• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.271-273
• /
• 2001

We present a 4-parameter implicit Lagrangean code which satisfies conservation of mass, linear and angular momenta, energy and entropy simultaneously. The primary advantage of this scheme is possibility to control dissipative properties of the scheme avoiding the effects of numerical viscosity.

• Journal of computational fluids engineering
• /
• v.7 no.2
• /
• pp.8-16
• /
• 2002

A numerical study on the use of the momentum interpolation method for flows with a large body force is presented. The inherent problems of the momentum interpolation method are discussed first. The origins of problems of the momentum interpolation methods are the validity of linear assumptions employed for the evaluation of the cell-face velocities, the enforcement of mass conservation for the cell-centered velocities and the specification of pressure and pressure correction at the boundary. Numerical experiments are performed for a typical flow involving a large body force. The numerical results are compared with those by the staggered grid method. The fact that the momentum interpolation method may result in physically unrealistic solutions is demonstrated. Numerical experiments changing the numerical grid have shown that a simple way of removing the physically unrealistic solution is a proper grid refinement where there is a large pressure gradient. An effective way of specifying the pressure and pressure correction at the boundary by a local mass conservation near the boundary is proposed, and it is shown that this method can effectively remove the inherent problem of the specification of pressure and pressure correction at the boundary when one uses the momentum interpolation method.

• Water for future
• /
• v.27 no.4
• /
• pp.95-104
• /
• 1994

The sinuosity model has been developed to simulate to developed to simulate the floodwave in meandering channels by solving the extended Saint-Venant equation with the Preissmann scheme. The suggested model is compared with three conventional floodplain routing methods in terms of governing equations, mass conservation error and floodwave analysis. The sinuosity model produces the mass conservation error of 1.5-1.8%, however the separate channel model produces 9.1% and 27.4% for sinuosity of 1.5 and 2.0, respectively. The model has been used to simulate flow in an idealized meandering river with a floodplain. The attenuation ratio and the travel time ratio are found to increase as the floodplain roughness and width increase and as the sinuosity factor decreases. The model is expected to contribute the floodwave analysis in sinuous channel with compound corss sections.

• Journal of Plant Biotechnology
• /
• v.7 no.3
• /
• pp.175-181
• /
• 2005

This work described some essential factors necessary for micro-propagation of banana for mass production of synthetic seeds for germ plasm conservation, and how peroxides activity of conserved tissue was influenced. Shoot tips of field grown plants were used to obtain shoot clusters on shoot proliferation medium (MS medium supplemented with 5 mg/l BAP). Using longitudinally-split shoot tip technique, 18720, 8640, 7488, 2016 plantlets were obtained from one shoot tip of Maghraby, Grand Naine, Balady, and Williams, respectively, in six subculture, one month each, on solid medium. Shoot tips excised from in vitro grown plantlets were encapsulated in calcium-alginate beads and stored at $4^{\circ}C$ for one month on half-strength MS basal medium without growth regulators or sugars. After one month all the viable-conserved synseeds formed shoots when they were transferred to MS basal medium, some of them showed synchronous formation of shoot and root systems in one week. Plants retrieved from encapsulated shoot tips were hardened off and transferred to soil.

• Journal of Conservation Science
• /
• v.35 no.4
• /
• pp.295-307
• /
• 2019

In the process of the conservation treatment of the glass eyes of the stone standing Maitreya of Daejosa temple, Buyeo (Treasure No. 217), a blackish material, expected to be the adhesive for fixing the glass eyes, was collected and analyzed. Infrared spectroscopy and pyrolysis/gas chromatography/mass spectrometry (pyrolysis/GC/MS) were employed to identify the organic material in the sample. The IR analysis revealed the presence of materials such as apatite or bone black. The pyrogram of the sample was similar to that of Asian lacquer, among traditional adhesives. In particular, the pyrolysis/GC/MS analysis with online methylation detected 1,2-dimethoxy-3-pentadecylbenzene, methyl 7-(2,3- dimethoxyphenyl) heptanoate, and methyl 8-(2,3-dimethoxyphenyl)octanoate. These are known to be the pyrolysis products of catechol and its oxidation product, which indicated the presence of Asian lacquer in the sample. X-ray diffraction, X-ray fluorescence, and thermal gravimetry analysis showed that the sample contained ca. 60% inorganic substances, including apatite. Radiocarbon dating of the sample suggested that the blackish material was applied between the late 13^th and early 15^th century, revealing some discrepancy with the art-historical manufacturing time of the Maitreya. From the above analysis, it was concluded that Asian lacquer and bone ash were used to attach the glass eyes by forming a thick blackish lacquer layer.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.369-377
• /
• 2018

