• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.380-390
• /
• 1998

In the present work a finite element formulation using dynamic explicit time integration scheme is used for numerical analysis of auto-body panel stamping processes. The lumping scheme is employed for the diagonal mass matrix and linearizing dynamic formulation. A contact scheme is developed by combining the skew boundary condition and direct trial-and-error method. In this work, for economic analysis the faster punch velocity and the mass scaling method are introduced. To investigate the effects of punch velocity and mass scaling, the various values of punch velocity and the various mass scalings are used for numerical analysis. Computations are carried out for analysis of complicated auto-body panel stamping processes such as forming of an oil pan and a fuel tank.

• Structural Engineering and Mechanics
• /
• 제39권5호
• /
• pp.733-750
• /
• 2011

Recently, identification of modal parameters using the response only data has attracted considerable attention particularly where the classic modal testing methods is difficult to conduct. One drawback of the response only data, also known as Operational Modal Analysis (OMA), is that only the unscaled mode shapes can be obtained which restricts the applications of OMA. The Mass change method is a usual way to scale the operational mode shapes. In this article a new method is proposed to optimize the additive mass for scaling of the unscaled mode shapes from OMA for which a priori knowledge of the Finite Element model of structure is required. It is shown that the total error of the scaled mode shapes is minimized using the proposed method. The method is validated using a numerical case study of a beam. Moreover, the experimental results of a clamped-clamped beam demonstrate the applicability of the method.

• Journal of the korean society of oceanography
• /
• 제38권1호
• /
• pp.11-16
• /
• 2003

The three dimensional structure of thermohaline circulation in a D-plane is investigated using a conceptual two layer model and a scaling argument. In this simple model, the water mass formation region is excluded. The upper layer represents the oceans above the main thermocline. The lower layer represents the deep ocean below the thermocline and is much thicker than the upper layer. In each layer, geostrophy and the linear vorticity balance are assumed. The cross interfacial velocity that compensates for the deep water mass formation balances downward heat diffusion from the top. From the above relations, we can determine the thickness of the upper layer, which is the same as thermocline depth. The results we get is basically the same as that we get for an f-plane ocean or the classical thermocline theory. Mass budget using the velocity scales from the scaling argument shows that western boundary and interior transports are much larger than the net meridional transport. Therefore in the thermohaline circulation, horizontal circulation is much stronger than the vertical circulation occuring on a meridional plane.

• 한국치위생학회지
• /
• 제15권6호
• /
• pp.1107-1116
• /
• 2015

Objectives: The purpose of this study was to examine awareness and satisfaction toward health insurance coverage of scaling. Methods: A self-reported questionnaire was completed by 221 patients receiving scaling service from July to August, 2014. The informed consent was approved after the explanation of purpose of the study. The questionnaire consisted of general characteristics of the subjects, awareness toward health insurance coverage of scaling, scaling service covered by health insurance, and satisfaction with health insurance service. Results: Those recognizing the health insurance service extension accounted for 87.3 percent and 67.4 percent answered that the appropriate coverage age would be 20 years old. The recommendable frequency of scaling was once a year and this accounted for 49.3 percent. Fifty percent of the subjects thought health insurance coverage of scaling would be reasonable and 34.8 percent acquired the information from mass media. The most common service providers were dental hygienists and the length of service was from 20 to 30 minutes. The contents of service included scaling service, toothbrushing method, and oral care. The satisfaction was 4.39 points. Conclusions: The health insurance coverage of scaling will improve the oral health and quality of life in Korean adults. So the government should try to extend the scaling coverage by health insurance and the frequency of scaling.

• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.485-500
• /
• 2023

The non-linear static analysis of reinforced concrete (RC) structures using the three-dimensional (3D) finite element method is a time-consuming and challenging task. Moreover, this type of analysis encounters numerical problems such as the lack of convergence of results in the stages of growth and propagation of cracks in the structure. The time integration analysis along with the mass scaling (MS) technique is usually used to overcome these limitations. Despite the use of this method in the 3D finite element analysis of RC structures, a comprehensive study has not been conducted so far to assess the effects of the MS method on the accuracy of results. This study aims to evaluate the accuracy of the MS method in the non-linear quasi-static finite element analysis of RC structures. To this aim, different types of RC structures were simulated using the finite element approach based on the implicit time integration method and the mass scaling technique. The influences of effective parameters of the MS method (i.e., the allowable values of increase in the mass of the RC structure, the relationship between the duration of the applied load and fundamental vibration period of the RC structure, and the pattern of applied loads) on the accuracy of the simulated results were investigated. The accuracy of numerical simulation results has been evaluated through comparison with existing experimental data. The results of this study show that the achievement of accurate structural responses in the implicit time integration analyses using the MS method involves the appropriate selection of the effective parameters of the MS method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.111.2-111.2
• /
• 2010

