• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권1호
• /
• pp.18.1-18.1
• /
• 2008

• 대한수학회지
• /
• 제33권1호
• /
• pp.39-46
• /
• 1996

Let $\alpha > 0$ and $\zeta$ be a point on the unit circle $T= {$\mid$z$\mid$ = 1}$ of the complex plane C.

• Advances in aircraft and spacecraft science
• /
• 제4권6호
• /
• pp.701-709
• /
• 2017

One of the components that used in the satellite thermal control subsystem is the Mechanically Pumped Fluid Loop (MPFL) system; this system mostly used in geosynchronous orbit (GEO) satellites, and can transfer heat from a hot point to a cold point using the fluid which circulated in a closed loop. Heat radiates to the deep space at the cold plate to cool down the fluid temperature. In this research, the radiative heatexchanger (RHX) for a MPFL system is optimized. The genetic algorithm has been used for minimizing the total mass and pressure drop by considering a constant transferred heat rate at the heat exchanger. The optimization has been done in two cases. In case I, two parameters are considered as a goal function, so optimization is performed using NSGA-II method. Results of optimization are shown in the pareto diagram. In case II, the diameter of pipe is considered constant, so the optimized value for distances of the parallel pipes is obtained by using the genetic algorithm, in which the system has the least total mass. Results show that in the RHX, by increasing the pipe diameter, pressure drop decreases and total mass increases. Also by considering a constant value for pipe diameter, an optimum distance between pipes and pipe length are obtained in which the system has a minimum mass.

• 천문학회지
• /
• 제43권4호
• /
• pp.105-113
• /
• 2010

We study the dynamical evolution of the M87 globular cluster (GC) system using the most advanced and realistic Fokker-Planck (FP) model.By comparing our FP models with both mass function (MF) and radial distribution (RD) of the observed GC system, we find the best-fit initial (at M87's age of 2-3 Gyr) MF and RD for three GC groups: all GCs, blue GCs, and red GCs. We estimate the initial total mass in GCs to be $1.8^{+0.3}_{-0.2}{\times}10^{10}M_{\bigodot}$, which is about 100 times larger than that of the Milky Way GC system. We also find that the fraction of the total mass currently in GCs is 34\%. When blue and red GCs are fitted separately, blue GCs initially have a larger total mass and a shallower radial distribution than red GCs. If one assumes that most of the significant major merger events of M87 have ended by the age of 2-3 Gyr, our finding that blue (metal-poor) GCs initially had a shallower radial distribution supports the major merger scenario for the origin of metallicity bimodality.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2108-2117
• /
• 1996

The purpose of this paper is to investigate the influence of the exciter attached for the measurement of natural frequencies when extracting the frequency response functions of the test structure in experimental modal analysis. The procedure is first to model the attached exciter as an additional degree of freedom system and next to verify the suggested model by experimentally extracting the natural frequencies of the test structure with various values of exciter mass, stinger stiffness and attachment position of the exciter on the test structure. It is concluded that as additional degree of freedom system which includes the natural frequency of the exciter itself and axial stiffness of stinger should be considered to quantatively define the coupling effects of structure-exciter interaction on the measured natural frequencies. It is not the mass of the exciter itself but the coupling effect of the additional degree of freedom mass-spring system consisting of exciter body and armature coil that characterizes the natural frequency deviation. Therefore, when the natural frequency of this additional mass-spring system is outside of the test frequency range, the coupling effect of structure-exciter interaction can be minimized.

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.491-505
• /
• 2010

A computational analysis of the nonlinear free vibration of corrugated annular plates with shallow sinusoidal corrugations under uniformly static ambient temperature is examined. The governing equations based on Hamilton's principle and nonlinear bending theory of thin shallow shell are established for a corrugated plate with a concentric rigid mass at the center and rotational springs at the outer edges. A simple harmonic function in time is assumed and the time variable is eliminated from partial differential governing equations using the Kantorovich averaging procedure. The resulting ordinary equations, which form a nonlinear two-point boundary value problem in spatial variable, are then solved numerically by shooting method, and the temperature-dependent characteristic relations of frequency vs. amplitude for nonlinear vibration of heated corrugated annular plates are obtained. Several numerical results are presented in both tabular and graphical forms, which demonstrate the accuracy of present method and illustrate the amplitude frequency dependence for the plate under such parameters as ambient temperature, plate geometry, rigid mass and elastic constrain.

