• Journal of the Korean Society of Combustion
• /
• v.7 no.4
• /
• pp.10-20
• /
• 2002

This paper discusses effect of solid mass inventory on the hydrodynamic characteristics of circulating fluidized bed(CFB). Operating parameters of solid mass inventory and air flow rates were varied to understand their effects on fludization pattern. Experimental measurements were made in a CFB of which height and diameter are 3m and 0.05m respectively. Black SiC particles ranging from $100{\mu}m\;to\;500{\mu}m$ were employed as the bed material. Superficial gas velocity of riser and J-valve fluidizing velocity were in the ranges of $1.39{\sim}3.24m/s\;and\;0.139{\sim}0.232m/s$, respectively. The axial solid fraction and solid circulation rate of CFB were calculated based on the experimental data and compared with modellings through IEA-CFBC Model and commercial CFD code.

• 한국연소학회:학술대회논문집
• /
• 2002.11a
• /
• pp.165-172
• /
• 2002

This paper discusses hydrodynamic characteristics of cold circulating fluidized bed(CFB) in different solid mass inventories. Operating parameters of solid mass inventory, primary air and J-valve fluidizing air were varied to find out the effect on the flow fludization pattern. Experimental measurements were made in a 3m tall CFB that has 0.05m riser diameter and black silica-carbonate of particle sizes from $100{\mu}m$ to $500{\mu}m$ were employed as the bed material. The operating conditions of superficial gas velocity and J-valve fluidizing velocity were in the ranges of 1.39~3.24 m/s and 0.139~0.232 m/s respectively. The axial solid fraction and solid circulation rate of CFB were observed and compared with modelling through IEA-CFBC Model and commercial CFD code.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.139-142
• /
• 2000

Excessive inventories result from poor scheduling, planning, and controls, and the converse is also same. With adequate inventories, supplies can transport products to customers in time without excessive delivering cost. So efficient inventory control is vital for successful logistics management operation. In terms of mass discount retailers such as Wal-Mart, Carrefour, E-Mart, and so on, they require the high-quality services such as a small-amount and a high-frequency delivery because of having small warehouse and wanting possess much more various goods. In the opposite, manufactures ask mass discount retailer to delivery more lots of goods because of reducing the number of deliveries. It goes without saying that both wish to prevent stockout(lack of inventories). Usually, mass discount retailers have the power more than manufactures. This paper proposed how to manage inventory and how many to order in view of the TPLC and supplier. We considered the economic order quantity models for multiple items so as to prevent urgent deliveries as possible as. And the tradeoff stockout costs and delivering costs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.8 no.2
• /
• pp.11-17
• /
• 1984

The purpose of this study was to explore the characteristics of Fashion leadership in relation to social partipation, mass communication, and socioeconomic level among married women living in Seoul. Fashion opinion leadership was measured by Schrank Fashion Opinion Leadership Inventory. Fashion Preference Scale was designed to determinefashion innovativeness. Social parti-cipationana mass communication were assessed by selected items from the inventory of Summer and Kim. Hollingshead's two-factor index and weighting system was selected to assess socioeconomic level. The questionnaires were adminstered to a random sample of married women in Seoul. The date for 214 respondents were analyzed by Pearson correlation, analysis of variance, and t-teat. The results were as followers : 1) Fashion opinion leadership was significantly related to fashion preference. 2) Fashion leadership was significantly related to social participation, mass communication, socioeconomic level. 3) There was a significant difference between fashion leadership and age. 4) Women's occupation had little influence on fashion opinion leadership as well as fashion preference.

• Journal of Korean Academy of Nursing
• /
• v.35 no.6
• /
• pp.1183-1189
• /
• 2005

Objectives : This descriptive study was conducted to examine the degree of stress, coping styles, communication with the mother and depression between headache-suffering children and headache-free children and to explore predicted factors for headache occurrence in children. Method : The subjects of this study consisted of 196 headache-free children and 107 headache-suffering children. They were 4th-6th graders of an elementary school in T city. The instruments in this study were David's stressor of children, Lazarus & Folkman's Stress Coping Style, PACI(Parent-Adolescent Communication Inventory) by Barnes & Olsen and Kovac's CDI (Children's depression inventory). Data were collected from May 2 to July 16, 2004. Results : Total stress(t=-3.76, p=.035), school stress(t=-3.02, p=.001), mass media stress(t=-1.39, p=.029) and depression(t=7.62, p=.001) in headache-suffering children were significantly higher than those of headache-free children. Problem-oriented coping skills (t=1.23, p=.023), and the score of communication with the mother(t=2.32, p=.012) in headache-suffering children were lower than those of headache-free children. Logistic regression analysis (stepwise) showed that the most powerful predictor was stressors in school, followed by depression, stressors in mass media and communication with the mother. Conclusions: This study revealed that important factors such as the degree of school stress, depression, the degree of mass media stress, communication with the mother and problem-oriented coping skills should be controlled for reducing of headaches in children.

