• 한국연소학회지
• /
• 제7권4호
• /
• pp.10-20
• /
• 2002

This paper discusses effect of solid mass inventory on the hydrodynamic characteristics of circulating fluidized bed(CFB). Operating parameters of solid mass inventory and air flow rates were varied to understand their effects on fludization pattern. Experimental measurements were made in a CFB of which height and diameter are 3m and 0.05m respectively. Black SiC particles ranging from $100{\mu}m\;to\;500{\mu}m$ were employed as the bed material. Superficial gas velocity of riser and J-valve fluidizing velocity were in the ranges of $1.39{\sim}3.24m/s\;and\;0.139{\sim}0.232m/s$, respectively. The axial solid fraction and solid circulation rate of CFB were calculated based on the experimental data and compared with modellings through IEA-CFBC Model and commercial CFD code.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.165-172
• /
• 2002

This paper discusses hydrodynamic characteristics of cold circulating fluidized bed(CFB) in different solid mass inventories. Operating parameters of solid mass inventory, primary air and J-valve fluidizing air were varied to find out the effect on the flow fludization pattern. Experimental measurements were made in a 3m tall CFB that has 0.05m riser diameter and black silica-carbonate of particle sizes from $100{\mu}m$ to $500{\mu}m$ were employed as the bed material. The operating conditions of superficial gas velocity and J-valve fluidizing velocity were in the ranges of 1.39~3.24 m/s and 0.139~0.232 m/s respectively. The axial solid fraction and solid circulation rate of CFB were observed and compared with modelling through IEA-CFBC Model and commercial CFD code.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.139-142
• /
• 2000

Excessive inventories result from poor scheduling, planning, and controls, and the converse is also same. With adequate inventories, supplies can transport products to customers in time without excessive delivering cost. So efficient inventory control is vital for successful logistics management operation. In terms of mass discount retailers such as Wal-Mart, Carrefour, E-Mart, and so on, they require the high-quality services such as a small-amount and a high-frequency delivery because of having small warehouse and wanting possess much more various goods. In the opposite, manufactures ask mass discount retailer to delivery more lots of goods because of reducing the number of deliveries. It goes without saying that both wish to prevent stockout(lack of inventories). Usually, mass discount retailers have the power more than manufactures. This paper proposed how to manage inventory and how many to order in view of the TPLC and supplier. We considered the economic order quantity models for multiple items so as to prevent urgent deliveries as possible as. And the tradeoff stockout costs and delivering costs.

• 한국의류학회지
• /
• 제8권2호
• /
• pp.11-17
• /
• 1984

The purpose of this study was to explore the characteristics of Fashion leadership in relation to social partipation, mass communication, and socioeconomic level among married women living in Seoul. Fashion opinion leadership was measured by Schrank Fashion Opinion Leadership Inventory. Fashion Preference Scale was designed to determinefashion innovativeness. Social parti-cipationana mass communication were assessed by selected items from the inventory of Summer and Kim. Hollingshead's two-factor index and weighting system was selected to assess socioeconomic level. The questionnaires were adminstered to a random sample of married women in Seoul. The date for 214 respondents were analyzed by Pearson correlation, analysis of variance, and t-teat. The results were as followers : 1) Fashion opinion leadership was significantly related to fashion preference. 2) Fashion leadership was significantly related to social participation, mass communication, socioeconomic level. 3) There was a significant difference between fashion leadership and age. 4) Women's occupation had little influence on fashion opinion leadership as well as fashion preference.

• 대한간호학회지
• /
• 제35권6호
• /
• pp.1183-1189
• /
• 2005

Objectives : This descriptive study was conducted to examine the degree of stress, coping styles, communication with the mother and depression between headache-suffering children and headache-free children and to explore predicted factors for headache occurrence in children. Method : The subjects of this study consisted of 196 headache-free children and 107 headache-suffering children. They were 4th-6th graders of an elementary school in T city. The instruments in this study were David's stressor of children, Lazarus & Folkman's Stress Coping Style, PACI(Parent-Adolescent Communication Inventory) by Barnes & Olsen and Kovac's CDI (Children's depression inventory). Data were collected from May 2 to July 16, 2004. Results : Total stress(t=-3.76, p=.035), school stress(t=-3.02, p=.001), mass media stress(t=-1.39, p=.029) and depression(t=7.62, p=.001) in headache-suffering children were significantly higher than those of headache-free children. Problem-oriented coping skills (t=1.23, p=.023), and the score of communication with the mother(t=2.32, p=.012) in headache-suffering children were lower than those of headache-free children. Logistic regression analysis (stepwise) showed that the most powerful predictor was stressors in school, followed by depression, stressors in mass media and communication with the mother. Conclusions: This study revealed that important factors such as the degree of school stress, depression, the degree of mass media stress, communication with the mother and problem-oriented coping skills should be controlled for reducing of headaches in children.

