• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.37-44
• /
• 2020

In improving laser cutting of optical plastic films for mass production of optoelectronics display units, it is important to understand particle contamination over optical film surface due to fume particle generation and dispersion. This numerical study investigates the effects of downward and upward air flow motions on fume particle dispersion around laser cut line. The simulations employ random particle sampling of up to one million fume particles by probabilistic distributions of particle size, ejection velocity and angle, and fume particle dispersion and surface landing are predicted using Basset-Boussinesq-Oseen model of low Reynolds number flows. The numerical results show that downward air flow scatters fume particles of a certain size range farther away from laser cut line and aggravate surface contamination. However, upward air flow pushes fume particles of this size range back toward laser cut line or sucks them up with rising air motion, thus significantly alleviating surface contamination.

• Mass Spectrometry Letters
• /
• 제3권1호
• /
• pp.25-28
• /
• 2012

Paint Spray is developed as a direct sampling ionisation method for mass spectrometric analysis of additives in polymer-based surface coatings. The technique simply involves applying an external high voltage (5 kV) to the wetted sample placed in front of the mass spectrometer inlet and represents a much simpler ionisation technique compared to those currently available. The capabilities of Paint Spray are demonstrated herein with the detection of four commercially available hindered amine light stabilisers; TINUVIN${(R)}$770, TINUVIN${(R)}$292, TINUVIN${(R)}$123 and TINUVIN${(R)}$152 directly from thermoset polyester-based coil coatings. Paint Spray requires no sample preparation or pre-treatment and combined with its simplicity requiring no specialised equipment makes it ideal for use by non-specialists. The application of Paint Spray for industrial use has significant potential as sample collection from a coil coating production line and Paint Spray ionisation could enable fast quality control screening at high sensitivity.

• 대한조선학회지
• /
• 제13권4호
• /
• pp.1-10
• /
• 1976

It is a well-known phenomenon that, in the case of vibrations of an elastic body in a fluid such as water, the presence of the surrounding fluid has the effect of lowering the natural frequencies of the vibration as compared with those in air or vacuum on account of the increased inertia, i.e. added mass. In this report, defining the mass increase factor as the ratio of added mass to vibration mass of the body in air, the author investigated the mass increased factor of an elastic plate vibrating in the fluid. It is assumed that the edges of the plate are simply supported, and that the surrounding fluid is an infinite ideal one. For the problem formulation the elliptical cylindrical coordinate system is adopted, so that a rectangular plate may be represented by a sheet degenerated from an elliptical cylinder. By virtue of the coordinate system adopted, plates which are chordwisely finite and lengthwisely contineous could directly be treated, but plates which are chordwisely finite in both directions could not be treated directly. For the latter, hence, plates which are chordwisely finite and lengthwisely semi-finite are investigated as an appropriate approximation. Some examples of the mass increase factor are numerically calculated for the fundamental mode and modes of zero or one nodal line in each direction with the range of the aspect ratio from 1 to 10 or more.

• 대한토목학회논문집
• /
• 제28권5B호
• /
• pp.475-483
• /
• 2008

사고 등으로 인해 하천에 순간적으로 주입되는 오염물질의 2차원 이송-확산을 모의하기 위하여 SUPG법에 의한 2차원 유한요소 모형을 개발하고 주입된 질량과 모의 질량간의 오차를 산정하였다. 지배방정식으로부터 질량 오차 산정식을 유도하고 이를 간단한 예제에 적용하였다. 적용 예제로는 단순 직선수로에서 선원을 통한 질량주입과 일방향의 등질 유속장을 가지는 2차원 공간에서 점원을 통한 질량주입 문제를 가정하였으며, 기존의 Galerkin법과의 비교를 위하여 두가지 수치기법에 대한 모의 검증을 실시하였다. 검증결과 기존의 Galerkin법에 의한 모의 결과에 비하여 SUPG법을 통한 수치모형의 구성이 모의의 정확성뿐만 아니라 주입 질량의 보존에 있어서도 보다 정확한 방법임을 확인하였다.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.36-36
• /
• 2003

In the present study, growth performances of the offspring from selected brood line were compared to those of the offspring from non-selected brood line of red sea bream. Offspring groups were mass produced separately from two brood lines, selected and non-selected Korean strain. Selected brood line have been selected by fish size for four generations (upper 5∼30% per generation) and non-selected brood line is the second generation of wild population at south sea in Korea. There's no significant difference in body length between offspring from selected and non-selected brood line during early growing stage (until 96-days old). However, offspring from selected brood line had superior body weight growth than offspring from non-selected brood line. At sea cages rearing trials with communal stocking, Offspring from selected brood line showed significantly better performance in body weight, body length, weight gain, specific growth rate and feed consumption (but not in feed conversion ratio) than offspring from non-selected brood line. At 24 months old, offspring from selected brood line grew faster 1.10 times in body length and 1.41 times in body weight than offspring from non selected brood line. The response to selection when compared to a non-selected line is on average of 10% in weight per generation at 24 months old.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.299-307
• /
• 2016