• Smart Structures and Systems
• /
• 제4권1호
• /
• pp.85-98
• /
• 2008

In this paper, excitation systems using a linear mass shaker (LMS) and an active tuned mass damper (ATMD) are presented to simulate the wind induced responses of a building structure. The actuator force for the excitation systems is calculated by using the inverse transfer function of a target structural response to the actuator. Filter and envelop functions are used to prevent the actuator from exciting unexpected modal responses and an initial transient response and thus, to minimize the error between the wind and actuator induced responses. The analyses results from a 76-story benchmark building problem for which the wind load obtained by a wind tunnel test is given, indicate that the excitation system installed at a specific floor can approximately reproduce the structural responses induced by the wind load applied to each floor of the structure. The excitation system designed by the proposed method can be effectively used for evaluating the wind response characteristics of a practical building structure and for obtaining an accurate analytical model of the building under wind load.

• 전산구조공학
• /
• 제8권4호
• /
• pp.57-64
• /
• 1995

본 논문에서는 이동물체에 의해 가진 받는 보의 동적반응을 보다 용이하게 다룰 수 있는 간결한 수치해석 알고리즘을 제안하였다. 구조물과 이동물체를 각각 균일한 Euler보와 질점으로 모델링하여 보의 운동방정식을 유도하였으며 이 식을 유연영향함수를 이용하여 적분형 미분방정식으로 바꾸어줌으로써 수치해석에 적용할 수 있는 형태로 바꾸어 주었다. 유도된 운동방정식을 모우드 해석기법을 이용하여 수치해를 구하였으며 기존의 수치해석 연구결과들과 비교하여 본 연구결과의 타당성을 검증함으로써 본 연구에서 개발한 수치해석 알고리즘은 이동물체에 의해 가진받는 보의 초기 해석과 설계과정에서 효율적으로 사용할 수 있음을 보였다.

• 전산구조공학
• /
• 제10권3호
• /
• pp.217-223
• /
• 1997

본 논문은 집중 질량 구조물의 천이응답에 대한 시간영역 민감도 해석의 기본 개념을 설명한다. 외부 가진에 따른 구조물의 응답에 미치는 설계변수 변화의 영향을 구하기 위해 시간영역 민감도 함수를 구하는 방법을 제시하였다. 시간영역에서 구조물의 설계변수 민감도는 1차 표준 민감도 함수와 백분율 민감도 함수를 통해 확인하였다. 이러한 민감도 함수와 그 계산은 설계변수에 대한 시스템 상태변수의 편미분에 의한 것이다. 또한, 직접 미분법에 의한 해석적 방법의 편미분 결과와 수치적 방법에 의한 결과를 비교하였다.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.1071-1091
• /
• 2014

Pounding of adjacent structures are always a notable reason for damages after strong ground motions, but it is already unforeseen detail in newly constructed structures. Thus, several approaches have been proposed in order to prevent the pounding of structures. By using optimally tuned mass dampers, it is possible to decrease the displacement vibrations of structures. But in adjacent structures, the response of both structures must be considered in the objective function of optimization process. In this paper, two different designs of Tuned Mass Dampers (TMD) are investigated. The first design covers independent TMDs on both structures. In the second design, adjacent structures are coupled by a TMD on the top of the structures. Optimum TMD parameters are found by using the developed optimization methodology employing harmony search algorithm. The proposed method is presented with single degree of freedom and multiple degree of freedom structures. Results show that the coupled design is not effective on multiple degree of freedom adjacent structures. The coupled design is only effective for rigid structures with a single degree of freedom while the use of independent TMDs are effective on both rigid and flexural structures.