In order to examine the constituents and weathered state of a lacquer specimen, analysis of the organic materials was conducted using py/GC/MS(pyrolysis-gas chromatography-mass spectrometry). The samples were obtained from the lacquered wooden sheath of a long ring-pommel sword excavated in the Imdang No.1 ancient tomb constructed around the Proto-Three Kingdoms period. In direct py/GC/MS, the sample and the dried Asian lacquer showed similar chromatograms, while the characteristic compounds of Asian lacquer such as 1,2-dimethoxy-3-pentadecylbenzene were observed in THM(thermally assisted hydrolysis and methylation)-py/GC/MS. In addition, compounds like dimethyl nonanedioate, which presumably originated from drying oil, were also detected. Furthermore, the detection of oxidized catechols in considerable amount indicated that the degradation of lacquer is estimated to result from the oxidation of urushiol. Therefore, it is suggested that the lacquered wooden sheath was prepared using Asian lacquer and drying oil, and that the lacquer layer was considerably oxidized over the long burial time.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.209-216
• /
• 2019

Lead isotope ratios in horse-shaped bronze buckles excavated from the Songjeol-dong site in Cheongju and the mid-western region of the Korean Peninsula have been determined by thermal ionization mass spectrometry. The lead isotope ratios of the samples with data provenance were plotted in zone 3 of the South Korean galena map. The results indicated that the horse-shaped bronze buckles could be made using galena located in the same area as the archaeological site. These results can be used as basic data for comparison purposes in future studies on the manufacturing technology and provenance of bronze artifacts.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.108-113
• /
• 1998

A numerical investigation for the flow, heat and mass transfer characteristics of the grooved evaporating tube with the films flowing down on both the inside and outside tube walls has been carried out. The condensation occurs along the outside wall while the evaporation takes place at the free surface of the inside film. The 3-D transport equations for momentum and energy are solved by using the FVM(Finite Volume Method). The free surface shape is tracked by the moving grid technique satisfying the SCL(Space Conservation Rule). Due to the secondary motion of the fluid, the film thins at the crest, while thickens at the valley. The velocity and temperature fields as well as the amounts of the condensed and evaporated mass have been successfully predicted for various operating conditions and groove shapes.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.4
• /
• pp.262-268
• /
• 1992

The trend of international concerns on environmental conservation and domestic demand of ambient air quality improvement, specially on sulfur dioxide level has resulted in the establishment of mid-term strategy of environmental improvement and stepwise strengthening of emission regulations in this decade in Korea. Development of flue gas desulfurization(FGD) process is becoming an essential task to be accomplished especially for the power plants and large industrial facilities. This study is an initial stage researc focusing on the mass transfer principles in wet type FGD process and the effects of operating variables of a jet bubbling scrubber utilizing limestone slurry on sulfur dioxide removal efficiency. Experimental results showed this type of scrubbing system has some advantages in terms of mass transfer mechanism and removal efficiency. More rigorous research is needed for the reaction system and the comparison with existing FGD processess for the possible development of a process which is compatative in view of installation cost and treatment of by-products.

• Journal of the Korean Applied Science and Technology
• /
• v.20 no.2
• /
• pp.154-164
• /
• 2003

This paper has applied a simple model to the mass transfer mechanism of Cr(VI) with crownether in a batch-type, supported liquid membrane module. Concentration at pH 3 are as follows : 0.012 kmol/$m^3{\le}$18-crown-6${\le}$0.036 kmol/$m^3$ and 20 g/$m^3{\le}$ Cr(VI)${\le}$500 g/$m^3$. The measured values of forward- and backward-reaction rate constants between Cr(VI) and 18-crown-6 were used to simulate the model with the mass conservation equation and associated boundary conditions. Comparison between the experimental and simulated facilitated factor of Cr(VI) transport led to classification of reaction regions.