• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.460-466
• /
• 2015

An isotope dilution liquid chromatography tandem mass spectrometry was developed as a primary method for the quantitative analysis of cholesterol in infant formula. Cholesterol-d₄ was used as an internal standard and spiked into the infant formula sample. In order to release cholesterol out of cholesteryl ester, which is cholesterol bound to fatty acids in infant formula, saponification was carried out. Saponification conditions were optimized with heating temperature, reaction time and the concentration of KOH. The optimum conditions were as follows; heating temperature was 70 ℃, reaction time was 180 min and the concentration of KOH was 0.8 mL of 8 M KOH for about 0.1 g infant formula sample. Extraction of cholesterol out of sample solution was carried out with hexane uisng liquid-liquid extraction. Chromatographic analysis was carried out using Phenomenex Kinetex C₁₈ column. Mobile phase was 0.1% acetic acid in methanol/water (v/v, 99/1) and flow rate was 0.3 mL/min. Cholesterol and cholesterol-d₄ were monitored at mass transfer m/z 369/259 and 373/263 respectively. Reproducibility of the method was evaluated to be 0.23% of the measurement result. The expanded uncertainty of the measurement result of cholesterol in infant formula was approximately 1.9% at a 95% confidence level. NIST standard reference material having certified values of cholesterol in infant formula, was analyzed in order to verify this method. The ID-LC/MS/MS results were well agreed with the certified values of NIST SRM within the uncertainty.

• Analytical Science and Technology
• /
• v.25 no.1
• /
• pp.25-32
• /
• 2012

Isotope dilution mass spectrometry (ID-MS) based on liquid chromatography tandem mass spectrometry (LC/MS/MS) was developed for the accurate determination of sorbic acid in tea-drink. An isotope analogue of sorbic acid, $^{13}C_2$-sorbic acid, was obtained by custom synthesis. MS was operated in the negative mode with selected reaction monitoring (SRM) mode of $[M-H]^-$ ${\rightarrow}$ $[M-CO_2H]^-$ channel at m/z 111 ${\rightarrow}$ 67 for sorbic acid and at m/z 113 ${\rightarrow}$ 68 for its isotope analogue. Chromatographic separation was accomplished with a C18 column and an isocratic mobile phase of 55% of 50 mM ammonium acetate (pH 4.5) and 45% of methanol. Homogeneous reference materials were prepared for validation of this method, including repeatability and reproducibility tests, by fortifying tea-drink with sorbic acid in our laboratory. Repeatability and reproducibility studies showed that the ID-LC/MS method is a reliable and reproducible method which provides less than 3.8% of relative standard deviation (RSD) for the analysis of sorbic acid.

• Analytical Science and Technology
• /
• v.23 no.6
• /
• pp.524-530
• /
• 2010

Chloramphenicol is one of the most effective antibiotics for treatment of food-producing animals for typhoid fever. However, it has been reported that it caused severe side effects such as aplastic anemia in human, therefore the use of chloramphenicol for food-producing animal is prohibited by European Union and other countries. In this study, the analytical method using isotope dilution liquid chromatography-mass spectrometry (ID-LC/MS) was established for accurate determination of chloramphenicol in meat. Chloramphenicol was extracted with ethylacetate from porcine and solid phase extraction cartridge was used for enhancing the recovery. The residue of chloramphenicol in porcine was analyzed using the liquid chromatography mass spectrometer (LC/MS) interfaced with electrospray ionization source. Analysis was performed in negative mode with selected reaction mornitoring mode at m/z 321${\rightarrow}$257 of $[M-H]^-$ ${\rightarrow}$ $[M-H-(HCOCl)]^-$ and m/z 326 ${\rightarrow}$ 262 channels for its isotope. The established method was tested using fortified samples at the level of 0.2 1, 10, $25\;{\mu}g$/kg and analytical results agreed with the gravimetrically fortified values within their uncertainties. This method was validated by analyzing a certified reference material, BCR 445, from IRMM (Institute for Reference Materials and Measurement). Our measurement values agreed with the certified value within their uncertainties. The uncertainty of our measured value was much lower than that the certified value from IRMM.

• Journal of the Korea Furniture Society
• /
• v.26 no.1
• /
• pp.1-11
• /
• 2015

This study shows how the plastic furniture design has developed in general and by contemporary auteurist designers. Plastic furniture design began with Mies van der Rohe's chairs produced with compression moldings, and was later successfully commercialized by Knoll and Herman Miller. Plastic undoubtedly played a significant role in giving modern furniture design its current status with its suitability for efficient mass-production. However, the expectations consumers have for designers have extended by the widespread internet accessibility along with the higher standards of the well-developed design industry, and now mass-production is no more the only key to appealing to those in need. Based on the information gathered from the process above, analyses were done on the works of various design artists in the current industry, which leads to certain suggestions that would help bring the plastic furniture design to the next level as a whole.

