• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2001년도 춘계학술대회 발표논문집
• /
• pp.290-291
• /
• 2001

The relationship between velocity, viscosity, diffusion coefficient, mass transfer coefficient and characteristic length and mass transfer data can be correlated by dimensionless relationship in electrolytic process. The performance of dyestuff removal was decreased as the flow rate of electrolyte was increased. It was due to the effect of retention time decreasing was superior to that of turbulent inlet mixing. Sh/Sc$\^$1/3/ vs Re plot for Al flat electrode did not showed the general tendency of the relationship between Sh/Sc$\^$1/3/ and Re. It can be thought that flow rate was not sufficiently high to increase the effect of mixing.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.352-353
• /
• 2006

The effect of TiC content on oxidation behavior of the sintered WC-TiC-TaC alloys with 2 mass% TaC and different TiC amounts of 3-45 mass% was investigated through oxidation tests in air at 973K. As a result of the tests, it was revealed that with increasing TiC content in the alloys, mass changes caused by oxidation and thickness of the scale decreased. Thus, it is considered that the main component of the scales changed gradually from $WO_3$ to $TiO_2$ with increasing TiC content in the alloys, and oxygen diffusion through the scale to the alloys was inhibited gradually.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제6권
• /
• pp.56-66
• /
• 1998

The absorption process of water vapor in a liquid film is an important process in LiBr-Water absorption system. The composition of the gas phase, in which a non-absorbable gas is combined with the absorbate, influences the transport characteristics. In the present work, the absorption processes of water vapor into aqueous solutions of lithium bromide in the presence of non-absorbable gas are investigated. The continuity, momentum, energy and diffusion equations for the solution film and gas are formulated in integral forms and solved numerically. It is found that the mass transfer resistance in gas phase increases with the concentration of non-absorbable gas. However the primary resistance to mass transfer is in the liquid phase. As the concentration of non-absorbable gas in the absorbate increases, the interfacial temperature and concentration of absorbate in solution decrease, which results in the reduction of absorption rate. The reduction of mass transfer rate is found to be significant for the addition of a small amount of non-absorbable gas to the pure vapor, especially at the outlet of tube where the non-absorbable gas accumulates. At higher non-absorbable gas concentration, the decrease of absorption rate seems to be linear to the concentration of non-absorbable gas.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.194-201
• /
• 2004

In the present study, the improvement of absorption characteristics on combined heat and mass transfer process in a falling film of a vertical absorber by change of geometric parameters were studied experimentally and analytically. The energy and diffusion equations are solved simultaneously to give the temperature and concentration variations at the liquid solution-refrigerant vapor interface and at the wall. Absorption behaviors of heat and mass transfer were analyzed through falling film of the LiBr aqueous solution contacted by refrigerant vapor in the absorber. Effects of film Reynolds number, geometric parameters by insert device (spring) and flow pattern on heat and mass transfer performances have been also investigated. Especially, effects of the flow pattern by geometric parameters have been considered to observe the total heat and mass transfer rates through falling film along the absorber. As a numerical and experimental result, maximum absorption rate was shown at the wave-flow by insert device (spring). The error ranges between experiment and analysis were from 5.8 to 12％ at Re$_{f}$ > 100.0.

• Computers and Concrete
• /
• 제8권2호
• /
• pp.125-142
• /
• 2011

In the present paper, a numerical simulation method based on mesoscopic composite structure of concrete, the truss network model, is developed to evaluate the diffusivity of concrete in order to account for the microstructure of concrete, the binding effect of chloride ions and the chloride concentration dependence. In the model, concrete is described as a three-phase composite, consisting of mortar, coarse aggregates and the interfacial transition zones (ITZs) between them. The advantage of the current model is that it can easily represent the movement of mass (e.g. water or chloride ions) through ITZs or the potential cracks within concrete. An analytical method to estimate the chloride diffusivity of mortar and ITZ, which are both treated as homogenious materials in the model, is introduced in terms of water-to-cement ratio (w/c) and sand volume fraction. Using the newly developed approaches, the effect of cracking of concrete on chloride diffusion is reflected by means of the similar process as that in the test. The results of calculation give close match with experimental observations. Furthermore, with consideration of the binding capacity of chloride ions to cement paste and the concentration dependence for diffusivity, the one-dimensional nonlinear diffusion equation is established, as well as its finite difference form in terms of the truss network model. A series of numerical analysises performed on the model find that the chloride diffusion is substantially influenced by the binding capacity and concentration dependence, which is same as that revealed in some experimental investigations. This indicates the necessity to take into account the binding capacity and chloride concentration dependence in the durability analysis and service life prediction of concrete structures.

