• 대한임베디드공학회논문지
• /
• 제2권1호
• /
• pp.1-8
• /
• 2007

In this paper, we developed a file system architecture for portable multimedia devices. To enhance user convenience, the information about the stored files should be easily retrieved and organized. We defined NMD (Networked MetaData), which can organize the files in networked fashion by attaching user-defined attributes and relation between files. The NMD is stored in flash memory to utilize its nonvolatile property and low-power consumption, while multimedia files are stored in hard disk, an inexpensive mass storage. The experimental implementation showed that this architecture was able to save about 10% power compared to the hard disk NMD-store.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.291-298
• /
• 2005

This paper describes the characteristic feather of propulsion system adopting mass production. The train formation is composed of 4 cars by 2 Motor cars and 2 Train cars. Acceleration rate must be 3.0 km/h/s or more when the car starts up to 35km/h by 16ton of passenger load. The system information supervision is easy because the system is controlled to perfect digital circuits, all information of an action is stored in a memory and is managed. The control system is composed of a fully digital circuit and a high level software such as C language. The DSP TMS320C31 is used for main processor and has the capability of 50MHz, 32bit floating point operation and has a C compiler. Therefore, the implementation of control algorithm and the change of function are easy. VVVF inverter using IGBT conducted variable combined test, environment test using chamber, interface test and field test etc.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 춘계학술대회
• /
• pp.145-149
• /
• 2006

As the minimum feature size decreases, it is more difficult to control critical contaminant particles. For 16GB flash memory introduced by Samsung a few months ago, 50nm process was used and in this case, contaminant particles as small as 25nm should be control led. The particle beam mass spectrometer (PBMS) was developed to directly sample particles at pressures down to 100 mtorr. This instrument is sensitive to small particles (>5nm) produced in low concentrations ($>20cm^{-3}$). The PBMS has proved to be effect ive in measuring particles generated during semi-conductor fabrication processes, such as low-pressure chemical vapor deposition (LPCVD) of thin films. The operating principle of the PBMS and some measurement results are reviewed in this paper.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.222-227
• /
• 2001

The time simulation of slow drift motions of moored FPSO in waves is presented. The equation of motion based on Cummin's theory of impulse responses are employed, and are consisted of horizonal plane -surge, sway and yaw. The added mass coefficients, wave damping coefficients, first order wave exciting forces and the second order wave drift forces involved in the equations are obtained from a three-dimensional panel method in the frequency domain. The mooring lines are modeled quasistatically as catenary for chains and touchdown. As for numerical example, time domain analyses are carried out for a box-type FPSO in long crest irregular wave condition.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.103-107
• /
• 2001

When ship claps against the ocean structure sited at shallow water, the time simulation of motion responses of dolphin-moored ocean structure is presented. The equatien of motion based on Cummin's theory of impulse responses are employed, and solved in time domain by using the Newmark $\beta$ method. The added mass and damping coefficients involved in the equations are obtained from a three-dimensional panel method in the frequency domain. The impact forces due to ship collision are modeled as two method, and those are elastic and non-elastic collisions. The mooring forces for dolphin systems of scean structure are considered as linear spring system.

• 항공우주산업기술동향
• /
• 제9권1호
• /
• pp.90-101
• /
• 2011

본고에서는, 지구관측 위성용 탑재체자료처리장치의 주요기술과 국내외 기술 개발동향과 국내 기술의 현 주소를 살피고, 독자적인 기술개발의 필요성 및 개발 방향을 점검한다.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.26-30
• /
• 2001

Up to now, Most studies of hydroelasticity are about frequency domain analysis. Those aren't suited for analysis of the landing take-off, and dropping of aircraft on a structure. So, the concern of this paper is the transient behavior of a VLFS subjected to dynamic load, induced by airplane landing and take-off. To predict the added mass, damping coefficient, and wave exciting force, the source-dipole distribution method was used in the frequency domain. The responses are accomplished by using the FEM scheme. A time domain analysis method is based on the Newmark β method to pursue the time step procedure, taking advantage of memory effect function for hydrodynamic effects.

• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.169-173
• /
• 2009

We studied driving characteristics according to the ratio of mass and charging (m/q) value for charged toner particles with black and yellow color in charged particle type display panel. After biasing rectangle pulse to the transparency electrodes of putted panel with toner particles, its response time and contrast ratio are simultaneously measured using a laser as a optical source, photodiode as a detector and reflective system. As a results, contrast ratio is largest at the shortest response time region which is different to the particle because of m/q. We proposed relational equation for response time, m/q, cell gap and biasing voltage. It has not been studied and reported to analyze the relationship of response time, biasing voltage, lumping phenomena, cell gap, and contrast ratio for toner particle type display.

• 산업경영시스템학회지
• /
• 제26권3호
• /
• pp.67-73
• /
• 2003

Manufacturing technologies of compound semiconductor are similar to the process of memory device, but management technology of manufacturing process for compound semiconductor is not enough developed. Semiconductor manufacturing environment also has been emerged as mass customization and open foundry service so integrated manufacturing system is needed. In this study we design the integrated manufacturing system for compound semiconductor fabrication t hat has monitoring of process, reduction of lead-time, obedience of due-dates and so on. This study presents integrated manufacturing system having database system that based on web and data acquisition system. And we will implement them in the actual compound semiconductor fabrication.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.492-494
• /
• 2012

저궤도 위성은 위성과 지상과의 통신시간이 제한되어 있으므로 제한된 시간에 위성의 대용량메모리(Mass Memory)에 저장된 데이터를 전송받아야 하는데, 이를 위해 저장되는 데이터 량을 정확히 예측할 수 있어야 하고, 저장된 데이터 량에 따라 지상으로 전송하는데 소요되는 시간을 예측할 수 있어야 한다. 본 논문은 위성에 저장되고 있는 Telemetry 종류에 따라 대용량메모리에 저장되는 데이터 량을 예측하고, 저장된 데이터 량에 따라 지상으로 전송하는데 소요되는 시간을 계산하기 위해 개발된 플레이백 시간 예측 프로그램에 대해 서술한 것이다.