• Nuclear Engineering and Technology
• /
• v.33 no.6
• /
• pp.638-651
• /
• 2001

The present study is to assess the applicability of the best-estimate thermal-hydraulic code, MARS 1.4, for the analysis of thermal-hydraulic behavior in PWRs during natural circulation conditions. The code simulates a natural circulation test, BETHSY test 4. la, which was conducted on the integral test facility of BETHSY. The test represented the cooling states of the primary cooling system under single-phase natural circulation, two-phase natural circulation and the reflux condensation mode with conditions corresponding to the residual power, 2% of the rated core power value and 6.8 MPa at the secondary system. Based on MARS 1.4 calculations, the major thermal-hydraulic behaviors during natural circulation are evaluated and the differences between the experimental data and calculated results are identified. The calculated results show generally good behavior with regard to the experimental results; the region of single-phase natural circulation is 100-92% of the initial mass inventory, two-phase natural circulation is 84-63 %, and the reflux condensation mode occurred below 58 %. U-tubes empty and the core uncovery are obtained at 39 % and 34 % of the initial mass inventory, respectively.

• Mass Spectrometry Letters
• /
• v.13 no.4
• /
• pp.95-105
• /
• 2022

Amatoxin-induced mushroom poisoning starts with nonspecific symptoms of toxicity but hepatic damage may follow, resulting in the rapid development of liver insufficiency and, ultimately, coma and death. Accurate detection of amatoxins, such as α-, β-, and γ-amanitin, within the first few hours after presentation is necessary to improve the therapeutic outcomes of patients. Therefore, analytical methods for the identification and quantification of α-, β-, and γ-amanitin in biological samples are necessary for clinical and forensic toxicology. This study presents a literature review of the analytical techniques available for amatoxin detection in biological matrices, and established an inventory of liquid chromatography (LC) techniques with mass spectrometry (MS), ultraviolet (UV) detection, and electrochemical detection (ECD). LC-MS methods using quadrupole tandem mass spectrometry, time-of-flight mass spectrometry, and orbitrap MS are powerful analytical techniques for the identification and determination of amatoxins in plasma, urine, serum, and tissue samples, with high sensitivity, specificity, and reproducibility compared to LC with UV and ECD, enzyme-linked immunoassay, and capillary electrophoresis methods.

• Nuclear Engineering and Technology
• /
• v.30 no.5
• /
• pp.424-434
• /
• 1998

RELAP5/Mod3.1 code was assessed with the semiscale experiment S-NC-3, and S-NC-4, which simulated the two-phase natural circulation and reflux condensation for the SBLOCA of PWR, respectively . Test S-NC-3 and S-NC-4 calculation results showed that RELAP5/Mod3.1 quite well describes the influence of steam generator secondary side heat transfer degradation on both two-phase natural circulation and reflux condensation. A comparison between the calculated and measured two-phase mass flow rate in test S-NC-3 shows good agreement for primary mass inventory more than 92%. And RELAP5/Mod3.1 have a good mass flow rate prediction capability for the transient such as S-NC-4 except some flow oscillations. The reflux flow rate for S-NC-4 test is under predicted, and the overall results verify that the correct prediction of the reduced liquid level appears to be required for the correct calculation of the overall phenomena.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.161-170
• /
• 2019

Multi-product mass production small and medium enterprise factories have a wide variety of products and a large number of products, wasting manpower and expenses for inventory management. In addition, there is no way to check the status of inventory in real time, and it is suffering economic damage due to excess inventory and shortage of stock. There are many ways to build a real-time data collection environment, but most of them are difficult to afford for small and medium-sized companies. Therefore, smart factories of small and medium enterprises are faced with difficult reality and it is hard to find appropriate countermeasures. In this paper, we implemented the contents of extension of existing inventory management method through character extraction on label with barcode and QR code, which are widely adopted as current product management technology, and evaluated the effect. Technically, through preprocessing using OpenCV for automatic recognition and classification of stock labels and barcodes, which is a method for managing input and output of existing products through computer image processing, and OCR (Optical Character Recognition) function of Google vision API. And it is designed to recognize the barcode through Zbar. We propose a method to manage inventory by real-time image recognition through Raspberry Pi without using expensive equipment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.197-207
• /
• 2018

SMEs manufacturing Factory, which are small-scale production systems of various types, mass-produce and sell products in order to meet customer needs. This means that the company has an excessive amount of material supply to reduce the loss due to lack of inventory and high inventory maintenance cost. And the products that fail to respond to the demand are piled up in the management warehouse, which is the reality that the storage cost is incurred. To overcome this problem, this paper uses ARIMA model, a time series analysis technique, to predict demand in terms of seasonal factors. In this way, demand forecasting model based on economic order quantity model was developed to prevent stock shortage risk. Simulation is carried out to evaluate the effectiveness of the development model and to demonstrate the effectiveness of the development model as applied to SMEs in the future.