algol eclipsing binary V346 Cyg by constructing the (O-C) residual diagram using all the available precise minima times. We conclude that the period variation can be explained by a sine-like variation due to the presence of a third body orbiting the binary in about $68.89{\pm}4.69$ years, together with a long-term orbital period decrease ($dP/dt=-1.23{\times}10^{-7}day/yr$) that can be interpreted to be due to slow mass loss from the ${\delta}$-Scuti primary component. The sinusoidal variation may also be explained by using the the Applegate (1992) mechanism involving cyclic magnetic activity due to star-spots on the secondary component. The present preliminary solution needs more precise photometric observations to be confirmed.

• Tribology and Lubricants
• /
• 제17권3호
• /
• pp.228-235
• /
• 2001

EHL analysis of connecting rod bearing is proposed which includes effects of temperature variation in lubrication film. Lubrication film temperature is treated as a time-dependent, two-dimensional variable which is averaged over the film thickness, while connecting rod big end temperature is assumed to be time-independent and three-dimensional. It is assumed that a portion of the heat generated by viscous dissipation in the lubrication film is absorbed by the film itself, and the remainder flows into the bearing surface. Mass-conserving cavitation algorithm is applied and the effect of variable viscosity is included to solve the Reynolds equation. Simulation results of the connecting rod bearing in internal combustion engine are presented. It is shown that the temperature variation has remarkable effects on the bearing performance. It is concluded that the EHL analysis considering effects of the temperature variation is strongly recommended to predict the connecting rod bearing performance in internal combustion engine.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1115-1122
• /
• 2004

The paper discussed the effect of a tip mass on the stability of pipes on elastic foundations. Governing equations of motion are derived by extended Hamilton's principle, and the numerical scheme using finite element method is applied to obtain the discretized equations. With or without internal damping, the critical flow velocities of the pipes are investigated according to the variation of elastic foundation parameters and tip mass ratios. Also. the relationship between the eigenvalue branches and the corresponding flutter modes of the cantilevered pipes with a tip mass on the elastic foundations is fully investigated.