• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.298-301
• /
• 2005

Potato (Solamum tuberosum 'Dejima') plantlets were investigated on culture type and initial quantity of inoculation in bioreactor and survival rate by hydroponics for mass production. rode stems (1 to 1.5cm in length) of potato plantlets multiplied in vitro were grown for 3 weeks in liquid Murashige and Skoog (MS) medium with sucrose $30 g\; L^{-1}$. When plantlets (80-node inoculation) were raised in 10L balloon type bubble (BB) bioreactor, the healthiest growth of plantlets was obtained from explants cultured in ebb & flow culture with medium supplied periodically 12 times per day. The suitable inoculation quantity of 20L BB bioreactor was 120 pieces of stem segments (mean 2.2g fresh weight) in ebb & flow culture. Number of nodal shoot was eight on the average. In controlled culture room, survival rate of plantlets at 7 days after stem cutting was above $70\%$ when they were acclimatized by hydroponics grown in deep flow and solid medium culture. The highest survival rate of the stem cutting plantlets was in nutrient solution adjusted to EC $1.4dS{\cdot}m^{-1}$. Stem cutting plantlets through one culture could be obtained $670\~900$, when plantlets were grown in ebb & flow culture during 3 weeks using a 20L bioreactor with initial 120 pieces of nodal segments. 11 is possible In do mass production of seedlings cultured in bioreactor and hydroponics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.10
• /
• pp.1341-1350
• /
• 2007

This study was designed to ultimately develop a highly efficient mass production technology of bacterial cellulose isolated from the citrus gel fermented by G. hansenii TL-2C. Pilot equipment made with FRP vessel length (665 mm) ${\times}$ width (375 mm) ${\times}$ height (210 mm) was developed for mass production of the citrus gel. To develop the optimal conditions for mass production of citrus gel, comprised of citrus juice (6,000 mL) diluted 100 times, containing 5% seed bacteria, 10% sucrose, and 1% ethanol, citrus juice was fermented at $30^{\circ}C$ for 14 days, and gel productivity in pilot system was examined. BC was isolated and purified from the citrus gel, and their chemical composition and physicochemical properties were investigated.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.1
• /
• pp.12-19
• /
• 2005

This study investigated the productivity and growth of copepods, Sinocalanus tenellus 2 strains, Paracyclopina nana 3 strains, Apocyclops royi 2 strains, Tachidius triangularis 1 strain and Tigriopus sp. 1 strain at different temperatures $(24,\;28\;and\;32^{\circ}C)$ under 15 psu and various salinities (10, 20, 30 psu) at $28^{\circ}C$ for an individual culture. And the mass culture was carried out to evaluate the production of these copepods in the 500 mL vessel. For an individual culture of copepod, survival period of a brood female tended to increase with the decrease of temperature, but was not significantly influenced by salinity. With an increase of temperature and a decrease of salinity, maturation period of nauplii in all species tended to decrease. Total nauglii production from a broodo female at $24^{\circ}C$ was higoher than that from a brood .female at either 28 or $32^{\circ}C$ for S. tenellus and at $32^{\circ}C$ than either 24 or $32^{\circ}C$ for A. royi Haenam stram, but was not influenced by temperature for another copepods. And total nauplii production from a brood female at 10 and 20 psu tended to be higher than that from a brood female at 30 psu, expect for Tigriopus sp. and P. nana Hwajinpo strain. Total nauplii production from a brood female was the highest in Tigriopus sp. (350 nauplii) at $28^{\circ}C$ under 20 psu, followed by A. royi Haenam strain (187 nauplii) at $32^{\circ}C$ under 15 psu and P. nana Hwajinpo strain (152 nauplii) at $24^{\circ}C$ under 10 psu. In the mass culture of each copepod, P. nana was the most productive (26.6 mg dry weight) and this value was two and four times higher than productivity of Tigriopus sp. and A. royi, respectively.

• Journal of the Korea Society for Simulation
• /
• v.21 no.1
• /
• pp.69-79
• /
• 2012

One of the goals of mass customization is to permit changes in the product to meet specific customer requirements without substantially impacting the cost or delivery schedule. In large assembly manufacturing industries, such as shipbuilding and commercial airplane production, customization takes place by changing components and/or modules, sometimes called interim products. Using shipbuilding as a case study, it is possible to study the impact of such changes using mass customization principles on the schedule. In large assembly manufacturing, mass customization changes would cause changes in engineering time and production time, based on the amount of change required by the customization. This work first proposes a structure for implementing mass customization in shipbuilding and then uses simulation of a simplified, theoretical shipbuilding process to evaluate the impacts of various levels of change on delivery performance.

• Animal cells and systems
• /
• v.3 no.1
• /
• pp.29-39
• /
• 1999

Current data on reproductive characters of endemic and native species are essential to provide a strategy for the conservation of these species. Red pine (Pinus densiflora Sieb. & Zucc.) is one of the dominant, native tree species in Korea, but its reproductive ecology is not well-known. In 1997, the pattern of variation in cone and seed yields contributing to the conservation of declining populations of red pines was examined. Plant height and dbh were measured, and several new cones were collected from each tagged tree after counting the number of cones on each tree. For a subset of cones sampled, the number of fertile scales, the number of seeds at three development stages (early/late aborted, and filled seed), seed wing size, wing color, and individual filled seed mass were measured. The three sites which differed significantly in mean plant size also differed in mean cone and seed production per plant. However further analyses showed that most variation in characters examined occurred among plants within sites, but not among sites. An average of 90% of the potential seeds on the cones aborted at an early developmental stage, demonstrating that early abortion is a major factor affecting the number of filled seeds per cone. Individual seed mass was the only character which exhibited significant variations among sites as well as among trees within sites. Individual seed mass was overall negatively correlated with both the percentage of late abortion and the number of old cones per plant, suggesting that both the past and current years' reproductive activities have caused variations in seed mass. The potential dispersal distance of red pine seeds is quite large. However, wing loading was correlated with seed mass and number in a complex pattern across the sites. Distribution of seeds with varied colored wings differed among sites and among trees within sites. These results suggest that red pines at different sites might possess different strategies to cope with selection pressures acting during the final phase of reproduction, from seed dispersal to establishment. Then the ‘fitted’ red pine trees at each site should be identified and managed to conserve or restore populations.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.126-131
• /
• 2004