• 한국융합학회논문지
• /
• 제8권11호
• /
• pp.287-292
• /
• 2017

자동차 부품에 Zn의 전기도금이 적용되고 있다. Zn 도금은 내식성을 증가시키기 위해 두께를 증가시키고 있다. 도금층의 두께가 증가함에 따라 전기도금 층이 파괴되는 문제가 제기되고 있다. Zn계 합금의 전기도금은 내부식성 향상 및 도금 두께 감소를 위해 연구되어 있다. 여러 합금 도금 중에 Zn-Co 합금 도금은 많은 관심을 받고 있다. 본 연구에서는 온도, 전류 밀도 및 전해용액 속 Co 함량과 같은 다양한 제조 조건에서 Zn-Co 전착의 조성을 조사하여 시료의 Co 함량에 대한 전기도금 조건의 영향을 파악하였다. 그 결과는 음극 과전압 및 확산 계수에 의해 설명하였다. 전류 밀도가 증가하고, 전해액 온도가 감소하고, 전해액 농도가 감소함에 따라 음극의 과전압이 증가한다. 음극의 과전압이 증가함에 따라 활성화분극보다 농도분극이 중요하게 된다. 농도분극은 확산 층 내에서 물질 전달은 확산에 의해 결정된다. 일정한 농도분극에서는 확산계수가 큰 원소가 다량 확산하게 된다. 즉 음극의 과전압이 증가함에 따라 확산계수가 큰 Zn 함량이 증가한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권5호
• /
• pp.44-49
• /
• 2016

철근 콘크리트 구조물의 철근에 대한 부식을 발생시키는 다양한 유해 열화인자 중 염화물 이온(Cl-)은 침투로 인한 확산속도가 빠르고, 철근에 직접적으로 관여하여 부식을 야기시켜 매우 중요한 열화원인이다. 대형 콘크리트 구조물의 타설에서 불가피하게 발생하는 콜드 조인트는 전단력에 취약하여, 이는 내구적 열화에 대한 피해를 증가시키는 경향을 보인다. 본 연구에서는 콜드조인트를 가진 OPC(Ordinary Portland Cement) 콘크리트와 GGBFS(Ground Granulated Blast Furnace Slag) 염화물 촉진 실험으로 염화물 확산계수를 정량적으로 평가하였다. GGBFS 콘크리트에서는 $6.6{\times}10^{-12}m^2/sec$의 확산계수가 측정되었는데. 이는 OPC 콘크리트에 비하여 약 30% 수준의 낮은 확산계수값을 나타내었으며, 콜드조인트를 가진 콘크리트에서도 비슷한 경향이 관측되었다. OPC 건전부 콘크리트에 비하여 GGBFS 콘크리트의 염화물 확산계수는 건전부에서 0.30배, 콜드조인트부에서 0.39배 정도의 우수한 염해 저항성을 나타내었다.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.371-378
• /
• 2011

콘크리트는 다공질로서 수분이 접하게 되면 시간경과에 따라 흡수가 일어난다. 다양한 배합의 콘크리트에서 어느 정도 수분 흡수가 빨리 일어나는가는 흡수수분 확산계수 산출을 통하여 가능하며, 본 연구에서는 길이가 다른 시험체의 질량 경시변화를 통하여 깊이별 흡수 수분량을 산출하였다. 흡수 수분 확산계수는 시간과 깊이의 함수로 이뤄진 볼츠만 변수를 사용하여 실험값과의 회귀분석을 통하여 구하였으며, 그 정확도는 비선형 유한요소 과도해석을 통하여 검증하였다.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.228-236
• /
• 2015

Fluorescence recovery after photobleaching (FRAP) is a well-established method commonly used to measure the diffusion of fluorescent solutes and biomolecules in living cells or tissues. Here a fiber-optic-based FRAP (f-FRAP) system was developed, and validated using macromolecules in water and agarose gels of different concentrations. We applied f-FRAP to measure the site-specific diffusion of fluorescein (NaFluo) in peritoneal membranes (PMs) on the liver, cecum, and kidney of a living rat during peritoneal dialysis. Diffusion of fluorescein in PM varied in a time-dependent manner according to the type of organ ($D_{PM\;on\;Liver}/D_{NaFluo}=0.199{\pm}0.085$, $D_{PM\;on\;Cecum}/D_{NaFluo}=0.292{\pm}0.151$, $D_{PM\;on\;Kidney}/D_{NaFluo}=0.218{\pm}0.110$). The proposed method allows direct quantitative measurement of the three-dimensional diffusion in local PM in vivo, which was previously inaccessible by peritoneal function test methods such as peritoneal equilibration test (PET) and standardized PM assessment (SPA). f-FRAP is promising for local and dynamic assessments of peritoneal pathophysiology and the mass transport properties of PMs, presumed to be affected by variation of tissue structures over different organs and functional changes of the PM with years of peritoneal dialysis.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.