• Nuclear Engineering and Technology
• /
• 제33권6호
• /
• pp.638-651
• /
• 2001

The present study is to assess the applicability of the best-estimate thermal-hydraulic code, MARS 1.4, for the analysis of thermal-hydraulic behavior in PWRs during natural circulation conditions. The code simulates a natural circulation test, BETHSY test 4. la, which was conducted on the integral test facility of BETHSY. The test represented the cooling states of the primary cooling system under single-phase natural circulation, two-phase natural circulation and the reflux condensation mode with conditions corresponding to the residual power, 2% of the rated core power value and 6.8 MPa at the secondary system. Based on MARS 1.4 calculations, the major thermal-hydraulic behaviors during natural circulation are evaluated and the differences between the experimental data and calculated results are identified. The calculated results show generally good behavior with regard to the experimental results; the region of single-phase natural circulation is 100-92% of the initial mass inventory, two-phase natural circulation is 84-63 %, and the reflux condensation mode occurred below 58 %. U-tubes empty and the core uncovery are obtained at 39 % and 34 % of the initial mass inventory, respectively.

• Mass Spectrometry Letters
• /
• 제13권4호
• /
• pp.95-105
• /
• 2022

Amatoxin-induced mushroom poisoning starts with nonspecific symptoms of toxicity but hepatic damage may follow, resulting in the rapid development of liver insufficiency and, ultimately, coma and death. Accurate detection of amatoxins, such as α-, β-, and γ-amanitin, within the first few hours after presentation is necessary to improve the therapeutic outcomes of patients. Therefore, analytical methods for the identification and quantification of α-, β-, and γ-amanitin in biological samples are necessary for clinical and forensic toxicology. This study presents a literature review of the analytical techniques available for amatoxin detection in biological matrices, and established an inventory of liquid chromatography (LC) techniques with mass spectrometry (MS), ultraviolet (UV) detection, and electrochemical detection (ECD). LC-MS methods using quadrupole tandem mass spectrometry, time-of-flight mass spectrometry, and orbitrap MS are powerful analytical techniques for the identification and determination of amatoxins in plasma, urine, serum, and tissue samples, with high sensitivity, specificity, and reproducibility compared to LC with UV and ECD, enzyme-linked immunoassay, and capillary electrophoresis methods.

• Nuclear Engineering and Technology
• /
• 제30권5호
• /
• pp.424-434
• /
• 1998

RELAP5/Mod3.1 code was assessed with the semiscale experiment S-NC-3, and S-NC-4, which simulated the two-phase natural circulation and reflux condensation for the SBLOCA of PWR, respectively . Test S-NC-3 and S-NC-4 calculation results showed that RELAP5/Mod3.1 quite well describes the influence of steam generator secondary side heat transfer degradation on both two-phase natural circulation and reflux condensation. A comparison between the calculated and measured two-phase mass flow rate in test S-NC-3 shows good agreement for primary mass inventory more than 92%. And RELAP5/Mod3.1 have a good mass flow rate prediction capability for the transient such as S-NC-4 except some flow oscillations. The reflux flow rate for S-NC-4 test is under predicted, and the overall results verify that the correct prediction of the reduced liquid level appears to be required for the correct calculation of the overall phenomena.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.161-170
• /
• 2019

다품종 대량 생산 중소기업 공장에서는 제품의 종류가 다양하고 그 수량이 많기 때문에 재고의 관리를 위한 인력과 경비가 낭비되고 있다. 또한 재고의 현황을 실시간으로 확인 할 방법이 마련 되있지 않아서 재고의 과적재, 과부족 현상으로 인한 경제적 피해를 받고 있다. 실시간 데이터 수집 환경을 구축하기 위한 많은 방안이 있지만 대부분 구축비용과 시간이 중소 중견기업이 감당하기 어려운 수준이다. 그렇기 때문에 중소 중견기업의 스마트 공장은 구현되기 어려운 현실을 마주하고 있으며, 적절한 대책을 찾기 힘든 실정이다. 따라서 본 논문에서는 현재 생산품 관리 기술로 많이 채택되는 바코드, QR코드와 함께 라벨에 표기되어 있는 글자추출을 통해 기존 재고관리 방법의 확장에 대한 내용을 구현하고 그 효과를 평가하였다. 기술적으로는 컴퓨터 이미지 처리를 통해서 기존의 생산품의 입출고 관리를 위한 방법인 재고라벨 및 바코드에 대한 자동인식 및 분류를 하기 위한 OpenCV를 이용한 전처리, 구글 비젼 API의 OCR(Optical Character Recognition)기능을 통해서 글자를 추출하고, Zbar를 통해서 바코드를 인식할 수 있게 설계하였고, 값비싼 장비를 사용하지 않고 라즈베리파이를 통해 실시간 영상을 통한 인식으로 재고를 관리할 수 있는 방법을 제안한다.

• 한국인터넷방송통신학회논문지
• /
• 제18권2호
• /
• pp.197-207
• /
• 2018

다품종 소량생산체제인 중소기업 제조공장은 고객의 니즈를 대응하기 위해 제품을 대량생산하여 판매하는 형태이다. 이는 기업이 재고 부족에 따른 손실을 줄이기 위해 과도한 양의 자재 수급을 의미하고 높은 재고 유지비용이 발생한다. 그리고 수요 대응에 실패한 제품은 관리 창고에 쌓여 있어 재고 보관비용이 발생하는 현실이다. 본 논문은 이러한 문제를 보완하기 위해 시계열 분석 기법인 ARIMA모형을 이용하여 계절적 요인과 같은 시간적인 변동성을 찾아 수요를 예측하고 이를 통해 경제적 주문량 모형 기반의 수요예측 모델을 개발하여 재고 부족 위험을 예방한다. 또한 시뮬레이션을 수행하여 개발 모델의 효용성 평가하고 향후 중소기업에 적용하여 개발 모델의 효과를 입증한다.