삼상슬러리 기포탑 반응기의 설계 및 Scale-up을 위하여 기포탑의 직경변화에 따른 기체-슬러리 계면에서의 물질전달 현상의 Similarity를 검토하고, 기체-슬러리 계면에서의 물질전달 현상과 슬러리 기포탑 반응기의 운전변수 및 반응물들의 물성들과의 연관성을 고찰하기 위하여 삼상슬러리 기포탑의 물질전달계(System)에서 주요 파라메타를 도출하였으며, 이들 파라메터들을 이용하여 슬러리 기포탑반응기의 물질전달 Scaling을 검토하였다. 물질전달계의 주요제어인자로는 기체-액체 부피물질전달계수($k_La$), 슬러리상의 확산도($D_{SL}$), 기포탑의 직경(D), 기포탑 반응기에 유입되는 기체의 유입속도($U_G$), 기포탑 반응기 내부의 연속상인 슬러리상의 표면장력(${\sigma}_{SL}$), 슬러리상과 기체상간의 밀도차(${\rho}_{SL}-{\rho}_G$) 그리고 슬러리상의 점도(${\mu}_{SL}$)등 슬러리 상의 물성을 선정하였으며 중력가속도(g)를 선정하였다. 물질전달계의 Scling을 검토하기위하여 이를 재구성하였으며 기포탑 반응기의 구조와 직경이 변화함에 따라 이들 무차원군의 변화양상을 고찰하였다. 실험적으로 측정된 물질전달계수와 Scaling에 의해 예측된 물질전달계수를 비교 검토함으로써 본 연구의 Correlation의 적용범위를 제시하였다.

• 천문학회보
• /
• 제40권2호
• /
• pp.48.3-49
• /
• 2015

Scaling relations of early-type galaxies (ETG) provide a deep insight into their formation and evolution. Interestingly enough, most relations extending into the dwarf regimes display non-linear or broken-linear features, unlike the linear relations for normal (i.e., intermediate-mass to giant) ETGs only. Here we investigate the mass-size scaling relation of ETGs using a massive database of galaxies from SDSS DR12. We divide ETGs into two groups by the indication of star formation such as colors, and examine their distinction along the mass-size relation. We find that the mass-size distribution of blue, young normal galaxies is in good agreement with that of dwarf ETGs. Our result suggests that blue, young normal ETGs may serve as links between (passive) normal ETGs and dwarfs. We discuss the possibility of blue, young ETGs being progenitors of dwarf ETGs.

• Animal cells and systems
• /
• 제2권4호
• /
• pp.477-481
• /
• 1998

Previous studies have postulated that isometric animals exert similar locomotory capacity (speed, distance) because the amount of energy available for the motion would be the same regardless of body mass (m). To test propriety of this theory, we examined body shape and take-off potential of two frog species, Rana nigromaculata (powerful jumpers) and Bombina orientalis (slow hoppers). Morphological measurements included thigh muscle mass (indicative of total muscle force), hindlimb length (L, determining acceleration distance), and interilial width (shaping take-off motion). To gauge locomotory capacity, take-off speed (v) and take-off angle ($\theta$) were measured from video analyses, and jump distance (R) and take-off Power ($P_{t}$ ) were calculated from equations $R=V^{2}sin2\theta/g$ and ($P_{t}$＝$㎷^{3}/2L$(where g is the gravitational constant). Scaling exponents of morphometric variables for both species were 0.96-1.11 for thigh muscle mass, 0.28-0.29 for hindlimb length, and 0.30-0.36 for interilial width. Scaling exponents of locomotory performance for the two species were -0.01-0.14 for take-off speed, 0.24-0.31 for jump distance, and 0.66-0.84 for take-off power. The results demonstrate that the frogs of this study showed isometric body shape within species, but that take-off response changed allometrically with body mass, indicating that these data did not fully support the previous proposition. An exception was found in take-off speed of B. orientalis, in which the speed changed little with body mass (slope＝-0.01). These findings suggest that the energy availability approach did not properly explain the apparent allometric relations of the take-off response in these animals and that an alternative model such as a power production approach may be worth addressing.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 추계학술발표회논문집(1)
• /
• pp.522-527
• /
• 1997

A total of 386 critical flow data points from 19 runs of 27 runs in the Marviken Test were selected and compared with the predictions by the correlations based on the critical flow scaling parameters. The results show that the critical mass flux in the very large diameter pipe can be also characterized by two scaling parameters such as discharge coefficient and dimensionless subcooling( $C_{d, ref}$ and $\Delta$ $T^{*}$$_{sub}$). The agreement between the measured data and the predictions are excellent.t.ons are excellent.t.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.47-53
• /
• 2015

PURPOSES: The scaling of a concrete surface caused by the combined effects of frost and de-icing salts is one of the main reasons for the need to repair transportation infrastructures in cold-climate regions. This study describes the results of attempts to determine the scaling resistance of concrete incorporating mineral admixtures such as fly ash, GGBFS, and silica fume, and subjected to the actions of frost and salt. METHODS : Conventionally, to evaluate the fundamental properties of concrete, flexural and compressive strength measurements are regularly performed. Based on the ASTM C 672 standard, concrete is subjected to 2%, 4%, and 8% $CaCl_2$ salt solutions along with repeated sets of 50 freeze/thaw cycles, and the scaling resistance was evaluated based on the mass of the scale and a visual examination. RESULTS : It was observed that silica fume is very effective in enhancing the scaling resistance of concrete. Meanwhile, concrete incorporating GGBFS exhibited poor resistance to scaling, especially in the first ten freeze/thaw cycles. However, fly ash concrete generally exhibited the maximum amount of damage as a result of the frost-salt attack, regardless of the concentrations of the solutions. CONCLUSIONS: It can be concluded that the scaling resistance of concrete is highly dependent on the type of the mineral admixture used in the concrete. Therefore, to provide a durable concrete pavement for use in cold-climate regions, the selection of a suitable binder is essential.