The popularity of flat-panel display(FPD), including plasma display panel(PDP) and liquid-crystal display(LCD), has given rise to the need to streamline their production. In these days, PDP is one of the most popular display devices because of its expansion of manufacturing process and simplicity. Bus electrodes, sustain electrodes, barrier ribs and RGB phosphors are patterned on PDP panel to display an image. Since a minute damage on the pattern can cause a serious defect to display, it is important to inspect the pattern precisely. In this paper, an automatic inspection system of repeated pattern in PDP panel has been introduced to find the defect, such as open, short, dirt, island, and so on. And the inspection system has been operated in the mass production line of PDP.

• Journal of the Korean Professional Engineers Association
• /
• v.10 no.3
• /
• pp.17-26
• /
• 1977

In order to obtain the most practical and economically efficient method for refining of kenaf fiber and the production possibility of bag dproucts by using kenaf, Various chemicals and conditions of treatment for refining of kenaf bark were examined. Refining by the retting method was found much beneficial in quality of fiber and in processing cost than the chemical mettled. Bag products by using kenaf bark has good quality , and for practical use, Even if the production cost is slightly more expensive than jute bag, it could be reduced by planned mass production.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.36-36
• /
• 2004

현재의 제조업들은 극도로 심화된 기업 간의 경쟁과 고객 요구사항의 급변으로 인해 신속한 제품 개발 및 효율적 제조를 요구받고 있다. 생산시스템은 대량생산방식(mass Production)에서 적시/적량 생산방식(lean production)으로 발전해왔고, 최소의 리드타임(lead time)을 갖는 민첩한 생산시스템으로의 발전이 요구되고 있으며, 근래에 새롭게 대두되고 있는 생산 패러다임인 e-Manufacturing에서는 확장된 기업체계 하에서 협업적 제품 개발과 신속 제조(collaborative product development and rapid production)의 달성을 지향하고 있다.(중략)

• Journal of the Korea Safety Management & Science
• /
• v.2 no.2
• /
• pp.139-153
• /
• 2000

To develope a domestic machinery industry, international competition through reducing cost by increasing productivity is as important as evolving technology and increasing quality. In this study, we have studied in application of GT technology. GT is a skill that acquires high productivity using part's resemblance for multi part and small size production like mass production. We have classified group, such as design, layout and the others, to be applied systematically. The design group includes retrieval for drawings and study for GT design. The layout group includes GT layout, analysis of production process and study for composition method. And others include scheduling, standardization and standard process.

• Journal of Distribution Science
• /
• v.11 no.4
• /
• pp.61-72
• /
• 2013

Purpose - It is widely accepted that the process of developing marketing strategy is composed of three steps: market segmentation, target market selection and positioning. However, mass marketing strategy based on cost reduction through economies of scale and standardized products, can be also an effective strategic option. Many marketing scholars including Theodore Levitt emphasize the importance of applying the mass production concept to various industries including service industries. Especially, in times of economic downturn, the capability of providing consumers with low-priced, value products can be an important source of competitive advantage, as well as the ability of providing high-priced premium products. Marketers should decide whether they will implement mass marketing strategy or target marketing strategy. The present study theoretically shows that firms should understand the target customers' price elasticity as well as the firm's cost structure in order to make such a strategic decision. Research design, data, and methodology - Instead of implementing an empirical study, this study provides a theoretical(mathematical) investigation on the effect of consumers' price elasticity on a firm's optimal price level, profit, sales volume, revenue, and cost. The results are mostly deduced from derivative calculations and several graphs are utilized to represent the results on the relationships between the variables under study. Results - The analytical results suggest that it is more profitable for a firm to adopt the segment/target marketing strategy (more specifically the differentiation strategy) when the degree of consumers' heterogeneity is high and the proportion of the fixed cost in the total cost is low. On the other hand, if the degree of consumers' heterogeneity is low and the fixed cost is high, it is better to adopt the mass marketing strategy or the cost leadership strategy. The strategy of concentrating on a single target market will be effective when consumers' needs are highly heterogeneous but the fixed cost is high. Any of the three types of generic strategies proposed my Porter(1980, 1985) can be applied when both the consumers' heterogeneity and the fixed cost are low. This study also proposes the contribution-margin-based method for developing the optimal pricing strategy. Conclusions - One of the primary roles of marketers is to find a proper compromise between the two conflicting goals of maximizing customer satisfaction and minimizing cost. In order to do so, he or she should understand the characteristics of the target customers as well as the cost structure of the firm. In addition to the theoretical analyses, this study discusses several business cases and explains how superior companies find the optimal compromise position between these two goals and dominate the market. One of the radical changes recently taking place in business arena is the reduction of production and distribution costs of both physical goods and information due to the advancement and the wide diffusion of information technology. The cost reduction combined with lowered priced elasticity incurred by customized products and services, will enable many firms to adopt the mass customization strategy.