• Analytical Science and Technology
• /
• v.30 no.2
• /
• pp.68-74
• /
• 2017

The volatile components in 'Fuji' apple were effectively determined by a headspace solid-phase microextraction (HS-SPME) combined with gas chromatography-mass spectrometry (GC-MS). A total of 48 volatile components were identified and tentatively characterized based on National Institute of Standards and Technology (NIST) MS spectra library and the Kovats GC retention index I (RI). The harvested Fuji apples were divided into two groups: 1-methylcyclopropene (1-MCP) treated and non-treated (control) samples for finding important indicators between two groups. The major volatile components of both apples were 2-methylbutyl acetate, hexyl acetate, butyl 2-methylbutanoate, hexyl butanoate, hexyl 2-methylbutanoate, hexyl hexanoate and farnesene. No significant differences of these major compounds between 1-MCP treated and non-treated apples were observed during 1 month storage. Interestingly, the amount of off-flavors, including 1-butanol and butyl butanoate, in 1-MCP treated apples decreased over 5 months, and then increased after 7 months. However, non-treated apples did not show significant changes for off-flavors during 7 month storage (p<0.05). The non-treated apples also contained the higher levels of two off-flavors than 1-MCP treated apples. These two compounds, 1-butanol and butyl butanoate, can be used as quality indicators for the quality evaluation of Fuji apple.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.400-409
• /
• 2001

A method for the analysis of most common phthalate acid esters (9 secies) in biota samples by gas chromatography-mass spectrometry-selected ion monitoring mode is described. Phthalates in biota samples are extracted by organic solvent and purified by Florisil column. Phthalates are easily contaminated during extraction prodedure. Since the extraction and cleanup steps for biota samples generally are more complicate than those for water or sediment samples, we compared with contamination state of each sample work-up step. By applying this developed method, the overall recoveries ranged between 79 - 117% in biota sample which was spiked with standards. For phthalates used in this study, the quantitaive accuracy, elution pattern on Florisil column, and detection limits were also investigated.

• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.550-558
• /
• 2010

Russian Constructivism, which took the lead in the Russian trend of art until the late 1920's, was influenced by European Cubism and Futurism. Breaking away from the previous realistic tendency, Russian Constructivism, to meet the ideology of the revolution, insisted the "Art into Street" and the "Art in Industry" with its abstract and geometric design. Russian Constructivism effected paintings of mid 1920's, as well as Industrial design and costume design. This operated remarkable changes in Russian form of costume and textile area. An unusual situation like revolution had provided the social justification to develop a new costume design not for the special class of people, but for the general public. In this atmosphere, the plan of clothing mass production began to progress. Although the Russian Constructivism costume of arts shows the similarity in the trend of fashion and the physical forms of those days, its fundamental idea in manufacturing costumes was 'to create costumes to be possible to mass-produce and to be wearable to anyone regardless of the social class'. Therefore, Constructivism costume of arts pursued dynamism and geometric form through non-objective design that has broken away from the handcrafted and traditional standards of the past. These distinct characteristics served as a momentum to seek costume design based on productivity and functionality.

• Journal of the Korean Chemical Society
• /
• v.38 no.10
• /
• pp.726-733
• /
• 1994

Supercritical fluid extraction (SFE) followed by gas chromatographic separation and mass spectrometric (MS) detection were used in rapid analysis of polycyclic aromatic hydrocarbons (PAH's) in air particulate material extracted for 30 min with 10 ml of supercritical $N_2O$ without another sample preparation step. Two samples, urban dust in Seoul area and a certified air particulate reference material 1649 supplied by the NBS (National Bureau of Standards), were processed for the purpose of evaluating extraction and analysis methods. As a result, the quantitative recovery of PAH's in the SFE method was relatively lower than conventional organic solvent extraction methods, but reproducibility was resonable, and analysis time was reduced remarkably. The method has proved to be suitable for monitoring of PAH's in air particulate material.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.53.3-53.3
• /
• 2017

The pilot study of SLGT (Superconducting Low-frequency Gravitational-wave Telescope) is being performed by KKN (KASI-KISTI-NIMS) collaboration. In this presentation, we discuss prospectives of detecting GWs in the low-frequency band (0.1-10 Hz), which is a target frequency band of SLGT, but can be hardly observed by advanced LIGO. IMBHBs (Intermediate Mass Black Hole Binaries) and IMRIs (Intermediate Mass Ratio Inspirals) with total masses of O(1000) up to O(10,000) solar masses are most probable sources between 0.1-10 Hz. We estimate horizon distances and signal to noise ratios of IMBHBs and IMRIs for different SLGT design sensitivities. Based on our calculations, detection rates for IMBHBs and IMRIs with SLGT will be discussed.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.2
• /
• pp.44-49
• /
• 2015

This paper presents an evaluation scenario of safety performance for extraordinary service permission of autonomous vehicle driving on a motorway. Based on advanced driver assistance system (ADAS) which is already mass-production, an autonomous vehicle driving on motorway is tested on the public roads and also getting close to mass-production. Before the autonomous vehicle tested, the safety of autonomous driving system should be evaluated based on a proper test scenario. Prior to develop the test scenario, this paper reviews the licensing standards for an autonomous vehicle in California and Nevada, and the international regulations of each ADAS. To develop the scenario, the driving conditions of motorway are categorized into five modes and fundamental evaluation requirements of elements of autonomous driving system are derived. An evaluation scenario, which represents the real driving conditions, has been developed to assess the safety of autonomous vehicle. This scenario has validated by computer simulation using model predictive control (MPC) based autonomous driving algorithm.