This study aims to investigate effects of the length of the buoy and sand bag line on the loss of webfoot octopus pot. A numerical modeling and simulation was carried out to analyze the process that the pot gear affected by wave using the mass spring model. Through the simulation, tensions of sand bag line under various condition were investigated by length of buoy and sand bag line. The drag force and coefficient k of an artificial shell used in the webfoot octopus pot was obtained from an experiment in a circular water channel, and the coefficient k was applied to the simulation. To verify the accuracy of the simulation model, a simple test was conducted into measuring a rope tension of a hanging shell under flow. Then, the test result was compared with the simulation. The lengths of the buoy line in the simulation were 1.12, 1.41, 1.80, 2.23, 2.69, and 3.17 times of water depth. The lengths of sand bag line were 10, 20, 30, and 40 meters, and conditions of water depth were 8, 15, 22 meters. 4 meter height and 8 second period of wave were applied to all simulations. As a results, the tension of the sand bag line was decreased as the buoy and sand bag line were increased. The minimum tension of the sand bag line was appeared in conditions that the length of the buoy line is twice of water depth and the sand bag line length is over 40 meters (except in case of depth 8 meters.).

• 소음진동
• /
• 제6권2호
• /
• pp.163-177
• /
• 1996

An investigation on thermohydraulic stability of flow oscillations in the CANada Deuterium Uranium-600(CANDU-6) heat transport system has been conducted. Flow oscillations in reactor coolant loops, comprising two heat sources and two heat sinks in series, are possibly caused by the response of the pressure to extraction of fluid in two-phase region. This response consists of two contributions, one arising from mass and another from enthalpy change in the two-phase region. The system computer code used in the investigation os SOPHT, which is capable of simulating steady states as well as transients with varying boundary conditions. The model was derived by linearizing and solving one-dimensional, homogeneous single- and two-phase flow conservation equations. The mass, energy and momentum equations with boundary conditions are set up throughout the system in matrix form based on a node-link structure. Loop stability was studied under full power conditions with interconnecting the two compressible two phase regions in the figure-of-eight circuit. The dominant function of the interconnecting pipe is the transfer of mass between the two-phase regions. Parametric survey of loop stability characteristics, i. e., damping ratio and period, has been made as a function of geometrical parameters of the interconnection line such as diameter, length, height and orifice flow coefficient. The stability characteristics with interconnection line has been clarified to provide a simple criterion to be used as a guide in scaling of the pipe.

• 한국터널지하공간학회 논문집
• /
• 제6권2호
• /
• pp.101-111
• /
• 2004

터널의 안정성 확보 및 최적설계를 위해서, 충분한 지반조사 데이터를 확보하는 것이 가장 중요하나, 공간상에 분포하는 자료측정의 제한성 및 경제적인 이유로 그렇게 하지 못하는 것이 현실이다. 특히, 터널은 민원 및 산악지형 등의 이유로 노선의 본선부에서 시추가 불가능한 구간이 발생하고, 각종 물리탐사 자료만으로는 정량적인 암반등급 산정이 어렵다. 따라서, 본 연구에서는 이러한 문제점을 극복하기 위하여 본선에서 이격된 물리탐사 자료 및 시추데이터를 최대한 활용해 지구통계학 기법의 하나인 2차원 다분적 지시크리깅을 확장한 3차원 다분적 지시크리깅 (3D multiple indicator kriging, 3D-MI kriging)기법을 제안하였다. 또한 제안된 3차원 다분적 지시크리깅기법을 경부고속철도 제 ${\bigcirc}-{\bigcirc}$공구 터널설계 시 RMR분류에 의한 암반등급 산정을 위해 적용하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.650-650
• /
• 2013

Although imprinted nanopatterns of organic polymer can be modified by the heat treatment [1], it generally requires high process temperatures and is material-dependent since the heat-induced mass loss of the organic polymer is greatly affected by its chemical characteristics. When oxygen is added during the annealing process, one can reduce the process temperature as well as the dependence of the materials. With the oxygen, line width reduction of a polymer (SU-8) patterns could be accomplished at temperature of as low as $250^{\circ}C$ which was not possible in the heat only process. This oxidative line width reduction can be dramatically promoted with the introduction of oxygen plasma. The oxygen plasma, with its highly-reactive oxygen species, vigorously etches away the organic materials, proven to be extremely effective line with reduction method. It is, however, very hard to control the extent and homogeneity of the etching, particularly of very fine patterns. Here, we report an effective and reliable line width reduction method of imprinted nanopatterns by combined plasma and heat treatment. The merits of this process include the reduction of process temperature, time and material-dependence.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.327-331
• /
• 2008

An in-line wet etch/cleaning system was established for the research and development in wet etch process as a formation of electrode such as metal or transparent conductive oxide layer. A reverse moving system was equipped in the in-line wet etch/cleaning system for the alternating motion of glass substrate in a wet etch bath of the system. Therefore, it was possible for the glass substrate to be moved back and forth and it was possible to reduce the size of the system by using the reversing moving system. For the effect of the alternating motion of substrate on the etch rate in the in-line wet etch bath, indium tin oxide(ITO) patterns were obtained through wet etch process in the in-line system in which the substrate was moved back and forth. From the CD(critical dimension) skews resulted from the ADI CD and ACI CD of the ITO patterns, it was concluded that the alternating motion of glass substrate are possible to be applied to the mass production of wet etch process.