• 대한가정학회지
• /
• 제45권3호
• /
• pp.11-21
• /
• 2007

So far, the graphics of Korean clothing have focused on maintenance of forms without specific improvement. In particular, in the archetypal design of a Jeogori, ambiguous standards on the overlapping of left and right collars and collar strips cause problems in the teaching and teaming of Korean traditional clothing. As a result, the graphics of men's Durumagis based on a Korean Jeogori have the same problems as Jeogoris and the connection between them has not been sufficiently studied. Design of "Moo" in respect to graphics of men's Durumagis has its own calculation equation or measures, but they can not be generalized. This study therefore considers the existing graphics of men's Durumagis or approaches of Moo in different angles by reviewing the connection between Durumagis and Jeogoris. Therefore, archetypal forms of Durumagis are designed with a radius of a circle using one's height and the girth of one's chest, which contributes to symmetry of the collars and teaming effects through scientific graphics of "Moo." It is further expected that can be mass-produced through archetypal design of overcoats and graphics of "Moo" of Durumagis that can be standardized as well as connection between graphics of Jeogoris and Jeogoris.

• 한국작물학회지
• /
• 제45권1호
• /
• pp.44-49
• /
• 2000

This study was conducted to assess the allelopathic potentiality of Korea traditional seventy-nine rice (Oryza sativa L.) cultivars on barnyardgrass (Echinochloa crus-galli P. Beauv. var. oryzicola Ohwi) and to identify possible allelopathic compounds from selected rice cultivars, such as Seogandodobyeo, Huadobyeo and Heugbalbyeo. In the straw mixture, Seogandodobyeo showed the greatest inhibition (67.07%) on total emergence percentage. The greatest inhibition on total seedling length and dry weight of barnyardgrass occurred in Huadobyeo (58.32 %) and Heugbalbyeo (81.20%), respectively. An HPLC analysis with nine standard compounds showed that the concentrations and compositions of allelopathic compound depend upon the cultivars. Four compounds including Ο-coumaric acid in Seogandodobyeo extracts, four compounds including p-coumaric acid in Huadobyeo extracts, and seven compounds including Ο-coumaric acid in Heugbalbyeo were detected, respectively. Ο-coumaric acid (0.97 mg/g) in Seogandodobyeo, p-coumaric acid (0.92mg/g) in Huadobyeo and Ο-coumaric acid (1.02 mg/g) in Heugbalbyeo was detected as the highest amounts, respectively. The preliminary identification by HPLC analysis resulted in peaks with retention times close to those of standards which were confirmed with EI/MS. The mass spectra of p-coumaric, and Ο-coumaric acids showed molecular ions (m/z) at 164 and 164, and their base peaks (m/z) at 164 and 118, respectively.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.203-212
• /
• 1999

This paper describes a deadweight force standard machine with the weight change mechanism which can be used as a primary force standards at a national metrology institute. Since commercial deadweight force machine can generate forces by hanging weights to the weight supporter serially, force steps from deadweight force measuring devices of each having different capacity. In order to increase the force steps, we have specially designed a weight mechanism in which the machine can select the necessary weights and generate the load by hanging the selected weights to the weight supporter. The machine can generate 속 force of the range of 2 kN to 110 kN with force step of 1 kN. All weights have been accurately compensated and calibrated by a mass comparator and its standard uncertainty is less than 2.2 ${\times}\;10^{-6}$. The relative expanded uncertainty of the machine is 1.3 ${\times}\;10^{-5}$.

• 한국의류학회지
• /
• 제30권1호
• /
• pp.59-70
• /
• 2006

This study has analyzed females' motives and psychological experiences related to appearance-enhancement seeking behavior(weight control practice and cosmetic surgery). In this study, in-depth interviews were carried out to 11 females who had experienced weight control practices and cosmetic surgery in June 2001. There is social standard in ideal body image. One perceive a physical idea and own body through society(mass media, reference group), others and clothing, and recognize the ideal body and internalize the social standard as own worth. The discrepancies between ideal body image internalized as standards of own worth and real body image became a setup for body dissatisfaction. Increasing in body dissatisfaction, rejection of own body grow, furthermore body is perceived with distortion. In order to remove a negative body image and to reach ideal body image, appearance-enhancement seeking behavior such as weight control and cosmetic surgery is made. By appearance enhancing, one come to closer to ideal image of which one pursuit oneself. Therefore body satisfaction feeling increase, self·esteem rise, manner of life and character change to with affirmation. Otherwise, strengthening of appearance-concern and of appearance enhancement seeking desire has the possibility of developing into bulimia and cosmetic surgery addiction. Also, the standard of beauty in appearance rise by degrees, and that produces motives of appearance-enhancement seeking behavior.

• 한국의류학회지
• /
• 제36권7호
• /
• pp.663-676
• /
• 2012

This article is to understand the implications and ideological meaning of female normative beauty reproduced by the idealizing phenomena of the hyper-real body as a process of the normalization of the body projected in fashion magazines with a focus on the body created by the increased influence of mass media in consumer capitalism. This study conducts a literature research and semiotic analysis as the method of investigation and focuses on the body images of the beauty articles in Vogue Korea. The idealizing phenomena of the hyper-real body in fashion magazines emphasizes that the body is an exchangeable substance that can be disassembled to adjust to accord with the standards and norms of society, that the ability of individuals to manage their body is enhanced by a rise in social class, and concludes that the superficial alteration of the body image is related to the standard of a moral tendency where a young and slender figure is considered to be a well managed body image.

