• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.297-305
• /
• 2005

A high-speed spindle can be very sensitive to rotating mass unbalance which has harmful effect on many machine tools. Therefore, the balancing procedure to reducevibration in rotating system is certainly needed for all high-speed spindles. An active balancing program using influence coefficient method and an active balancing device of an electro-magnetic type have been applied to the developed high-speed spindle system in this study. A reliable gain-scheduling control using influence coefficients of the reference model although system characteristics are changed is applied. The stability of reference influence coefficients is verified by frequency response functions. The active balancing experiment for the developed high-speed spindle during operation is well performed with an active balancing program and device. As a result, controlled unbalance responses are below the vibration limit at all rotating speed ranges with critical speed.

• 한국기계연구소 소보
• /
• 통권13호
• /
• pp.143-161
• /
• 1984

The mass balancing of rotors is an integral part of the study practice of the rotor dynamics. Any machine with rotating components is considered to be rotating machine. The part of a rotating machine that rotates in normal operation is generally reffered to as a rotor. A rotor is flexible if it deforms when the machine is operating at any speed up to its maximum design speed. Otherwise, the rotor is rigid. The general Purpose of the study of rotor dynamics is to increase understanding of rotor vibration phenomena and thus provide a means for controlling or eliminating these vitrations. As the efficiency of rotating machinery has been increased through reduced weight and increased speed, which implies increasement of rotor flexibility, the control of rotor vibration has become essential. Thus, the study and practice of rotor dynamaics has taken on an increasingly important role in recent years. Therefore many workers have studied about this and introduced a few balancing methods of flexible rotor, which can be classified mainly in following four sorts, 1. Polar plotting methed 2. Modal balancing method 3. Influence coefficient method 4. Unified balancing approach In this paper practical theories of rotor dynamics related to flexible rotor balancing have been reviewed and confirmed the calculation results of flexible balancing of typical rotor, as an example, respectively

• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.233-239
• /
• 2013

This paper presents the analysis and control of the position of the COG (Center of Gravity) for a two-wheel balancing robot. The two-wheel balancing robot is required to maintain balance by driving two wheels only. Since the robot is not exactly symmetrical and its dynamics is changing with respect to moving parts, robust balancing control is difficult. Balancing performance becomes difficult when two arms hold a heavy object since the center of gravity is shifted out of the wheel axis. Novel design of a sliding waist mechanism allows the robot to react against the shift of the COG by moving the whole upper body to compensate for the imbalance of the mass as a counter balancer. To relocate the COG position accurately, the COG is analyzed by force data measured from two force sensors. Then the sliding COG mechanism is utilized to control the sliding waist position. Experimental studies are conducted to confirm the proposed design and method.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.391-394
• /
• 2009

Asymmetrical and unbalanced features such as rotor blade of helicopter, actuator of hard-disk in personal computer are usually manufactured with composite materials. In this case, mass distributions and center of gravity of the parts are important because of their static balancing. Therefore in the manufacturing processes, it is needed to check out the exact data of weight and gravity center. In this study, it has been studied experimentally the balancing of laminated rotor blade by using multiple-point weighing method and lab-view system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.446-449
• /
• 2002

Quadruped walking robot requires dynamic control to keep its stability in high speed walking. To keep its walking stability by control of only legs' Joint angle lowers energy efficiency. It is known that an animal or a human use the moving of the mass center of one's upper body to keep the stability. We have developed a quadruped walking robot with weight balancing oscillator that have high energy efficiency. In this study, walking tests are performed for the robot to verify the validity of the weight balancing oscillator.

• 한국음향학회지
• /
• 제10권4호
• /
• pp.48-55
• /
• 1991

본 연구에서는 동적평형 방법을 이용하여 두 지지축대에 설치된 불평형 회전체의 평형을 바로 잡았으며, seven run method를 이용하여 보정질량을 산출하였다. 또한 평형잡이 전후 진동의 감쇠를 조사하였다. 실험결과 두 지지축대에서 측정된 진동의 진폭은 불평형 질량에 비례함을 확인하였으며, 위상각 측정없이 진동의 진폭 측정만을 필요로 하는 seven run method가 동적평형 방법으로 유효함을 입증하였다.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.61-67
• /
• 1998

Dynamic stability in rotation of the head drum of digital VCR is very important due to the nature of high rotation speed and small angular inertia. Therefore special considerations on reducing the unbalance and assuring the stability are required the design and manufacturing process. In this paper, newly developed digital head drum is introduced. And advanced methods in analyzing and reducing the unbalance is suggested. LDV(Laser Doppler Vibrometer) was used as a measurement system verifying our modeling and new method for balancing. Experiments show that the theoretical data estimated by modeling of shaft bending caused by unbalance mass and the measured data are almost identical. The deflection was reduced to 30％ by applying the suggested balancing method.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.35-41
• /
• 1998

A Self-compensating liquid balancer is proposed, which consists of the vessel contains liquid available to compensate for rotor unbalance, and the vessel provides four sets of suction pipe and reservior. Under the centrifugal field the liquid moves through the pipe from the side of the unbalance mass to the reservior located on the symmetrically opposite side. The liquid balancer was confirmed experimentally to be useful for the balancing of rotor over the critical speed, and the whirling amplitude after balancing decreases to almost constant value in spite of the location and size of unbalance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.568-572
• /
• 2001

An industrial vibratory conveyor system is devised for large-scale feeding by the low-power, using natural frequency of the system. The important thing in this system is to determine the natural frequency and to drive by it. The purpose of this study is to build up reliance on the system with changing of element parameters for vibration characteristics of balancing type vibratory conveyor by using F.E.M. modeling. For investigating the natural frequency, modal testing is performed by using impact hammer, accelerometer and LMS/Vibration Analysis System. Experimental results are compared with F.E.M results. The results of the comparisons within the errors of less than 2 percent can verify the reliability of the F.E.M. analysis of the system. Also we can verify that the characteristics of natural frequency have linearly decreased(-6%) as adding the mass($50{\sim}600kg$). We can find that controlling driving frequency is necessary for triggering the natural frequency, but natural frequency is less affected by adding the mass on the balancing weight.

• 동력기계공학회지
• /
• 제11권1호
• /
• pp.134-139
• /
• 2007

A delivery ship is used to handle the cargo with the crane to/from the ships. The ship is inclined in the direction of a cargo which is hung on a crane. In this case, a arc shaped rail should be in the equilibrium state to get good anti-rolling performance. In this study, a device and control algorithm are developed to take accurate and quick equilibrium of the rail. The device is composed of a hinged immovable support, screw jack and damper. And the control system is based on I-PD control law to consider of control input saturation and overshoot. The controller is composed of integral controller of feedforward path and proportional-derivative controller of feedback path. The parameters of controller is designed to follow the reference signal and to remove overshoot. The simulation results show that the desirable control performance is achieved.