• 약학회지
• /
• 제47권3호
• /
• pp.142-147
• /
• 2003

Gas chromatography-mass spectrometric (GC-MS) procedure is presented for the simultaneous qualification and quantitation of methamphetamine (MA), amphetamine (AMP), 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA), and 3,4-methylenedioxyethylamphetamine (MDEA) in human hair. The method procedure involves decontamination of hair with distilled water and acetone, acidic hydrolysis, extraction in the presence of deuterated internal standards, and GC-MS analysis after derivatization with trifluoroacetic anhydride (TFAA) in ethylacetate. The limit of detection for 5 drugs were about 0.1∼0.15 ng/mg using 30 mg hair sample. Coefficient variations of correlation ranged from 0.9941 to 0.9993. The recoveries of these drugs were found to be 93.4∼104.4％. The concentrations of AMP, MA, MDA, and MDMA in abusers' hair samples were measured 0.17∼2.88, 2.09∼18.34, 0.24∼3.83, and 3.10∼22.81 ng/mg, respectively. The ratios of MA/AMP and MDMA/MDA ranged 5.67∼49.57 and 4.78∼54.31, respectively. This assay has been successfully utilized in the evaluation of the deposition of amphetamine-type stimulants (ATS) in human hair.

• 한국CDE학회논문집
• /
• 제16권2호
• /
• pp.83-91
• /
• 2011

There are many researches to make low-energy building. Lots of them focus on facility systems and insulation performance of building materials. However, not only systematic solutions but also approaches in early design stages are important to reduce energy consumption. Using BIM(Building Information Modelling) is considered as an effective and efficient way to simulate building energy and decide alternatives than traditional energy simulation because BIM based energy simulation makes to reduce much time for energy modeling. This study focuses on development of optimized geometry for super tall office buildings in Seoul, Korea. Specifically, length to width ratio and building orientation are main topics of this study because these two topics are the most basic and preceding factors deciding mass design. In this study, Revit MEP 2011 and Ecotect Analysis 2011 are used to make case models and calculate energy load in early design stages. Energy properties of material abide by Korean Standards for Energy Conservation in Building, Korean Guideline for Energy Conservation in Public Office and ASHRAE Standard in USA. This study presents best length to width ratio of plan and optimized orientation by evaluating the case models. Furthermore, this study suggests what should be considered for each case to decrease energy load.

• 토지주택연구
• /
• 제10권3호
• /
• pp.67-75
• /
• 2019

The modular construction means that more than 70% of the parts such as walls, windows, electrical wiring, facility piping, bathrooms, and kitchen appliances are pre-assembled at the factory and transported to the site. It is possible to shorten the construction period than general construction work and to secure high quality through modular mass production since the modular construction works in the field at the same time as the modular production. However, there are only four domestic modular manufacturers, and each company's modular components and construction methods are different, so it is necessary to standardize them. Therefore, this study investigated the construction process centering on the stacking method of modular housing construction work applied to D site in Cheonan-si, and proposed the key points of quality management by construction stage. As the project was conducted as a pilot project for government R&D projects, some differences may occur from general modular housing construction. However, the construction process and quality control focus of each unit box type modular house analyzed in this study can be used as basic data in the future of modular housing construction. In addition, the results of this study can be used to establish construction standards, such as the development of checklists and establishment of standard processes.

• 설비공학논문집
• /
• 제23권4호
• /
• pp.297-302
• /
• 2011

According to the standards for district heating substation established by Korea District Heating Corporation, water heating supply systems at over 150 Mcal/h capacity must employ the 2-stage heat exchanger that improves the system efficiency by reusing the heat included in the return water of district heating system already used for space heating. In this paper, the operating characteristics of the system in accordance with the load distribution of two heat exchangers for pre-heating and re-heating cold city water are investigated. The results including mass flow rate, return temperature etc. help to manage district heating system economically.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.539-544
• /
• 2006

Proton transfer reactions and ion-molecule reactions of bifunctional ethanes of $H_2NCH_2CH_2NH_2$, $H_2NCH_2CH_2OH$, and $HOCH_2CH_2OH$ were studied using Fourier transform mass spectrometry (FTMS). The rate constants for proton transfer reactions between the fragment ions and neutral molecules were obtained from the temporal variation of the ion abundances. The rate constants were consistent with the heats of reaction. The fastest proton transfer reactions were the reactions of $CH_2N^+$, $CHO^+$, and $CH_3O^+$ for $H_2NCH_2CH_2NH_2$, $H_2NCH_2CH_2OH$, and $HOCH_2CH_2OH$, respectively. The $[M+13]^+$ ion was formed by the ion-molecule reaction between $H_2C=NH_2 ^+$ or $H_2C=OH^+$ and the neutral molecule. The major product ions generated from the ion-molecule reactions between the protonated molecule and neutral molecule were $[2M+H]^+$, $[M+27]^+$, and $[M+15]^+$.